Concrete,Clay and Forming Operator/ Machine Operator / Payloader Operator /Driller Operator/ Quarry laborer/ Heavy Equipment Maintenance - Ganicor Inc. - 450 10e Rang St. Gedeon Quebec Canada
(2023-09)
- actual check of daily preventive of all hydraulic driller machines,level of oils , gas and lubricants, before use..
- actual check of all heavy equipment.level of gas level of oils and lubricants.
- Do check all generators oil level, gas and lubricant
- prepare all tool that will use in drilling operations
- operate hydraulic drilling machine
- operate tractor driller machine
- split the block using jack hammer with air compressor
- Take the splitted block using forklift loader with 40 tons lifting capacity and transfer it to the stock area.
- sometimes we use dinamite for blasting to split big size of stone block
- I do repair hydraulic driller, heavy equipment and other machines when machines and equipment are broke. Even mechanical or electrical problem.
- fabricate some still rack, tables and other fabrication project that will be use in quarry operation.
- Operate wiresaw machine to cut the block..
- Check and prepare the stone block that is scheduled for cutting by using forklift truck
- Check the overall condition of machine before operate; gear oils, motors, different buttons and settings of machine.
- Put the stone block in cutting table of machine by using 10 tons overhead crane.
- Set the setting of machine base on actual plan..
- After cutting the stone placed on the cuttiNg table, I will double check the size with a meter tape.
- After I get the right size, I take it to the next machine process.
Production Operator / Production Maintenance - House Technology Industries Pte., Ltd. / Wukong Singapore PTE., LTD. - Block 25C&D, Phase IV, Expansion Area, Philippine Economic Zone Authority Rosario, Cavite, Philippines
(2013-09 - 2023-09)
- Maintain good quality and good condition of machine to avoid delay of production mass.
- Preventive of Machine on time schedule.
- Repair and Troubleshoot machine quickly to avoid schedule lag.
- Read the endorsement logbook from the other shift that I replaced. If all machines have no trouble encountered during the duty time of my replacement.
- Roving and check all machine in my assigned area.
- When I see that the machine is faulty, I will immediately repair it to prevent serious damage to it.
- Review preventive machine schedule for the day in our preventive monitoring board.
- Prepare all tools, parts, equipment, oil lubricants and belts to be used in preventive of machine.
- Cleaning of whole machines
- Putting of grease oils and lubricants
- Replace damage parts and damage bearings
- Checking of resistance of motors
- Checking and Replace of Belt
- And Checking of possible damage of machine including machine controls
- When preventive of machine is done: Conduct trial of machine before turn over to production.
Production Maintenance Staff - PV TECH PTE. LTD. - Cavite Economic Zone II, Rosario, Cavite Philippines
(2011-07 - 2013-09)
- Checking of all machines in my assigned area.
- Checking and Reading of Endorsement logbook for trouble encountered in the duty time of my replacement.
- When machine having a trouble, immediately repair it to avoid long downtime of machine.
- Review preventive machines priority schedule in our preventive machine monitoring board.
- Prepare all tools, parts, motors, oil and lubricants, bearing, belt and cleaning tools needed in preventive of machine.
- Conduct preventive of machine – Cleaning of all parts of machine (inside-out), putting of oils, grease, lubricants. Replace of bearing, belt motor if need to replace and cleaning of sensor.
- Calibrating of machine
- Conduct testing of machine before turn over to production leader.
- When machine is in good condition, I assist production to make wooden crates, wooden pallet, cabinet that production needed.
Production Operator - House Technology Industries Pte., Ltd. - Block 25C&D, Phase IV, Expansion Area, Philippine Economic Zone Authority Rosario, Cavite, Philippines
(2008-06 - 2011-07)
- To maintain the good quality of products and on time delivery for customer satisfaction.
- Review of bar chart priority schedule.
- Prepare of tools, different types of nail tucker, different sizes of nails, handsaw, jigsaw, plainer, hammer, claw bar, meter tape, air driver used in ceiling parts assembly.
- Assemble different sizes of ceiling parts of the house.
- Assemble of ceiling panel using 38mm thickness, 200mm width of wood and the length of the woods depend on the plan of panel with 15mm thickness of plywood with different sizes of length and width depends on the plan of panel.
- Assemble of ceiling parts of house using nail tucker with nail length size 90mm, 75mm and 50mm.
- Assemble of roof parts of house with 38mm thickness 90mm width and the different sizes of length of wood base on plan of panel.
- Assemble roof parts of house using nail tucker with length size of nail 90mm, 75mm and 50mm.
- Assemble roof car port with wood side 38 mm thicknesses -150mm width and different sizes of length of wood base on the panel plan with nail size 90mm.
- Can operate panel saw machine
- Can operate planer machine
- Can operate and handle the different kinds of wood working tools and power tools, such as: Miter saw, Jig saw, Nail Tucker, Router, Air Driver and Hole saw.
- When I have free time, I make wood cabinet, wooden pallet, wooden rack, tables anything that production needed.
- Can operate lathe machine
Production Associate - KEIHIN PHILIPPINES CORPORATION - 105 Trade Avenue, Phase IV Laguna Technopark, Brgy. Loma, Biñan, Laguna 4024, Philippines
(2007-11 - 2008-04)
- To maintain the good quality of products
- Checking actual and filled up preventive check sheet of machine.
- Checking of oil level, coolant level, grease and lubricants before using of machine.
- Conduct Dry run of machine
- When Dry run is done, put raw materials (intake manifold parts Honda cars engine) inside the numerical control router machine, and then operate of machine.
- When process is done, check the materials before passing to the next process.
- When I have free time, I assist in packing area to pack finish good product
Printing Machine Operator - Eurotiles Industrial Corporation - Brgy Biga Silang Cavite, Philippines
(2004-02 - 2004-07)
- To maintain the good quality of printing design of every tiles product.
- Operate printing machine for the design of wall and floor tiles.
- Make sure that everything goes through my machine process has clear design and no damage before passing on to the next process.
- Packing the different sizes of floor and wall tiles finish product
Housekeeping / Maintenance Personnel - Olive Maintenance Services, Inc. (Assigned at Cypress Manufacturing Limited (Phil. Branch)) - Bangkal Makati City
(2001-02 - 2003-03)
- To maintain cleanliness of offices, production area, hallways, walls, comfort rooms and perimeter areas.
- Repair of any broken parts of comport rooms such as: Damage cubicle, leak water from damage faucet and lavatory sink.
- Replace damage bowls and urinals. Remove clogging of bows and urinal.
- Replace busted light in production area hallway, office and comfort rooms.
- Repair basic electrical problems
Machine Operator - Value Jobplacement Corp. - Dasmariñas Cavite
(2000-08 - 2000-12)
- To maintain the good quality of products
- Checking actual and filled up preventive check sheet of machine.
- Checking of oil level, coolant level, grease and lubricants before using of machine.
- Conduct Dry run of machine.
- Operate Machine
- When I have free time, I assist in packing area to pack finish good product.
