Third Party Inspection
Send a job offer directly to this candidate
Third Party Inspector, QA/QC Specialist – Follow Vendor QCP/ITPs – Oversee compliance by Contractor to Owner's Standards & Provincial legislation and Manufacturing Codes, follow-up on NCRs, RFIs, conduct Third Party Inspection Activities as per approved – Review Vendor MRB Packages, issue Quality Surveillance Reports – Attend Quality Kick-off Meetings – Attend Various project related conference calls & Meetings - Examination, measurement, and testing of products or services to determine acceptability and record inspection data.
Third Party Inspection at Self Employed (2016-02 – Present)
Third Party Inspector, QA/QC Specialist – Follow Vendor QCP/ITPs – Oversee compliance by Contractor to Owner's Standards & Provincial legislation and Manufacturing Codes, follow-up on NCRs, RFIs, conduct Third Party Inspection Activities as per approved – Review Vendor MRB Packages, issue Quality Surveillance Reports – Attend Quality Kick-off Meetings – Attend Various project related conference calls & Meetings - Examination, measurement, and testing of products or services to determine acceptability and record inspection data.
Contract Procurement QA/QC Lead at Husky Energy Inc. (2014-05 – 2016-02)
Review Contractor QCP/ITPs – Oversee compliance by Contractor to Owner's Standards &
• Provincial legislation - Review &
• Approve Vendor QMP, Manufacturing Procedures, Inspection &
• Test Plans - Manage NCRs, RFIs – Review Purchase Orders for Code &
• Specification Compliance – Manage Third Party Inspection Activities – Approve TPI Inspection Budget and Invoices – Review &
• Approve Vendor MRB Packages – Review Quality Surveillance Reports – Attend Quality Kick-off Meetings – Attend Various project related conference calls &
• Meetings - Examination, measurement, and testing of products or services to determine acceptability and record inspection data.
Contract QA/QC Lead Piping Inspector at Krupp Canada (2013-02 – 2014-05)
Syncrude MLMR Project - Review Contractor QCP/ITPs– Oversee compliance by Contractor to Owner's Standards & Provincial legislation - Review Welding Procedures & PQRs – Conduct Pre-Hydro Walk-downs - Supervise Contractor off-module Piping Prefabrication of spool construction to SCL Specs & ASME B31.3 Codes – Conduct Pre-Hydro Walk-downs and witness Hydro-Testing – Manage Punch Items – Verify Spool Dimensions, Material, & NDE Percentages by Line Class - Review NDE Reports
SQS QA Lead at Encana (2012-02 – 2013-02)
Cabin Gas Plant - Responsible for all purchase order inspection and coordination – Supervise supplier PO obligations – Monitor quality of fabrication services and documentation – Plan, assign, resource, schedule and monitor inspection of equipment and procured material to criteria established by criticality ratings - Work with engineering and expediting to approve supplier project specific QC program – Conduct Supplier surveillance (QA/QC)
Contract QA/QC Inspector at Syncrude Canada Ltd. (2008-09 – 2012-02)
• MIES - Review Contractor QCP/ITPs– Oversee Compliance by Contractor to Owner's Standards &
• Provincial legislation Review Welding Procedures &
• PQRs – Conduct Pre-Hydro Walk-downs - Supervise Contractor off-module Piping Prefabrication of spool construction to ASME B31.1/B31.3 Codes – Conduct Pre-Hydro Walk-downs and Hydro-Testing Meetings – Manage Punch Items – verify dimensions, material, &
• NDE by Line Class - Review NDE Reports - Review RT Films – Review Turn Over Books & release spool for shipment to site-conduct visual and NDT inspection of in-plant repair & maintenance work.
