HEALTH, SAFETY AND ENVIRONMENT(HSE) SUPERVISOR – SUCTION PILE GRILLAGE FABRICATION - AUKA ENGINEERING LIMITED - Takoradi
(2025-11 - 2025-12)
- Enforced all applicable IOGP rules to always facilitate a safe working environment and ensured Personal Protective Equipment (PPE) compliance
- Conducted a thorough risk assessment for the fabrication, welding and transportation of the grillage which reduced workplace incidents significantly by 37%
- Prepared all project specific HSE documentation required for workers and all work activities on site
- Performed routine training and awareness for workers, contractors and third parties to prevent incidents by 45% and promote a positive safety culture
- Undertook routine compliance monitoring activities such as weekly walkthrough to enforce compliance with environmental and health and safety standards
- Performed various emergency preparedness activities such as spill drills, RT drills, emergency evacuation drills to test the readiness of the workforce towards unforeseen emergencies
- Developed and enforced a system for behaviour-based safety, such as the use of observation cards to report all types of incidents thereby reducing recordable injuries by 30%
- Conducted routine Toolbox and pre-job meetings, as well as the issues of work permits for all high-risk work activities
- Monitored and constantly supervised Quality KPIs to maintain 95% accident and equipment breakdown prevention rate
- Conducted investigations of all reported incidents and recorded them according. Follow up lessons learnt was conducted to educate workers and to prevent reoccurrence
HEALTH, SAFETY AND ENVIRONMENT(HSE) MANAGER - ROCKWAY OILFIELDS SERVICES GHANA LTD - Accra
(2025-10 - 2025-10)
- Developed managed all project related to HSE documentation
- Safely Managed all project activities (Long range Ultrasonic testing on pipes, tank dives and pipes under culverts (TEMA OIL REFINERY)
- Achieved 100% participation rate in daily and weekly toolbox talks
- Coordinated all field activities to ensure health and safety compliance
- Conducted pre-task safety briefings to workers, emphasizing specific hazards and emergency response procedures
- Thorough supervision and management of all contractors working with my team aboard the vessel
- Conducted detailed inspection of all work area to identify potential hazards, particularly, slips, trips and fall protection and prevention
- Ensured that any incidents, near-misses, or accidents during work activities are immediately reported, investigated, and corrective actions are implemented to prevent recurrence
HEALTH, SAFETY AND ENVIRONMENT(HSE) SUPERVISOR – SEAFAST (ISLAND FRONTEIR VESSEL) - AUKA ENGINEERING LIMITED - Takoradi
(2025-03 - 2025-03)
- Conducted a thorough risk assessment (JSA) for ROV mobilization activities on the vessel, identifying potential hazards with work at heights, confined space/restricted area works, fire risks, and equipment failures to identify and implement appropriate control measures
- Coordinated with client representatives on all required work permits before, during and after work activities
- Development of the company's entire HSE management system based on ISO 45001
- Overseeing safe entry and exit protocols for workers entering confined spaces within the vessel during all work activities
- Ensured that air quality was regularly monitored and appropriate rescue measures in place
- Safe supervision and coordination of all simultaneous operations (SIMOP) on deck
- Ensured fire watch personnel are in place and that fire suppression equipment, such as extinguishers and hoses, was available and operational throughout the welding activities
- Conducted pre-task safety briefings to workers, emphasizing specific vessel related hazards and emergency response procedures
- Thorough supervision and management of all contractors and subcontractors working with my team aboard the vessel
- Ensured that any incidents, near-misses, or accidents during work activities are immediately reported, investigated, and corrective actions are implemented to prevent recurrence
- Organised Safety standdowns to discuss any incidents and changes relevant to work activities and share lessons
- Identified HSE needs and organised routine training for all workings
- Provided training and awareness on machine guarding, its hazard and importance
- Participated in external pre-qualification audits for a tender for fabrication activities
- Supervised hot work activities, ensuring that all welding, grinding and cutting activities adhere to safety standards
HEALTH, SAFETY AND ENVIRONMENT(HSE) SUPERVISOR – SUBSEA JUMPER FABRICATION - ORSAM ENERGIES - Takoradi
(2024-11 - 2024-12)
- Conducted a thorough risk assessment for the welding demobilization activities on the vessel, identifying potential hazards related to work activities such as Routine lifting activities, special lifting activities, hot works, work at height, etc, to identify and implement appropriate control measures. Through this, I achieved a 50% reduction in recordable incidents
- Prepared the necessary documentation required for workers and all work activities on site
