Ahmed Jama

18 years of experience – 3 years in schooling and 15 years in the field. Expertise in commissioning, pre-commissioning and loop checking. Skilled in tube bending, calibrating, installing and programming. Very friendly and helpful with strong ability to interpret and follow P&ID's, instrument location drawings, and isometrics. Flexible and able to relocate.

Instrumentation Technician - AllNorth Consultants ltd.

(2024-10)

• Commissioning, and troubleshooting for instrument devices
• Compressor control System (Vibration, RTDs, Speed sensors)
• Verifying and updating any changing for transmitters settings
• Daily progress report
• Redlined and correcting loop drawing
• Shooting back to Control room for verifying instrument working
• Very friendly and helpful – never have problems with co-workers
• Interpret and follow, P&ID's, instrument Location drawings, isometrics.

Foreman - Dynamysk Automation

(2023-12 - 2024-10)

• Commissioning, Pre-commissioning, loop checking, and troubleshooting for instrument devices
• Motor Control System (Vibration, RTDs, Speed sensors)
• Verifying and updating any changing for transmitters settings
• Daily progress report
• Redlined and correcting loop drawing
• Shooting back to Control room for verifying instrument working
• Very friendly and helpful – never have problems with co-workers
• Interpret and follow, P&ID's, instrument Location drawings, isometrics.

Instrumentation Technician - Novus technical Service - FPSO offshore

(2023-03 - 2023-10)

• Commissioning, Pre-commissioning, loop checking, and troubleshooting for instrument devices
• Verifying and updating any changing for transmitters settings
• Installing and replacing old instruments
• Completed and submitted smart compilation
• Redlined and correcting loop drawing
• Shooting back to Control room for verifying instrument working
• Very friendly and helpful – never have problems with co-workers
• Interpret and follow, P&ID's, instrument Location drawings, isometrics.

Instrumentation Technician - Kent Automation - Nova Chemicals Sarnia

(2022-11 - 2023-03)

• Pre-commissioning/ Commissioning
• Troubleshooting, wiring, and testing
• loop-checks and troubleshooting (I/O (Input/Output) checking and troubleshooting)
• Stroke test of pneumatic, hydraulic and motor-operated valves
• Calibration checks of field instrumentation
• Installation inspection against design documentation

Instrumentation Technician - ClearStream Energy

(2022-07 - 2022-10)

• Installation inspection against design documentation
• interlocks, alarms, & controls performance verification
• Installing and verification of devices
• Installing and verify Instrument location
• Creating punch list
• Built Instrument tray and bending tube

Instrumentation Technician - Dynamysk Automation

(2021-11 - 2022-06)

• Pre-commissioning/ Commissioning
• Troubleshooting, wiring, and testing
• Cause and effect matrix checks
• Loop-checks and troubleshooting (I/O (Input/Output) checking and troubleshooting)
• Stroke test of pneumatic, hydraulic and motor-operated valves
• Calibration checks of field instrumentation
• Installation inspection against design documentation

Instrumentation Technician - Syncrude Oil sand - Norcon Electrical Shutdow

(2019-04 - 2019-06)

• Troubleshooting, calibrating, and installing new instruments.
• Oxygen & combustibles Analyzer SMA 90 (smart analyzer)
• Fire and gas detectors checked and testing
• pH Analyzer testing and calibrating
• Differential flow measurements and pressure installing and calibrating
• Tuning controllers (PID)
• Checked any leak for the Valves
• Verified All the reading of the instrument are correct

Electrician - Home and Warehouse Renovation

(2018-02)

• Wiring a residential houses and warehouses
• Installed reciprocals, lights bulbs
• Bent conduits and pulled wires through the conduit
• Maintenance and replaced all defective equipment of the building

Instrumentation Technician - Suncor - Ledcor

(2017-03 - 2018-01)

• Installing Instrument and tubing
• Inspection check for instrument
• Creating punch list
• Pre-commissioning using (HART 475, Fluke 754,789)
• Changing tag #, verify Instrument ranges....
• Tube bending and built cable tray
• Installing instrument using Instrument location drawing or PID

Instrumentation Technician - Fort Hills, Suncor - PCL Energy

(2017-06 - 2017-12)

• Installing and verify Instrument location
• Creating punch list
• Built Instrument tray and bending tube
• Inspected instruments are right location with PID

Instrumentation Technician - PME Inc.

