Skip to main content
Ajay Ghuman

Ajay Ghuman

MECHANICAL TECHNOLOGIST

Talent
BramptonMember since November 13, 2026
Quality assuranceQuality controlMechanical troubleshootingCMM operatorPLC diagramsHydraulicsPneumaticsPumpsConveyorsSiemens SMT operator/programmer
·

Hire this person

Send a job offer directly to this candidate

Quality assuranceQuality controlMechanical troubleshootingCMM operatorPLC diagrams

About

Competent Quality Supervisor and Maintenance Technician with 20 years of experience maintaining peak results. Talented at investigating and adjusting processes by implementing quality assurance and control systems. Skilled at managing personnel and promptly addressing issues

Experience

Quality Supervisor at Millomat Stamping (2025-07 – 2026-10)

  • Led regular team meetings to review performance metrics, identify areas of improvement, and develop action plans for progress.
  • Conducted root cause analyses on recurring defects leading to long-lasting solutions and increased customer satisfaction.
  • Reduced customer complaints by addressing root causes of quality issues and driving continuous improvement initiatives.
  • Maintained QA programs.
  • Developed monthly reports showing inspections and improvements.
  • Used GMS to bring company into modern industry standards.
  • Enhanced product quality by implementing stringent inspection processes and providing comprehensive feedback to production teams.
  • Implemented new quality assurance and customer service standards.
  • Scheduled and chaired quality review meetings to review effectiveness of performance mitigating risk, improving throughput and achieving customer satisfaction.
  • Reported production malfunctions to managers and production supervisors.
  • Assured consistent quality of production by implementing and enforcing automated practice systems.
  • Established and tracked quality department goals and objectives.
  • Developed quality planning for multiple new product launches by verifying customer requirements and implementing in design and production.
  • Inspected products and worker progress throughout production.
  • Determined quality department standards, practices, and procedures.
  • Supported audits and led teams to fully investigate quality control processes and root out deficiencies.
  • Maintained testing equipment in good working order to effectively quality control many production lines.

Lab Test Technician (P/T) at CAN-BEST (2025 – 2026)

  • Worked full-time and part-time.
  • Implemented comprehensive test plans to evaluate product functionality, safety, and performance according to North American standards.
  • Communicated product failures and testing problems with the IG and Testing departments.
  • Performed mechanical troubleshooting to identify reliability issues with material.
  • Reduced test malfunctions by maintaining and calibrating test equipment regularly.
  • Installed laboratory equipment and instrumentation for tests, research and process control.
  • Leveraged strong analytical skills to identify trends in test data, providing valuable insights for continuous improvement initiatives.
  • Updated quality control records and reports.
  • CMM operator.
  • Trained other workers in inspection and testing procedures.

Maintenance at Messer Canada (2022-09 – 2025-06)

  • Inspected installation of mechanical equipment.
  • Repaired and installed dock doors and dock lifts/plates.
  • Maintained quality control of various cylinders.
  • Identified faulty equipment, made adjustments to machinery, and ran diagnostic tests.
  • Analyzed tests and validation data.
  • Implemented GMS standards.
  • Filled/inspected almost every type of gas for the manufacturing, food & beverage, and health industries.
  • Troubleshooting mechanical issues.
  • Took care of plant coolers and heaters.
  • Drove a floor scrubber occasionally throughout the plant.
  • Inspected and tested mechanical equipment.
  • Assembled and dissembled complex mechanical equipment.
  • Interpreted and edited PLC diagrams.
  • Conducted mechanical maintenance (hydraulics, pneumatics, pumps, conveyors, etc.)
  • Oversaw maintenance and repair of shop equipment.
  • Documented processes to streamline setup, customization and maintenance.
  • Developed and implemented preventive maintenance procedures.

AZ Driver at Salit Steel (2018 – 2022)

  • AZ driver.
  • Performed daily safety inspections and average repairs.

Technologist Supervisor/ Maintenance at Datec Coating Corp. (2012 – 2018)

  • Manufactured integrated heaters for the food, health, and automotive industries.
  • Prepared standards and schedules.
  • Conducted preventative mechanical maintenance on machines and tools (hydraulics, pneumatics, gears, pumps, conveyors, etc.)
  • Used floor scrubbers throughout the plant.
  • Performed quality tests in the lab.
  • Interpreted engineering sketches, specifications, and drawings.
  • Made estimates and estimated operation costs.
  • Conducted quantitative failure analyses of operational data.
  • Documented design or operational test results.

Q.A. Technician at Coordinate Industries (2010 – 2012)

  • Worked in the Quality Control lab.
  • Inspected and approved FAI's for the aerospace industry
  • Used tools and machines to take accurate measurements (CMM, Vernier, Gauges, etc.)
  • Worked with inspectors from Bombardier, Boeing, Canadian Air Force, etc.
  • Evaluated samples against standards by completing measurements, visual inspections, and other established tests.
  • Achieved quality assurance operational objectives by preparing and implementing production, productivity and customer-service standards.
  • Provided regular updates to team leadership on quality metrics by communicating consistency problems or production deficiencies.
  • Evaluated effectiveness of corrective actions, making adjustments as necessary to maintain high levels of quality performance.
  • CMM operator.
  • Documented testing procedures for developers and future testing use.
  • Analyzed test data to determine performance and reliability of materials
  • Performed thorough inspections of incoming materials and outgoing products.
  • Enhanced production efficiency by streamlining quality assurance processes and implementing best practices.
  • Assisted in external audits, showcasing company’s commitment to maintaining high-quality standards throughout its operations.

SMT Operator/Programmer at Creation Technologies (2009 – 2010)

  • Worked as a Siemens SMT operator/programmer.
  • Interpreted PLC diagrams.
  • Performed quality tests to check if PCB boards passed or failed.
  • Calculated required capacities for equipment of proposed system to obtain specified performance.
  • Produced a high volume of products for the electronics, health, and military industry.
  • Performed maintenance on the Siemens machines every month.
  • Assisted engineers to design, develop, test, or manufacture products.

Quality Control Technician at Phoenix Quality (2007 – 2008)

  • Performed quality tests using various measuring tools on automotive parts
  • Created reports showing results of tests and analyzed results
  • Tested characteristics of materials
  • Analyzed test and validation data. Document design measurements
  • Trained new team members on proper quality control techniques, fostering a culture of excellence within the department.
  • Proposed corrective actions to address recurring quality issues.
  • Developed and implemented quality control processes to meet product standards.
  • Reduced customer complaints by proactively addressing potential issues before products left the facility.
  • Maintained quality documentation and records for conformance with relevant standards.
  • Collaborated with production staff to improve processes, reduce defects and optimize quality.
  • Helped uncover and fix production problems in order to reduce overall defect rates.
  • Inspected raw materials and finished products to verify quality and disposed items that did not meet safety requirements.
  • Maintained accurate records of all quality control activities, ensuring easy retrieval for audits or management inquiries.

Junior Engineer at SKD Automotive Group (2007 – 2008)

  • Inspected mechanical installation and construction
  • Conducted tests and analyzed results of automotive parts
  • Provided technical support to other employees regarding mechanical design, and fabrication
  • Assisted engineers to design, develop, test, and manufacture industrial machinery and consumer products
  • Collaborated with engineering team to determine project specifications.
  • Studied corrections from senior engineers to learn and grow professionally.

Education

Ontario Advance Diploma in Mechanical Engineering Technology – Sheridan College (2008-01)

Ontario Secondary School Diploma – Turner Fenton S.S. (2005-01)

Skills

MECHANICAL TECHNOLOGIST

Reviews