Suresh Babu J

Hello All,

Creative LabVIEW Engineer.

 7+ years of professional experience in the development of custom instrumentation, Test Fixtures,

Automated test systems (ATE) and Software Testing Methodologies.

 Proficient in Hardware in Loop validation. NI – Based HILs, CAN.

 Good knowledge of protocols like RS232, RS485, Modbus, and CAN.

 Experienced in creating test environments to run automated tests and verify on HIL.

 Experience with operation and usage of Vector CAN, NI cDAQ, NI DAQ PCI,

PXI, Lab-Jack, ICP Con, Relay, Oscilloscopes, DMM, Power Supply, Sensors, and Pneumatic Systems.

 Proficient in preparation of test plans, Test Procedures, requirement-based testing, and maintaining test results.

 Good team player, quick learner, proficient in mentoring individuals to maximize productivity with excellent communication, and strong analytical skills.

I am looking forward to hearing back from you.

Thanks and Regards

Suresh Babu J

ABOUT ME

Overall, 7+ years of experience as a LabVIEW developer, developing custom instrumentation, Automated test systems (ATE) Development and Software Testing Methodologies engineering, and 2 years of experience as an Inprocess quality controller.

PROFESSIONAL SKILLS

❖ Knowledge of Hardware like

Electrical Lab Testing (Oscilloscopes, DMM, Power Supply) / Pneumatic Systems / NI cDAQ / Sensors / NI DAQ PCI

PXI / Lab-Jack and ICP Con / Relay

❖ Knowledge of Communication Protocols like

CAN, GPIB, TCP/IP, RS-232, and RS-485.

❖ Knowledge of Tools like

LabVIEW / Basic knowledge of NI TestStand

❖ Knowledge of MS Office

Microsoft Word / Microsoft Excel / MS Visio

❖ Knowledge of Database

SQL (MySQL)

❖ Knowledge of PCBA

Soldering and replacement of electronic components. / IPC610 / ISRO PAX 300

CERTIFICATIONS

❖ Certified LabVIEW Associate Developer. Validity (July 2020 to July 2022)

❖ Knowledge of Database. SQL Fundamental Certification-1060-19023154 by Solo Learn.

WORK EXPERIENCE

Schneider Electric Pvt Ltd through TEKsystems Pvt Ltd [13/05/2019 – Current]

City: Bangalore, India

Role:- Automation Engineer

Projects handled at Schneider Electric Pvt Ltd:

● BCPME and HDPM Accuracy Testing Tool.

BCPME and HDPM Accuracy Testing Tool are developed to test and validate the Energy measuring accuracy of

BCPME and HDPM meter along with CTs. There is one bench implemented with this application. An application developed in NI LabVIEW 2020.

Hardware Used

MTE 400.3 Power source & Reference, CT, BCPME Meter, and HDPM Meter

● CT Accuracy Testing Tool.

CT Accuracy Testing Tool is developed to test and validate the class1 accuracy for Veris CT or Falco CT (Range 50,

100, 200, 400, 600, 1200, 1400, 1600) along with E50 series Meter. There is one bench implemented with this application. An application developed in NI LabVIEW 2015.

Hardware Used

MTE 400.3 Power source & Reference, Veris CT or Falco CT and E50 Series Meter

● RCM and AI Calibration and Verification Testing Tool.

RCM Calibration and Verification Testing Tool are developed to Calibrate and validate the PM5K series RCM meters.

There is one bench implemented with this application. An application developed in NI LabVIEW 2015.

Hardware Used

Rotek Power source, Toroid, RCM Module, PM2230àPower source, Tektronix DMM 4050, AI Module

Responsibilities

Project Management, Requirement analysis, Assembly, Software Development, Verification of Wiring,

System Testing & Validation.

Renault and Nissan Technologies Business Centre Pvt Ltd [12/06/2017 – 05/12/2018]

City: Chennai, India

Role:- Engineer

Projects handled in Renault and Nissan Technologies:

● Infotainment Test Bench.

The System was developed to Test the Infotainment System in the Agile Methodology process. Infotainment is kept in a Black Box. Here HMI, Functional and Nonfunctional Test cases have been tested and reports are generated in

HTML format. There are 26 benches are implemented with the same application. An application developed in NI

Test Stand 2015 and LabVIEW 2015.

Hardware Used

PXIe -1084, NI 8880, NI 6358, NI 4464, NI 6509, NI 4463, NI 2514, NI 2510, NI 2522, NI 2727, NI 8512, CAN

• VN1630, AST 1000 RF generator and Delta PPS.

