Senior Piping Designer / Design/Drafting Checker / As-built specialist - Redline Technical Inc. (Multiple clients) - Remote work (part time)
(2026-01)
- Conversion of CNRL Horizon Plant from PDS to Smart Plant 3D (equipment & piping), modeling as required to reflect Isometric drawings & equipment information.
- Checking and doing as-building activities for different clients making sure drawings & documents are up to date with plant conditions.
Senior Piping Designer / Design/Drafting checker, (Smart Plant 3D / PDS designer) - CNRL (Canadian Natural Resources Limited) - Calgary Alberta
(2014-04 - 2025-12)
Responsible for leading, managing & checking Piping/Mechanical As-building activities for the Horizon plant after the completion/installation of Sustaining Capital projects, maintenance work order or Major projects completed by various EPC companies. By sending it to our low-cost center (offshore) to process and then issue as-built drawings, (isometrics, Ga's, Vendor drawings, etc.) reflecting field conditions of the plant to Document control.
- Responsible for analyzing field markups, Turnover packages/Construction Work Package, RFI, field verification, laser scans and incorporate changes in as-built drawings, making sure it conforms with CNRL standards.
- Responsible & manage the updates of the 3D model of the plant to reflect as-built conditions.
- Extracted isometric drawings after and every model update of Horizon plant.
- Supporting the Operations engineering group in piping design (IFC) for sustaining capital / major projects & during Turn around/maintenance activities.
- Perform site visits whenever necessary for various work orders coming from operations engineering.
- Lead, manage & check the model conversion from PDS SIO to native S3D, checking the model & extracted isometrics from our low-cost center. All areas of Horizon plant, Mainly the DDA2, DDA3 (Dedicated Disposable Area) as well as the NRUTT major project.
- Really good in trouble shooting SP3D, PDS related issues encountered during isometric extraction.
- Answering inquiries from Document control in piping/mechanical related issues.
- Answering inquiries from OPS engineering, RFI, Model update or any piping related concern.
- Involved in implementation of Bolted joint tags in all U2 plants for all flanged connections.
- Manage the TML (Thickness Measurement Location) modeling for horizon plant that were identified by asset integrity group.
PDS Piping Designer - WORLEYPARSONS - Calgary Alberta
(2012-01 - 2014-03)
Joslyn North Mine Project, Fort McMurray, Alberta
- I am responsible for the design of piping layout and equipment modeling in the FSU (Froth Settling Unit) area as well as the VRU (Vapor Recovery Unit) area, during this FEED phase of the project.
- Created various drawings of detailed cuts of equipment, section and details in my area.
- I am also involved in designing the layout of various areas in Froth treatment plant during the initial stage of the project (SRU, Froth Storage Area, Pipe rack)
- Extracted Stress Isometric for all the critical lines ranging from size 36" to 10" for stress calculations in my area.
Project Team Member - AMEC - AMEC NSS Office, Kincardine Ontario
(2010-01 - 2011-12)
Bruce Power Project
- I was involved with the Final Closeout Documents, with the responsibility of updating drawings from different disciplines (Mechanical/Piping, Electrical, Instruments & Control, Civil and BOM for Bruce Power Unit 1 and 2. The changes being made are based on the following, Engineering change, Design Change Notice and Field Change Notice.
Piping designer / Design/Drafting Checker - AMEC - AMEC Oakville Office, Dartmouth Nova Scotia
(2010-01 - 2011-12)
Tufts Cove 6 Waste Heat Recovery Project
- I was involved with the preparation and updating of isometric and plan drawing as per the field mark–ups to reflect the as-built condition of the plant using Microstation 2D & 3D.
- Responsible for checking the drawings as per the field mark-up and project standards.
Mechanical Designer/PDS Piping Designer - AMEC - Fort McMurray Alberta
(2010-01 - 2011-12)
Kearl Oil Sands Project
- Member of Central Engineering group that answers to all piping-related requests for information (RFI's) and provided solution on piping related problems during the vendor fabrication of the piping issued isometric drawings.
- Responsible for piping and equipment modeling using PDS in Boiler area.
- Extracted isometric drawings in our area, as well as other areas of the plant.
- Designed the layout of utility stations that compose of (utility air, nitrogen, utility water, steam, and condensate) in boiler area.
- Designed the layout of utility air in the water treatment area.
- Coordinate with other discipline (stress, civil, HVAC, process, instrumentation) to fast-track isometric drawings as well as in resolving different issues.
- Work hand in hand with other area leads on daily basis, in helping them improve on weekly isometric commitments.