- Performed routine training and awareness, enforced behavioural-based safety for workers, contractors and third parties attain a 40% reduction in incidents and promote a positive safety culture
- Undertook routine compliance monitoring activities such as weekly walkthrough to enforce compliance with environmental and health and safety standards reducing noncompliance related incidents by 20%
- Performed various emergency preparedness activities such as spill drills, RT drills, emergency evacuation drills to test the readiness of the workforce towards unforeseen emergencies
- Conducted routine Toolbox and pre-job meetings, as well as the issues of work permits for all high-risk work activities
- Achieved over 90 LTI free man-hours without any recordable incident
HEALTH, SAFETY AND ENVIRONMENT(HSE) - SEAFAST (BOURBON EVOLUTION VESSEL and GO SUPPORTER VESSEL) - AUKA ENGINEERING LIMITED - Takoradi
(2024-07 - 2024-09)
- Conducted a thorough risk assessment for the welding demobilization activities on the vessel, identifying potential hazards such as confined space, fire risks, and equipment failures to identify and implement appropriate control measures
- Development of the company's entire HSE management system based on ISO 45001
- Oversaw safe entry and exit protocols for workers entering confined spaces within the vessel during demobilization
- Ensured that air quality was regularly monitored and appropriate rescue measures in place
- Ensured fire watch personnel are in place and that fire suppression equipment, such as extinguishers and hoses, is available and operational throughout the welding demobilization process
- Conducted pre-task safety briefings to workers, emphasizing specific vessel-related hazards and emergency response procedures
- Ensured that any incidents, near-misses, or accidents during work activities are immediately reported, investigated, and corrective actions are implemented to prevent recurrence
- Conducted internal audits to ascertain the effectiveness of the company's management system
- Participated in external pre-qualification audits for a tender for fabrication activities
- Supervised hot work activities, ensuring that all welding, grinding and cutting activities adhere to safety standards, especially regarding fire safety and safe systems of work
HEALTH, SAFETY AND ENVIRONMENT SUPERVISOR - GEM CONSULT - Takoradi, Ghana
(2024-07 - 2024-07)
- Evaluated and assessed excavated sites to identify potential hazards and recommend preventive measures to ensure the safety of all workers and the public
- Conducted regular inspections to ensure compliance with safety regulations, environmental standards, and internal company policies
- Oversaw environmental health and safety aspects of the road construction and excavation, including managing noise, dust, and hazardous material exposure
- Organized and delivered training sessions for employees on proper safety procedures, use of personal protective equipment (PPE), and emergency response
- Worked closely with client and contractor project managers, engineers, and supervisors to integrate all construction safety measures into construction planning and execution
HEALTH, SAFETY AND ENVIRONMENT(HSE) SUPERVISOR AND SITE HSE REPRESENTATIVE (HARLEQUIN OIL AND GAS) - ORSAM OIL AND GAS LIMITED - BEAHU, Ghana
(2022-09 - 2023-03)
- Reviewed the effectiveness of health and safety measures on the project site
- Enforced compliance with OHCS management system including weekly EHS walkthrough to verify compliance, risk management and opportunities for improvement
- Developed and implemented risk assessments for various Task including hot bending, cold bending, upending of subsea structures amongst many others
- Consulted with other client representatives and contractor during project site audits, inspections and meetings
- Identified potential hazards and reviewing of incident investigation reports related to the project
- Reviewed of all project related documentation, ensuring its implementation as well as its effectiveness on the project
- Participated in regular planned client leadership walkthrough to identify health and safety improvement opportunities on the project site
- Assisted in the safe transportation of all completed assembled structures (mudmat) to shore base and client's base
- Conducted planned assurance audits and verification on all applicable IOGP lifesaving rules
HEALTH, SAFETY AND ENVIRONMENT(HSE) OFFICER - ORSAM OIL AND GAS LIMITED - BEAHU, Ghana
(2022-05 - 2023-03)
- Supervised work activities such as welding, bevelling, grinding, tacking, scaffolding, hydrotest, special lifting operations, blasting to ensure the best outcome without comprising the health and safety of workers and other interested parties
- Monthly inspections of safety critical devices, compressed gas inspections, breathing equipment amongst others
- Supervision of RT, UT amongst other inspections by third parties' company's such as Apave and Burea Veritas
- Conducted of inductions and site orientation for new employees, subcontractors and visitors
- Supervised of daily vigiminute (toolbox talks)