Responsibilities

Project Management, Requirement analysis, Hardware Selection, Assembly, Software Development,

Verification of wiring schematic, Verification of Wiring, System Testing & Validation, and Supplier coordination

MaxEye Technologies Pvt Ltd [02/12/2015 – 09/05/2017]

City: Bangalore, India

Role:- Software Engineer

Projects handled in MaxEye Technologies Pvt Ltd:

● AVN Infotainment tester.

This test equipment is used to test the functionality of Hyundai Mobis Infotainment systems (Audio).

Test parameters list:1.AM/FM/RDS, 2.CD/DVD, 3.AUX/USB/iPod, 4. Bluetooth, 5. DAB/DRM, 6.GPS, 7. System

Version Check. There are 16 benches are implemented with the same application. An application developed in NI

LabVIEW 2014.

Hardware Used

NI 6514, NI6321, NI6211, NI4462, NI PCIe GPIB, Agilent DMM, FM/AM/RDS generator, DAB/DRM player,

GNSS Simulator, Bluetooth Module ON-Tech, and TDK Lambda PPS.

Responsibilities

Requirement analysis, Architecture Design, Hardware Selection, Assembly, Software Development,

Verification of wiring schematic, Verification of Wiring, System Testing & Validation, and Supplier coordination

Micrologic Integrated System Pvt Ltd [01/04/2014 – 14/11/2015]

City: Bangalore, India

Role:- Software Engineer

Projects handled in Micrologic Integrated System Pvt Ltd:

● TVS Speed Assembly Line.

In TVS Speed Line Consist of 13 assembly station, I have worked in 7 stations listed below

• Dial assembly and pointer fixing
• Magnet Cover pressing
• Speedo Calibration
• Back Cover Assembly
• Visor Assembly
• ODO Reversing and Packing Station
• Rework Station

Above mentioned stations are used to assemble the Two-Wheeler clusters in 13 sec. An application developed in NI LabVIEW 2011.

Hardware Used

ICP Con and NI 6514 are used for reading Digital I/O. For analog I/O NI 6009. TDK Lambda PPS.

● ABB MCB Calibration and verification Line:

In ABB MCB Calibration and verification Line consists of 4 stations. I have worked in 2 stations listed below

• Hi-Pot tester
• Conveyor control station.

The Hi-Pot tester is used to verify the MCB tripping capability by applying a high voltage (3.5KV).

The conveyor control station is used to control the IN and OUT Component transport, generating and printing the barcode.

An application developed in NI LabVIEW 2011.

Hardware Used

NI C-DAQ 9184 - 4 slot chassis with NI 9476 Output, NI 9425 Input, and ICP Con are used for analog I/O. Hi-

Pot tester and Delta PPS

● Effort tester:

An Effort tester consists of one station. This is used to measure the 4-wheeler A/C Air-vent knob moment load.

An application developed in NI LabVIEW 2011.

I/O Modules Used

NI 6514 is used for reading Digital I/O and NI 6009 is used to read analog Inputs.

● YBA Assembly Line.

In YBA Assembly Line Consist of 9 assembly station, I have worked in 3 stations listed below

• Light Box Assembly
• Closer Assembly
• Rework Station

Above mentioned stations are used to assemble the Four-Wheeler clusters in 120 sec. An application developed in NI LabVIEW 2011.

I/O Modules Used

NI 6514 and NI 6518 are used for reading Digital I/O. TDK Lambda PPS

Responsibilities

Requirement analysis, Software Development, System Testing & Validation

Indus Teqsite Pvt Ltd [03/10/2011 – 19/10/2013]

City: Chennai, India

Role;- IPQC

Responsibilities: -

In-process Quality Controller

Reliance Info Tech [06/11/2006 – 04/03/2011]

City: Dharmapuri, India

Role:- Customer Care Executive

ORGANISATIONAL SKILLS

Responsibilities & Project Management:

● The Requirement analysis.

● Test Plans preparation

● GUI design, Coding, Execution, Analysis, and reports generation and Software Black box testing.

● Engaged in ATE design, Wiring design, and Fixture design.

● Hardware selection.

● BOM Preparation.

● Spare part planning, and inventory management.

● Preparing poka-yoke in new projects.

● Validation of new systems in all aspects of the product and systems like function, system, and performance.

● Preparing lessons learned and best practice documents from the previous issue experience

S.S.L.C

Directorate of Government Examinations (DGE), Tamil Nadu [09/06/2002 – 30/05/2003]

Address: Govt. Hr. Sec. School Lakkiyampatti, Dharmapuri, India, 636705 Dharmapuri (India)

Diploma in Electronics and Communication Engineering

IRT Polytechnic College [11/07/2003 – 30/04/2006]

Address: Bargur, Orappam(PO), Elathagiri(Via), Krishnagiri(Dt), Tamilnadu, 635108 Krishnagiri (India)