PDS Piping Designer - SHAW ENERGY & CHEMICALS - Catlettsburg, Kentucky
(2008-02 - 2010-01)
Marathon Petroleum Company LLC, MSAT II Sulfolane Revamp Project. I was involved with the preparation, and development of the plot plan from FEED to detailed engineering phase. Responsible for the modeling of equipment such as water wash column, reformate splitter column, drums, heat exchanger, plate exchanger, vertical & horizontal pumps. Design the piping layout in the Reformate splitter area.
- Extracted isometric drawings of piping in all areas of the plant.
- Created GAs of piping perspective, section and details of the plant.
- Created piping perspective section and details of specific areas using Orthogen.
- Determined tie-in points as well as identified existing piping needed to be demolished and prepared isometric of it.
- Updates model based on latest information of vendor and P&ID as well as incorporating client comments on weekly basis.
- Updating Smart Plant Review software and responsible for sending a copy to client for their weekly comments on the model.
- Trained some colleague's on using the Smart Plant Review.
- Created various drawing such as detailed cuts of towers, exchangers, drums, and pump using Microstation.
Piping designer - HATCH LIMITED - Newfounland & Labrador Limited
(2006-03 - 2008-02)
VOISEY'S BAY NICKEL PROJECT (VALE INCO NEWFOUNLAND & LABRADOR LIMITED). I was involved with the preparation of plot plan, responsible for creating conceptual layout of piping, mechanical and general arrangement drawings of the various areas of the plant using (Plant Space) during the FEED phase of the project, as well as in the preparation of material take-off.
PDS Piping Designer - HATCH LIMITED - Sao Paulo, Brazil
(2006-03 - 2008-02)
ALUMAR REFINERY EXPANSION PROJECT. I was involved with the modeling of piping, equipment such as pressure vessels, heat exchanger, pumps and other miscellaneous task. I was also involved in creating safety envelope in all areas of the plant as well as creating special supports, and resolving pipe clashes.
- Check clashes using Bentley navigator and Smart plant review.
- Updates model based on latest information of vendor and P&ID.
- Check the model integrity, running RDB updates.
- Created cuts, section and details of pressure vessel and heat exchanger.
- Revise piping and equipment to incorporate latest vendor information.
- Back draft Isometric drawings for issuance.
- Extracted isometric drawings of piping in all areas of the plant.
- Created GAs of piping perspective, section and details of the plant.
- Created piping perspective section and details of specific areas using Orthogen.
- Determined tie-in points as well as identified existing piping needed to be demolished and prepared isometric of it.
- Updates model based on latest information of vendor and P&ID as well as incorporating client comments on weekly basis.
- Updating Smart Plant Review software and responsible for sending a copy to client for their weekly comments on the model.
- Trained some colleague's on using the Smart Plant Review.
- Created various drawing such as detailed cuts of towers, exchangers, drums, and pump using Microstation.
PDS Operator/Piping Designer - JGC PHILIPPINES - Doha Qatar
(1996-10 - 1999-11)
RAS LAFFAN PROJECT
- Inputs piping design data through Intergraph's PDS Piping Designer.
- Responsible for Equipment Modeling using PDS.
- Extract Isometric drawing using PDS ISO.
- Prepares platform & miscellaneous drawing using Microstation.
CAD OPERATOR/PIPING DESIGNER - JGC PHILIPPINES - Thailand
(1996-10 - 1999-11)
TPX PROJECT
- Drafts Piping plan drawings and isometric drawings, producing 2D and 3D drawings using AutoCAD, CAD Pipe and Intergraph (PDS)
- Drafts CAD drawings based on layouts, sketches, construction drawings and calculation sheets of Engineers in conformance with customer's requirements, project specification, standard codes in order to produce accurate and relevant basis for construction.
- Prepares material take-off based on isometric drawings and project specification data.
- Ensured project specifications and drafting standards such as symbols and components are met.
Manufacturing Technician / Production Technical Operator / Manufacturing Associate / Production Assistant - CELESTICA INTERNATIONAL
(1999-12 - 2005-02)
- Certified and expert in operating and troubleshooting more than ten different SMT machines.
- Trained more than 50 co-workers of different backgrounds on different SMT (Surface Mount Technology) machines.
- Line team leader for more than 5 years, in-charge of production, achieving daily customer commits, adhering to Celestica standards, report and corrective actions on day-to-day issues.
- Passed the Electronics and Communications Licensure Examination, 1996.
- Passed the Civil Service Illegibility Examination, 1996.
