Lead Radiography Interpretation Level III - MLNG FAS Project Third Party - Bureau Veritas (Sarawak) Sdn Bhd - Sarawak
(2024-11 - 2025-05)
- To re-review and verify RT films against ISO drawing and other film to ensure any other falsified RT taken.
- To identify any potential discrepancies between RT films and ISO drawing, any skeptical finding discovered on any RT films or any similarities in terms of imperfection, weld contour, etc.
- To provide verification process and methodology of reviewing RT films detail.
- As Controls or reference for all parties during the execution of RT films verification works.
Lead NDT Coordinator - NDT Engineer, Rosmari Marjoram OGP Project (End user = Shell Sarawak) - Samsung E & A Malaysia - Malaysia
(2023-07 - 2025-02)
- To perform interpretation and analysis inspection data through Phased Array Ultrasonic Testing and also have qualification to review based on computer software or report.
- To conduct any discussion about planning and budgeting to arrange Phased Array Ultrasonic Testing Activity.
- Review all NDT procedure and will approved it
- To monitor all procedure and NDT activity based on ASME, AWS D1.1, B31.1, B31.3 or etc.
- Coordinate and review all RT film for piping with client.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Coordinate UT activity such as joint selected and witness UT activity do by UT Man.
- Coordinate MT, PT activity such as joint selected and witness all activity.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer Diameter.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
Lead NDT Coordinator - NDT Engineer, Field Expansion LNG EPC2 Qatar (End user = Qatar Gas) - Samsung C & T Corporation - Qatar
(2022-05 - 2023-06)
- To perform interpretation and analysis inspection data through Phased Array Ultrasonic Testing and also have qualification to review based on computer software or report.
- To conduct any discussion about planning and budgeting to arrange Phased Array Ultrasonic Testing Activity.
- Review all NDT procedure and will approved it
- To monitor all procedure and NDT activity based on ASME, AWS D1.1, B31.1, B31.3 or etc.
- Coordinate and review all RT film for piping with client.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Coordinate UT activity such as joint selected and witness UT activity do by UT Man.
- Coordinate MT, PT activity such as joint selected and witness all activity.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer Diameter.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
Site Inspection Engineer - NDT Engineer, Pengerang Intergrated Complex - Rapid Project (End user = IRSO Southen/Prefchem) - Pioneer Engineering Malaysia - Malaysia
(2021-11 - 2022-05)
- To perform interpretation and analysis inspection data through Phased Array Ultrasonic Testing and also have qualification to review based on computer software or report.
- To conduct any discussion about planning and budgeting to arrange Phased Array Ultrasonic Testing Activity.
- Review all NDT procedure and will approved it
- To monitor all procedure and NDT activity based on ASME, AWS D1.1 or etc.
- Coordinate UTTM activity such as joint selected and witness UTTM activity do by UT Man.
- Review all UTTTM report and submit to client and owner.
- Coordinate and review all document and procedure with client.
- Monitor reject rate and welder performance.
- Update all UTTM activities in summary.
- Documentation control related to QA & QC / Inspection.
NDT Engineer - QC Inspector (Piping), Gas Pemprosesan Santong (GPS) Alexis 7 (End user = Petronas Gas Berhad/PD&T/GPD) - Transwater API Sdn Bhd - Malaysia
(2021-01 - 2021-11)
- Monitor all RT activities as per request from sub-contractor.
- Monitor RT status and control RT backlog.
- Coordinate and review all RT film for piping with client.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer diameter.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
NDT Engineer - NDT Coordinator, Melaka 2242MW CCGT Power Plant (End user = EDRA) - Hyundai Engineering Malaysia - Malaysia
(2018-08 - 2021-01)
- Monitor all RT activities as per request from sub-contractor.
- Monitor RT status and control RT backlog.
- Coordinate and review all RT film for piping with client.
- To perform interpretation and analysis inspection data through Phased Array Ultrasonic Testing and also have qualification to review based on computer software or report.
- To conduct any discussion about planning and budgeting to arrange Phased Array Ultrasonic Testing Activity.
- Review all NDT procedure and will approved it
- To monitor all procedure and NDT activity based on ASME, AWS D1.1 or etc.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Coordinate UT activity such as joint selected and witness UT activity do by UT Man.
- Coordinate MT, PT, PMI and Hardness activity such as joint selected and witness all activity.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer Diameter.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
- To check the requirement of preheat such as the, method of preheating, the min temperature and interpass temperature and heating element and the direction of preheat if using flame type. Make sure the heating rate is uniform and not localized heating applied.
NDT Inspector - QC Inspector (Piping), Rapid Project P27 Flexi PE (End user = Petronas) - TecnimontHQC - Malaysia
(2018-01 - 2018-08)
- To perform interpretation and analysis inspection data through Phased Array Ultrasonic Testing and also have qualification to review based on computer software or report.
- To conduct any discussion about planning and budgeting to arrange Phased Array Ultrasonic Testing Activity.
- Review all NDT procedure and will approved it
- To monitor all procedure and NDT activity based on ASME, AWS D1.1 or etc.
- Monitor all RT activities as per request from sub-contractor.
- Monitor RT status and control RT backlog.
- Coordinate and review all RT film for piping with client.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Coordinate UT activity such as joint selected and witness UT activity do by UT Man.
