Deepak Mourya

Dear Sir,

Please find attached resume for the post of Maintenance Engineer/Electrical Engineer.

Previously worked in Abu Dhabi(NOV) and Saudi Arabia(GSW) as a Maintenance Team Lead and Electrical Engineer respectively.

12 years of good Maintenance work Exposure in handling plant and Machine Maintenance along with team handling, good problem solving capabilities and Decision making.

Capable of handling entire maintenancne activities without any supervision.

Preventive Maintenance, Breakdow Maintenance, Crane Maintenance,5S,Mtbf ,mttr,spare parts planning,vendor Management,AMC ,CAPA,Kaizen,plasma cutting machine ,High speed water jet cutting,Cnc bending machines, CNC machines with fanuc and Siemens controls and Galvanizing process,Furnaces and calibration of instruments are few areas of my expertise.

Regards

Deepak Mourya

0504268959

I am looking for the position of Maintenance Engineer/Electrical Engineer in any steel plant where I can utilize my 12 years of expertise in handling Plant ,facilities and machinery maintenance.

• Karamtara Engineering Pvt ltd,(Mumbai),(Galvanizing Plant).

Duration:25th July 2020 to 8th Nov 2021. Designation: Shift Incharge (Electrical Engineer)

Area of Responsibility:-

• Responsible for planning, monitoring and supervising all activities associated with Maintenance Team.

2)Assist in troubleshooting and repairing of mechanical, hydraulic, and pneumatic, furnaces and electrical/electronic equipment including but not limited to programmable logic controls(PLC), fanuc and Siemens controls cnc machines, SCADA,HMI.

• Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown.

4)Handling Galvanizing plant maintenance actives like Gas fired furnace(lpg),trouble shooting of furnace PID Control panels, blower,Temperatire variations,drives,Burner controllers,Cranes maintenance activities,quenching tank,acid tank,flux tank,Heaters,flame rod sensors etc.

• Maintains company-required performance and maintenance records for identified equipment.
• Perform or assist in fabrication, preventative maintenance and routine machine checks up and assists maintenance personnel with technical troubleshooting.
• Assist plant to run with full production capacity by providing good housekeeping,spares parts availability,reduced monthly breakdown by implementing Kaizen,why-why analysis and corrective action and preventive action(CAPA).
• Promote and maintain a clean, organized and safe work environment through 5s activities.

9)Assist Dept in maintaining spare parts for overall plant by raising material request through SAP,AIMMS for electrical,mechanical,electronics etc by close follow up with purchase team and external vendors.

10)Assist Maintenance HOD in providing daily ,weekly and month report required for generation of Monthly KPI report,Breakdown Analysis report,Critical spare list and any other issue related to plant breakdown.

• Communicate effectively with others at various levels using both oral and written communication skills.
• Perform other duties as required.
• National Oil well Varco, ICAD II, Abu Dhabi.

Designation: Maintenance Team Lead.

Duration:26th Dec 2018 to 20th Oct 2019 Designation:Maintenance Team Lead.

Area of Responsibility:-

• Responsible for planning, monitoring and supervising all activities associated with Maintenance Team.
• Responsible for maintaining efficiencies and team measurable through maintenance principles and practices, human resources planning, and flexibility.
• Assist in troubleshooting and repairing mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives.
• Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown.
• Advises operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components.
• Maintains company-required performance and maintenance records for identified equipment through ERP system (AIMS).
• Perform or assist in fabrication, preventative maintenance and routine checks of machines and assists maintenance personnel with technical troubleshooting.
• Assists and trains other maintenance and/or other technical level employees. Will assist in planning and facilitating new and existing associate training.
• Participate in a teamwork atmosphere and contribute to various continuous improvement projects and Kaizen activities, such as standardized work improvements, cost control and spare parts management.
• Promote and maintain a clean, organized and safe work environment through 5s activities and proper disposal of waste materials.
• Involved in long-term planning in relation to major projects, equipment installation, property improvements and regular follow up with vendors.
• Successfully lead and function within a team environment and be able to adapt to change.
• Responsible for all necessary reporting and required paperwork.
• Communicate effectively with others at various levels using both oral and written communication skills.
• Perform other duties as required.
• Gulf Steel work: Al Jubail, Saudi Arabia.

