Essaid Elhabibi

Completion and commissioning manager offshore

كفاءة

Abu Dhabi, أبوظبي250 AED/ساعةعضو منذ ٢ أبريل ٢٠٢٣

استعن بخدماته

اطلب عرض سعر بدون التزام

commissioning managerelectrical engineercompletion manageroffshore engineerwind turbine technician

نبذة

Completion and Commissioning Manager offshore EPC Oil and Gas +wind turbine offshore

الخبرة

CAREER HISTORY

Control Contracting & Trading Company (CCTC) (from 9 May 2022)

Current Designation Completion &Commissioning Manager

Project 1: 11Kv Load migration from PGP to PDP UCC ADNOC offshore 60 MUSD

Project 2: Replacement of EDGS and LV system upgrade LOWER ZAKUM FIELD ADNOC offshore 50MUSD

Project 3: Scope of FOUR (4 nos.) site Schemes in IN UPPER ZAKUM FIELD ADNOC offshore 47 MUSD

Responsibility

Pre-com &Commissioning Execution Plan Development
Pre-commissioning and commissioning procedures
Integrated Project Schedule Development
Systemization of Plot Plans, PFDs, P&IDs & Specialty Equipment, Single Line Diagram, Cable Runs,

Safety Instrumented Systems, and instrumentation

Completion strategy
HSE plan and LOTO procedure
Systems & Subsystem breakdown
Vendor Coordination and vendor management and Surveillance and inspections for project equipment
Staffing plan/ Mobilization plan/OEM mobilization plan.
Follow up on Site Pre-commissioning and Commissioning activities for all disciplines.
Commissioning planning Level 4 and Level 5
Lead and attend weekly meetings/monthly meetings (progress, status, ..)
Attend FAT/SAT
Lead PSSR (Pre-Start-up Safety Review)

SSE Renewables (from August, 2021 to April, 2022)

Current Designation (E&I Commissioning Engineer)

Project 1: Seagreen offshore wind farm Topside.

Responsibility

Offshore Substation Platform (OSP) Topside Precommissioning,commissioning , Completions, and Handover ,

GIS 66KV Circuits 1,2 and 3 (ABB)
GIS 220KV Circuits 1,2 and 3 (ABB)
Transformers 220KV/66KV 390MVA (koncar) and auxiliary Transformers 66KV/0.415KV
Relay panels for GIS 66KV Circuits 1,2 and 3 ( ABB Relay REL650,REF 620,REB650,REB670)
Relay panels for GIS 220KV ( ABB Relay RED670,REC670,REF 620,RET615,RET670 and GE P40)
LV 415KV switchgear (ABB), SCADA (ABB), AC/DC UPS (Schneider), Fire & gas , inert gas, CAF and

HVAC.

Telecommunication.

Alasab General Transportation and Contracting LLC (November, 2020 to July, 2021)

Designation (E&I Construction and Commissioning Manager)

Project 1: ADNOC onshore/offshore EPC for Rumaitha Thamama Zone B Phase III Expansion Development

,Project Value: 175M$

Responsibility

Managing of Construction and Commissioning for new clusters and existing clusters.

OHL 33KV, ETR and ITR, Wellhead control panels and Chemical injection
Oil production, Gas lift, Water injection, Gas injection
Hot loop check, Tubing flushing, Pressure test, Hydro-test and Leak test

Petrofac International Ltd (October, 2018 to November, 2020)

Designation (E&I Principal Commissioning Engineer)

Project 1: TURKSTREAM, EPC, Client South stream, Turkey, Project Value: 400M$

Project 2: ADNOC onshore Qusahawira Field Development Phase II, EPC Abu Dhabi UAE, Project Value: 580M$

Responsibility

EI&T Lead Commissioning Engineer for GIS, MCC’S, LV Switchgear’s, 3 GEG (1 MW), OHL 33Kv, CDS,

WELLPADs, GLOPWH, WAGWH and GS2

Commissioning Execution Plan Development (also Discipline Plans)
Integrated Project Schedule Development
Systemization of Plot Plans, PFDs, P&IDs & Specialty Equipment, Single Line Diagram, Cable Runs,

Safety Instrumented Systems and instrumentation

Development of Turnover Folders, Systems Walk-down Packages, Pre-Commissioning, Commissioning

Procedures and Loop Folders

Implementation of LOTO P&IDs
Systemization of Systems & Sub system and MC Walk-downs
Vendor Coordination and vendor management and Surveillance and inspections for project equipment

JACOBS ENGINEERING (June, 2016 to September, 2018)

Designation (Deputy Commissioning Manager)

Project 1: Merah Khouribgha and Laayoune Mining EPCM, client OCP Morocco.

Responsibility

Ensure the safety, quality, value, timeliness of the project.
Develop, manage, and execute all commissioning and related activities in conformance with Jacobs engineering SA policies and procedures, contracts, plans, specifications, schedules and cost estimates.
Manage and supervise the commissioning of various systems including MV Electrical System, Generator engines, Mechanical and piping Systems, Integrated Automation Systems, Safety and Fire Systems.
Work closely with various stakeholders including OCP as client, The Project Manager, Engineering

Manager, Quality Manager and Construction team to provide subject-matter expert advice leadership.