- Promoted good safety practices and enforce safety guidelines
- Carried out review and monitoring of Permit to work system
- Inspection of work premises and work of personnel to identify issues of nonconformity in other to implement the appropriate corrective action
- Prepared reports on occurrences and incidents and providing information and feedback to top management
- Developed measures to ensure personal safety and correcting unsafe acts and conditions
- Coordinated of permit to work system for high-risk activities such as confined space, work at height, lock out- tag out, hydrotest, NDT, RT, MPI testing amongst others
- Reviewed the effectiveness of health and safety measures on the project site
- Enforced compliance with OHCS management system including weekly EHS walkthrough to verify compliance, risk management and opportunities for improvement
- Developed and implemented risk assessments for various Task including hot bending, cold bending, upending of subsea structures amongst many others
- Consulted with other client representatives and contractor during project site audits, inspections and meetings
- Identified potential hazards and reviewing of incident investigation reports related to the project
- Ensured the appropriate material safety data sheet was in place for all work activities
- Ensured all the proper tags, signages and barriers were all visible and relevant at all times
- Reviewed of all project related documentation, ensuring its implementation as well as its effectiveness on the project
- Participated in regular planned client leadership walkthrough to identify health and safety improvement opportunities on the project site
HSE AND TRANSPORT OFFICER - BAYFIELD OIL SERVICES LIMITED - NEW AMANFUL, Ghana
(2019-11 - 2022-04)
- Assisted in the cost-effective development, implementation and maintenance of three ISO Standards; 45OO1, 14001 and 9001
- Provided HSE-related services to the other companies within the PY-Links group
- Management of the health and safety of the operational yard by acting in the capacity of a team lead and delegating responsibilities across all levels of the organization to ensure that all work activities are carried out safely
- Formulated, establish and implement HSE policies and procedures including permit to work systems, Risk Assessments and Safe Systems of work (SOPs)
- Monitoring Occupational Health and Safety Standards and Compliance with OHS policy and procedures
- Developed and implemented a safe driving policy, established monitoring and rewards systems to deter ignorant drivers and to reward safe behaviour
- Assisted group departmental managers in establishment and implementation of HSE targets and objectives
- In consultation with group head to prepare annual HSE budgets and financial reports
- Conducted monthly HSE inspections to determine compliance to industry standards and to ascertain areas of non-compliance for corrective action implementation
- Provided training with respect to HSE to new staff, contractors and visitors
- Enforced company's compliance to statutory requirements (EPA, FOSA, PC, NFS etc.)
- Planned and organized toolbox and monthly HSE meetings, to identify health and safety concerns inherent in daily operational work
- Conducted investigations into incidents and near-misses
- Conducted frequent internal and external audits for potential suppliers, clients and other interested parties such as contractors
TEACHING AND ADMINISTRATIVE ASSISTANT - UNIVERSITY OF CAPE COAST - SCHOOL OF MEDICAL SCIENCES - CAPE COAST, Ghana
(2018-06 - 2019-08)
- Guided class discussions encouraged debate and feedback amongst students
- Assisted in Research works of lecturers and professors
- Coordinated Clinical Skills and Problem-Based Learning courses for medical students
- Ensured prompt ordering and stocking of office supplies
- Ensured the department complied with the universities policies and regulations by proper supervision and coordination of activities of employees and students within my jurisdiction
- Performed Microscopic analysis; Histopathology and Cytology analysis on preserved human tissues
- Assisted in invigilation of examinations and marking of scripts
LABORATORY TECHNICIAN (INTERN) - COUNCIL FOR SCIENTIFIC AND INDUSTRIAL RESEARCH – BIOTECHNOLOGY DIVISION - KUMASI, Ghana
(2017-06 - 2018-01)
- Used Nanodrop spectrophotometer for determination of DNA concentration and purity of plant tissues
- DNA extraction, polymerase chain reaction, band scoring, and data analysis using DARWIN
- Micropropagation and sub-culturing of plantlets
- Plant culture media preparation includes shooting, rooting, and growth media
- Initiation of plant germplasm for in-vitro micropropagation and storage
FRONT DESK ASSISTANT/INTERN - BAYFIELD OIL SERVICES - Accra
(2015-05 - 2015-09)
- Helped with other activities, Marketing and Public relations
- Performing clerical duties necessary to keep the organization running
- Assisted in overseeing HR events, meetings and coordinating management-employee communications
- Assisted in delivering invoices and bank transactions for clients