(2017-02 - 2017-05)

• Loop check and troubleshooting
• Calibration and Verify Instrument ranges
• Installing and removing Instruments
• Checking with DCS proper reading for Instrument

Instrumentation Technician - Ledcor Mod yard - Encana

(2017-01 - 2017-02)

• Inspection check for instrument
• Creating punch list
• Pre-commissioning using (HART 475,Fluke 754,789)
• Changing tag #, verify Instrument ranges....

Instrumentation Technician - North West refinery - PCL Intracon Power, Redwater, Alberta Canada

(2016-09 - 2016-12)

• Bent tubes; raceways; torque and Installing new Instrument
• Loop check, troubleshooting and re-installing if needed.
• Reading PID to Verify the location of the Instrument

Instrumentation Technician (Maintenance) - DCM - CNRL

• Troubleshooting, calibrating, and installing for new instruments.
• Oxygen & Combustibles Analyzer SMA 90 (smart analyzer)
• Fire and gas detectors weekly check
• pH Analyzer testing and calibrating
• Differential flow measurements and pressure installing and calibrating
• Tuning controllers (PID)

Instrumentation Technician - Kentz Engineering - Syncrude oil sand (MLMR)/ Nabiye Project in Cold Lake, Kearl Lake (Imperial Oil Sand)

(2014-05 - 2015-05)

• Pre-commissioning/ Commissioning
• Troubleshooting, wiring, and Testing
• Installation inspection against design documentation
• interlocks, alarms, & controls performance verification
• Cause and effect matrix checks
• loop-checks and troubleshooting (I/O (Input/Output) checking and troubleshooting)
• Stroke test of pneumatic, hydraulic and motor-operated valves
• calibration checks of field instrumentation
• Smart Transmitters
• Differential flow measurements and pressure

Instrumentation Technician (Maintenance) - Nexen Oil Sand - Fort Mcmurray, Alberta Canada

(2013-11 - 2014-03)

• Troubleshooting, maintains, calibrating, and installing for new instruments.
• Oxygen & Combustibles Analyzer SMA 90 (smart analyzer)
• Fire and gas detectors
• pH Analyzer
• Differential flow measurements and pressure
• Tuning controllers (PID)
• I/P calibrations

Instrumentation Technician - MMR Construction - Kiewit Modyard, Edmonton, AB

(2013 - 2013-07)

• Tube bending and built cable tray
• Installing Instrument using Instrument location drawing or PID

Instrumentation Technician - Triton Projects Ltd. - Lamont, AB

(2012 - 2013)

• Bent tubes; installed new transmitters including flow, pressure And temperature transmitters
• Installed gauges

Instrumentation Technician (Maintenance) - Pyramid Corporation - Spartan Control, 2012 Flint Energy, Edmonton, AB

(2012 - 2012)

• Built valves and actuators; installed new instruments
• Bent tubes; Torque; tested for leaks
• Inspected all new toys (speed control, gauges, regulators, switches)

Instrumentation Technician - PCL Construction - Kearl Lake Projects

(2012 - 2012)

• Bent tubes; raceways; torque and Installing new Instrument

Electrical/Instrument Technician (Maintenance) - Manitoba Hydro - Selkirk, MB

(2009 - 2001)

• Measured voltage
• Taken readings Gauges, transmitters and reporting any malfunctions
• Collected samples of transformer oil
• Maintained transformers

Diploma - Instrumentation Engineering Technology - Red River College (2009 - 2011)