- Coordinate MT, PT, PMI and Hardness activity such as joint selected and witness all activity.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer Diameter.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
- To check the requirement of preheat such as the, method of preheating, the min temperature and interpass temperature and heating element and the direction of preheat if using flame type. Make sure the heating rate is uniform and not localized heating applied.
NDE Coordinator - QC Inspector (Piping), Terminal RGT 2 (End user = Petronas) - Samsung C & T Corporation - Malaysia
(2017-04 - 2017-12)
- To perform interpretation and analysis inspection data through Phased Array Ultrasonic Testing and also have qualification to review based on computer software or report.
- To conduct any discussion about planning and budgeting to arrange Phased Array Ultrasonic Testing Activity.
- Review all NDT procedure and will approved it
- To monitor all procedure and NDT activity based on ASME, AWS D1.1 or etc.
- Monitor all RT activities as per request from sub-contractor.
- Monitor RT status and control RT backlog.
- Coordinate and review all RT film for piping with client.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Coordinate UT activity such as joint selected and witness UT activity do by UT Man.
- Coordinate MT, PT, PMI and Hardness activity such as joint selected and witness all activity.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer Diameter.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
- To check the requirement of preheat such as the, method of preheating, the min temperature and interpass temperature and heating element and the direction of preheat if using flame type. Make sure the heating rate is uniform and not localized heating applied.
NDT Coordinator - QC Inspector (Piping), Pengerang Cogeneration Plant (Maincon = Siemens, End user = Petronas) - Technofit Sdn. Bhd. - Malaysia
(2016-08 - 2017-04)
- To check all NDT report for request RT, MPI, PT, PAUT, UT, PMI, HARDNESS TEST AND PWHT
- Coordinate NDT meeting with client and production.
- Coordinate and review all RT film for piping with client.
- Monitor reject rate and welder performance.
- Update all NDT activities in summary.
- Monitor machine PWHT condition and color coding.
- Monitor all NDT inspections: Magnetic Particle Testing, Ultrasonic Testing and Radiography Testing.
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- Coordinate PAUT activity such as joint selected, witness calibration for Range Thickness and Outer Diameter.
- Coordinate UT activity such as joint selected and witness UT activity do by UT Man.
- Coordinate MT, PT, PMI and Hardness activity such as joint selected and witness all activity.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- Review all NDT report and submit to client and owner.
- Control all NDT backlog and coordinate joint to reduce backlog
- Documentation control related to QA & QC / Inspection.
- To check the requirement of preheat such as the, method of preheating, the min temperature and interpass temperature and heating element and the direction of preheat if using flame type. Make sure the heating rate is uniform and not localized heating applied.
QC Welding Inspector (Structure), Wheatstone Project LNG Plant Facility - 101KB and 202KB (module) (Client = Bechtel Corporation, End user = Chevron Australia P - SapuraKencana Petroleum Sdn. Bhd. - Lumut Port Industrial Park, Kampung Acheh, Mukim Lumut, Daerah Manjung, 32000 Setiawan, Perak
(2013-12 - 2016-03)
- Assist in set up preparation and coordinate the following document prior fabrication/erection such, Project Quality Plan, Inspection & Test Plan, NDT Matrix, Weld summary, quality control procedures and WPS selection.
- To review the welding documents such as approved Welding Procedure Specification, (WPS) Procedure Qualification Record (PQR) and check all information for all variables and range of approved for that procedure
- To familiarization to application codes, standard or client specifications and also the approved drawings such as
- To check the variables for welder qualification certificate and the position limits and the history of employment to avoid time laps.
- To check and monitor the joint preparation such as per requirement of WPS and also the jig and fixtures for distortion control.
- To check the condition of welding machine and the condition of welding cables, electrode holder, welder tools and ensure all connection is correct.
- To check or review all the calibration certificate for welding machine and equipment.
- To conduct Material verification inspection (MVR) such the material size, type and the condition of the material.
- To conduct fit-up inspection, Joint preparations, Root Gap, Misalignment, Straightness Squareness and Bevel Angle prior to welding.
- To check the consumables, type and condition such as concentricity of flux covering and the treatment or storage and handling of the electrode.
- To check the requirement of preheat such as the, method of preheating, the min temperature and interpass temperature and heating element and the direction of preheat if using flame type. Make sure the heating rate is uniform and not localized heating applied.
- To check the weather conditions and avoid welding during raining day and provide adequate protection during windy situation.
- To check the welding position as per WPS used and correct welder identification.
- To monitor the preheat maintenance by looking at minimum temperature as per WPS used.
- To check the welding parameters used such as current, voltage and travel speed.
- Request for dimensional check (Dimension, Straightness, Levelness, Squareaness, Verticallity) to Dimensional Controller during and after welding for dimensional control.
- To perform visual inspection observes any defects, records and defect and compare the size of the defect with specified code or standards.
- To check and select weld joint as per NDT matrix for request NDT to NDT coordinator for arrange manpower to carry out NDT activities.
Lecturer - Malaysian Institute of Non Destructive Testing, (MINDT) - No 18, Jalan Tanjung SD13/2, Bandar Sri Damansara, 52200 Kuala Lumpur
(2012-01 - 2013-12)
- Lecture about Radiographic Interpretation.
- Lecture about Welding Inspector.
- Lecture about Magnetic Testing.
- Lecture about Penetrant Testing.
- Check the radiograph for correct identification.