QA/QC Inspector/Sr.Welding Engineer/Project Engineer at T. D Williamson Canada ULC (2007-08 – 2008-09)
Manage ABSA certified welding facility - write In-Service Welding Procedures - direct and coordinate project specific activities to API, Z662 & ASME Codes - liaison with customers and provide technical information – supervise & provide in-service welding guidelines for Hot Tapping® - conduct line specific burn-through analysis – welder testing – coordinate NDE
QA/QC Welding Inspector at TIC Canada (2007-03 – 2007-08)
Syncrude Canada Ltd., SERP Project - Review Contractor QCP/ITP – Oversee Compliance by Contractor to Owner's Standards & Provincial legislation - Review Welding Procedures & PQRs - Supervise Contractor off-module piping prefabrication of spool construction to ASME B31.1/B31.3 Codes - verify dimensions, material, & NDE by Line Class - Review NDE Reports - Review RT Films – Review Turn Over Books & release spool shipments to site.
QA/QC Welding Inspector – Piping at Technip S.p.A Italy (2006-03 – 2007-08)
CNRL Horizon Oil Sands Project - PCL Fabrication Shop, Nisku, AB – Review Contractor QCP/ITP – Oversee Compliance by Contractor to Owner's Standards & Provincial legislation - Review Welding Procedures & PQRs - Supervise Contractor off-module piping prefabrication of spool construction to ASME B31.1/B31.3 Codes - verify dimensions, material, & NDE by Line Class - Review NDE Reports – Review RT Films – Review Turn Over Books & release spool shipments to site.
Turnover Coordinator at Bantrel Constructors (2005-06 – 2006-03)
Desulfurization Project – Piping & Mechanical - Coordinate Piping System Turn Over to RFO – Prepare System Turn Over Binders – Receive Quality Documentation – Coordinate vendor QC Documentation – Coordinate Construction Completion with Field Engineering and Quality Personnel – liaison with client representatives concerning quality issues- Coordinate transfer of care and control on mechanical completion of a system
QA Inspector at KBR (2004-06 – 2005-06)
UE-1, Piping & Mechanical - Witness Contractor activity, audit contractor documentation for accuracy and timeliness, sign-off ITP hold point, write surveillance reports, identify opportunities for improvement, review turnover documentation, system walk-downs, vessel closures, hydro-testing.
QC Inspector – Module Assembly Yard at Flint Energy
Absorb quality requirements from the job specification, P&IDs, piping drawings, isometrics and from other team members - Inspect piping to ASME B31.1/B31.3 Codes during fabrication and installation – prepare pressure test packages & run hydro-pressure tests
QC Inspector – Module Assembly Yard at TIC Canada (2003-11 – 2004-06)
Inspection of structural steel pipe racks and piping to ASME B31.3 and CSA W47.1 Codes, dimensional check and detailing, weld mapping
B - Pressure Welder at Boilermakers Local 146 (2000 – 2003)
With PCL, KBR, Lockerbie & Hole & Jacobs at UE-1 Project doing fitting and welding
Welding Supervisor/Inspector at Waiward Steel Fabricators Ltd.
W47.1 Structural Steel Fabrication – quality control inspection of welded structures to W59 Code, manpower allocation, scheduling production of structural steel for oil sands plants
Welding Supervisor/Quality Inspector at Lafarge Canada Ltd.
W47.1 Structural Steel Fabrication – supervision/inspection of welded structures to W59 Code
Welding Teacher at Ft. McMurray Composite High School (1998-09 – 2000-06)
Alberta Welding Apprenticeship Program to High School Students going into Welding Trades
Mathematics Teacher at Alberta College (1991-09 – 1998-06)
Mathematics, Physics Teacher at St. Jerome High School (1989-09 – 1990-06)
Mathematics, Physics Teacher at Harry Collinge High School (1986-09 – 1989-06)
Journeyman Welder at Norseman Shelters Ltd. (1979-09 – 1983-08)
SMAW, FCAW, GMAW of skid packages and shelters to W47.1 Codes
Mazagon Docks (1974 – 1979)
Bachelor of Education in Vocational - Welding Major, Mathematics Minor – University of Alberta (1983-08 – 1986-01)
Diploma in Mechanical Engineering – Bombay (1972)
Non-Destructive Testing – MT, RT, LT, UT – N.A.I.T.
Process Pipe Drafting I/II – N.A.I.T.
AutoCad v.14 Drafting – Alberta College of Drafting
