Wireless Engineer - Huawei Technologies (PTY) LTD
(2012-08 - 2013-01)
- Site Commissioning (Installing software scripts)
- Installation of BBU, RRU, RFU, WDMA & GTMU cards
- Creating scripts using CMU templates & M2000
- Configuration & troubleshooting environmental alarms
- Give training to site supervisors
- Quality checks
- Calibrate service & make service calls around SA
- Compile and send daily report
Instrument Technician - Sasol Petroleum SA
(2013-02 - 2013-09)
- Calibrate Instruments
- Flow, Pressure, Temperature & level Measurements
- Remove and install valves from pipe line
- Remove & Install Transmitters
- Prepare for shutdown
- Rockwell PLC & Siemens equipment overview
- Maintenance
- Power tools and circuits soldering
- Basic hand tools
Millwright Assistant - Unilever SA
(2013-10 - 2018-03)
- Machine program set up and conducting fault finding
- Work with hand tools such as spanners, screw drivers, hammer, pliers, hacksaw etc.
- Work with measuring tools such as Vernier calliper, measuring tape, ruler etc.
- Interpretation of engineering drawings
- Maintenance of pumps
- Work with marking off
- Work with Pneumatic machines
- Maintenance and replacement of conveyor belts
- Application of locking devices such as shaft collars, circlips, split pins, spring pins etc.
- Maintaining and replace bearings
- Maintenance and replacement of v-belts and pulleys
- Use of power machines such as bench grinder, drill press, jig saw etc.
- Use of lifting equipment such as chain block, wire rope slings and shackles
Maintenance Technician - Euroberry
(2019-04 - 2020-04)
- Operation and maintenance of the plant
- Attend to breakdown and record jobcard
- Standby genertors tested and ready for use during power failure
- Data from monitoring system cheched and validated monthly
- Run correct compressors for load conditions
- Calibration checks on all sensors
- Replace bearing and electrical motors
- Maintenance on mobile racking
- Create maintenance schedule for all equipments in the plant
Millwright Assistant - Eskort Limited
(2020-04 - 2024-03)
- Day to Day service of the ammonia system
- Check and repair refrigeration system equipments. (Compressors, ice machine, valve stations, cold rooms & aircorn units)
- Running hours services on ammonia compressors (Screw compressors and piston)
- Check and monitor plant performance
- Do root-cause analysis and repair
- Create job cards for all maintenance and breakdowns using IMS system
- Attend to all cold rooms and chillers
- Maintenance done as per schedule
- Service ammonia valve station