Duration:5th May 2018 to 15th Sep 2018 Designation:Electrical Engineer.

Area of Responsibility:-

• Managing Maintenance team of Supervisors and Electricians.
• Trouble Shooting, Preventive & Breakdown maintenance of CNC Machine and Cladding Machines.
• Preparing MTTR, MTBF, KPI, HISTORY CARD.
• Fault finding in PLC and CNC Control system likes Fanuc,Siemens.
• Work allocation to manpower and their shift planning.
• Spare part planning and stock maintenance with the help of MIS System.
• Making indent of different material and follow up with the parties to receive material on time as per monthly planning.
• Juaristi Oriental Engineering services,(Authorize Service partner Juaristi Spain).

Duration: 1st Feb 2017 to 20th March 2018 Designation:Asst.Manager Service

Area of Responsibility

1)Managing team of service engineers with their service visit at client locations.

2)Managing day today complaints from clients by providing service support and spare parts.

3)Day today Follow up with clients to ensure timely completion of service visit and ensure that clients problems are fully resolved.

4)Spare parts planning as per clients P.O and ensure that it is timely delivered and critical stocks are maintained in store.

5)Payments follow up for pending payments from client side and ensure it is timely received as per monthly targets.

6)Keeping track of engineers expenses (to and fro,loading boarding )are done as per company rules and are within limits.

7)Ensuring day today machine installation,AMC and trials are conducted within provided time frame with proper documentation.

8)Working on SAP module for material request , Consumabule spare and Critcical spare parts.

• BEBITZ FLANGES WORKS PVT LTD, BOISAR (TARAPUR).

Duration: 1ST Jan 2013 To 2nd Jan 2017 Designation: Sr. Electrical Engineer

Division: Forging and CNC.

Company Profile: Bebitz Flanges Works Pvt Ltd is a 100% export oriented unit. M/s BFWPL popularly known as BEBITZ Flanges is a sub diary unit of its parent company M/s Flanschenwerk BEBITZ GmbH which was started in 1911 to produce all varieties of stainless steel, carbon & alloy steel. The parent company M/s Flanschenwerk BEBITZ GmbH was acquired by the Viraj group in Dec 2003 and since then its operation is running successfully in BEBITZ Germany.

Area of Responsibility:-

• Managing Maintenance team of Supervisors and Electricians.
• Preparing energy and fuel report on daily basis of overall plant.

3)Trouble Shooting ,Preventive & Breakdown maintenance of CNC machine likeVMC,CNC lathe(Ace micromatic,jyoti, lokesh and special purpose machine like muratec, gnutti and porta.

• Preparing MTTR, MTBF, KPI, HISTORY CARD and Working on 5S System, why-why analysis, Kaizen, TPM.
• Fault finding in PLC and CNC Control system likes Fanuc,Siemens(802D),Haas and Heidenhain iTNC 530.
• Trouble shooting, preventive & breakdown maintenance of D.G set (750 kva)

Stabilizer, compressor (250 cfm and1000 cfm), cranes (5 ton to 30 ton).

• Hands on different contractor, relay, Timer, drives, plc, scada etc.
• Work allocation to manpower and their shift planning.
• Spare part planning and stock maintenance with the help of ABAS ERP System.
• Making indent of different material and follow up with the parties to receive material on time as per monthly planning.
• Maintenance of 33KV Sub station includes Transformer, Lightening arrester, Isolator H.T and L.T panels.
• Keeping Records of AMC Contracts for Siemens control machine, DG Set, Stabilizers, UPS System, Panel cooler of CNC Machine.

1)ELECTRONIC

ENGINEERING FROM AMRUTVAHINI COLLEGE OF ENGINEERING (PUNE UNIVERSITY),MAY 2009.

2)DIPLOMA IN ELECTRONICS ENGINEERING FROM JAIHIND POLYTECHNIC,(MUMBAI UNIVERSITY),APRIL 2006.