Projects 2: Owner Project Investment (ODI) is one of the largest fertilizer EPCM projects in the world,

ODI1, ODI2, ODI3 and ODI4, Project Value: 2.5 billion usd

Responsibility

Improve the ODI Electrical systems break down, mark-up, operation test procedure…. Provide guidance to the Electrical discipline in accordance with contract agreement
Commissioning and startup Switchyard 60/10Kv 72MVA, Steam Turbine Generator 60MW, VFD, SST,

UPS, DC&AC batteries, MCC, MV Cells, ABB Relays and MV/LV Transforms 11Kv/0.42k, Start–up of units OSBL, SAP, PAP and DAP.

VINCI GROUP CEGELEC (September, 2011 to April, 2016)

Designation (Electrical Commissioning lead)

Projects : ODI 1, ODI 2, ODI 3 and ODI 4 Switchyard 60KV/10KV (Client JACOBS/OCP):

Responsibility

Follow up of quality inspections, Implementation of quality program.
Pre-commissioning of HV equipment’s (CT&VT, HT CB, Disconnectors & transforms 60/10 KV), MV panel ABB (Relays REF630, REF620, REF615, REB615, RED 615, REM620) and (LV PANEL, DC and

AC UPS AEG)

SCADA System of Switchyard 60KV/10KV (Relays F650, T60, MICOM P543, CC1000 and EPM600)
Commissioning and configuration of equipment (VFD et starters MV (Siemens), VFD LV (Siemens), MCC

(Siemens & Allen Bradley) Control and command of HV substations, MV PANEL ABB).

Commissioning with configuration of equipment’s, VFD (Schneider Electric), Protection Relays (Tesys)

and MCC (Okken)

Configuration and tests of energy metering system Iton SL7000 and power quality monitoring Alpes technology of Switchyard 225Kv of KHOURIBGA

Project : Renewable energy Wind Turbines farms onshore

WIND FARM HOUMA (50.6MW), 22 Siemens turbines with a unit capacity of 2.3 MW
WIND FARM FOUM EL OUED (50.6MW), 22 Siemens turbines with a unit capacity of 2.3 MW
WIND FARM AKHFENIR (101.87MW) 61 Alstom turbines with a unit power of 1.7 MW

Responsibility

Engineering

Preparation of design review , project specifications and philosophy for electrical equipment
I was also involve on Materiel procurement (preparations of material requisition ,vendor offer review ,

technical review and preparation purchase order )

Gate review and constructability review
Supporting Engineering team to develop GA drawing , Wiring circuit diagram , layout drawing for the

Switchyard 22KV/60KV

Reviewed and approved Cable size study for 22KV cable (WT) for Circuit 1,2,3 and 4
Coordination with vendors engineering department document review and approval (Schneider, Nexans, and

Siemens, AEG (UPS and batteries)).

Review Fire and gas drawing developed by vendor (GA drawing , loop diagram , layout drawing, termination drawing for JB and f&G Panel )
Supporting our engineering team for Lighting/Earthing /lightening for the switchgear 22kv/60KV Drawing
Reviewed and approved Cable routing and cable trouches was developed by our subcontractor

DELIVERABLES (OFFICE- ENGINEERING & PROCUREMENT STAGE)

System and Subsystem Breakdown (E&I-HVAC-Telecom)
Preparation of “Project Preservation Procedure”
Preparation of Method Statement
Preparation of “Operational Test Procedures” (OTP’s for energization)
Vendor Document Review (Factory Acceptance Test “FAT”/ Site Acceptance Test “SAT”, Asset Integrity

Management System “AIMS”) “Commissioning Spares Parts, Special Tools & 2 years Warranty Spares list”

Review & Approval

Attend Factory Acceptance Tests – issue FAT report- Track down Outstanding Punch (if any)
Population of Pre-com & Com activities within Completion Management Database
Establish Ready For Commissioning (RFC)/ Ready For Start Up (RFSU)/ Ready For Hand Over (RFHO)/

Provision Acceptance Certificate (PAC)/ Final Acceptance Certificate (FAC) Hand over procedure

Establish (by priorities) Commissioning & Start up Sequences & Vendor Mobilization Schedule
Preparation HSE Commissioning Plan (LOTO)

DELIVERABLES (SITE- CONSTRUCTION – PRE- COM & COMMISSIONING STAGE)

Follow up the Project Equipment Multidiscipline Preservation activities
Follow up cable pulling, termination, glanding , electrical equipment erection .
Ensure PTW ,coordinate work with other discipline
Supervise Cables Continuity & Insulation & Hi-Pot & Bus bar torqueing, Relay Protection Setting

Calibration, Loop testing …activities

Attend Mechanical Completion Walk-downs by Sub system
Follow up the Site Acceptance Testing & Mechanical Completion punch items close out & MC/RFC/ RFSU

Cert. Status