Charchris Brettle
Metal Polisher, Section Bender
Hire this person
Send a job offer directly to this candidate
About
I am an enthusiastic and dedicated person, I am also hard working, I have experience in engineering and Manufacturing. I have good practical hands on skills and I like to keep busy all the time. I enjoy physical work and jobs that involve moving about.
Experience
Metal Polisher at Brookeson Material Handling (2025-04-28 – 2026-02-13)
- I grind and sand stainless parts of bulk containers.
- I polish with abrasive wheel and sanding disks.
- I also use linishing belts.
- I use lathe polishing machines as well.
- As well as polishing I clean welds with a Tig brush.
Metal Polisher/Section Bender at Widney Manufacturing (2020-09-28 – 2025-04-28)
- I polish aluminium frames by sanding them down with a sand block.
- The frames I sand down are for Caterpillar.
- I linish 50 frames a day and I use sand paper to get rid of dents.
- I also do some grinding.
- As well as linishing I do section bending.
CNC Setter/Operator at Accles and Pollock (2018-03-05 – 2020-02-04)
- I worked on Mazatrol lathes and Mills.
- I made parts for jet engines on Rolls Royce Aerospace e.g flanges and flaps.
- Besides operating I did changeovers, changing tools and selecting programs e.g clicking work N/O.
- I used cmm, verniers and micrometres to measure parts.
- I machined a exotic metal such as inconel.
- I deburr parts after they been machined.
CNC Operator at Accles and Pollock (2017-01-03 – 2018-03-02)
CNC Operator at Alucast Ltd (2017-01 – 2018-03)
- I worked on a mixture of Lathes, VMC and mills, the machines I worked on were Haas and Siemens.
- I machined small and medium size parts for Aston and Lotus.
- I machined aluminium and I ran two machines at the same time.
- I used plug gauge to measure and I deburred parts.
- At the end of the shift I cleared the swarf from the machine.
CNC Machinist at Caparo (2015-02 – 2015-10)
- I have worked at Caparo as a CNC Machinist and I machined gas pipes.
- I used verniers, micrometres and gauges to measure the parts and I also use CMM.
- I mainly do turning and the machines I work on are the lathes.
- I have made threads in the nuts and machined both sides of the segment front, back and inside.
Agency at Rectifier
- I removed rusts from a metal tube using wire brush, sand paper and scourer.
Various CNC Positions at Agency Work (2015 – 2017)
Between 2015 and 2017 I have been working at different places and doing different jobs mostly CNC.
Education
NVQ Level 2 in Preparation for working in the Engineering and Manufacturing Industry – Birmingham Metropolitan College
Introduction to Numerical Control Machine – Dudley College (2014)
City & Guilds Level 2 in Electrical Installations (Buildings and Structures) – Dudley College (2013)
City & Guilds Level 2 in ICT System and Principles – Dudley College (2013)
NCFE Level 1 in Employability training (2012)
Level 1 in Computerized Accounts – Stourbridge College (2011)
Business Studies – Stourbridge College (2011)
Level 1 in Employability Skills – Stourbridge College (2011)
Level 1 in Numeracy – Stourbridge College (2010)
Level 1 in Literacy – Stourbridge College (2010)
EDXCEL in Introduction to Business Administration and Retail – Stourbridge College (2010)
CNC Introduction to Part Programming – Dudley College
BTEC in Business – Stourbridge College (2008-09)
