
Sohaib Afridi
Senior Principal Analog Design Engineer
Hire this person
Send a job offer directly to this candidate
About
Self-motivated and hard-working Analog Design Engineer with 15 years of experience in the field of IC design, eleven years in industry and four years involved with research & teaching. Experienced in design of high resolution discrete-time ADCs and supporting analog circuits such as input & reference buffers, bandgap reference and clocked circuits. Recently, involved in RF-ADC design with significant contribution to EM and RF analysis, which developed quickly due to early career experience and interest in RF system design.
Problem solver with strong work ethics and ambitious to support my team to fulfil project goals.
Experience
Senior Principal Analog Design Engineer - Cadence Design Systems - Cork, Ireland
(2023-02)
- Project lead and design engineer for high-speed wireline D2D(UCIe) products
- Led a group of eight design engineers, spread across multiple time-zones US, India & Ireland
- Responsible for architecture/design phase study for D2D UCIe TX (Transmitter)
- Four IP's developed across multiple finfet/GAA process nodes.
Senior Analog Design Engineer - Analog Devices - Cork, Ireland
(2021-12 - 2023-01)
- Analog IC design of products in high-end consumer products.
- Analysis and design of a 12-bit asynchronous SAR ADC on 40nm process for a Capacitive-to-Digital (CDC) converter. Designed the DAC, Comparator and SAR logic.
- Involved in a successful tape-out for a multi-million USD market consumer product.
Senior Analog Design Engineer - Xilinx - Cork, Ireland
(2018-01 - 2021-11)
- Design of analog/mixed-signal circuits for RF-ADCs in 16nm/7nm finfet process nodes, including analog front-end, T/H sampling switches and DACs.
- Analysis and design of RF passive networks for input matching (inductors/T-coils). Package-device co-simulation in EMX & HFSS and debugging RF spurs found in measurement.
- High speed (>1GSps) and large bandwidth (>12GHz) design of ADC T/H sampling network including DAC, and bootstrapped sampling switches which can achieve >60dB linearity at the highest input frequency. Guiding layout engineers to achieve this performance with root-cause analysis and improvement with each layout trial.
- Involved in three successful product chip designs.
Analog Design Engineer - ROHM Powervation - Cork, Ireland
(2016-10 - 2017-12)
- Design of circuits for intelligent power management controllers in 180nm and 65nm CMOS.
- 10-bit accurate T/H amplifier for pulsed voltage sense and dynamic latched comparator with low latency. Also implemented a current starved ring oscillator VCO and analog PLL for 100MHz clock generation.
- Contributed to a successful product chip design.
Design Engineer/Research Assistant - MCCI, Tyndall National Institute - Cork, Ireland
(2014-08 - 2016-09)
- Contributed to three different projects in 350nm, 130nm and 28nm CMOS process.
- Co-design and layout of differential amplifiers and bandpass filters for biomedical application.
- 12-bit SAR ADC design and layout of Bottom-plate sampling network, CDAC & Input Buffer for power-management applications. Providing top-level chip layout support and verification and submission to euro-practice for tapeout. Designed the test pcb board with components for successful lab measurements. Successfully published paper on this design with our industrial partner.
- Design of a high speed (1GSps) SAR ADC CDAC and clock buffers. Working with layout contractor to implement the design in 28nm CMOS process.
- Two test chips taped-out successfully.
Research Assistant - Sabanci University - Istanbul, Turkey
(2013-09 - 2014-07)
- Designed 64x64 Digital Readout Integrated Circuits (ROICs) for LWIR/MWIR image sensors in 90nm CMOS with dynamic power reduction using single pixel digital ADCs. Contributed to cryogenic measurements of ROICs & CMOS BSIM4 modelling
- Successfully co-authored three papers and two test chips were taped-out and measured in an extremely limited time.
- Teaching-Assistant for EL303-Analog Integrated Circuits & EL202-Electronic Circuits II.
Design Engineer - Open-Silicon - Islamabad, Pakistan
(2012-07 - 2013-08)
- Custom ASIC Design for IP business related to DDR4 PHY and 2.5D Interposer based IO's, with high speed I/O design and layout in 28nm CMOS.
- Design and layout of intelligent DDR3/4 Combo PHY I/O Design with HBM/CDM ESD protection circuit and RC clamp design while co-ordinating with GF 28nm process team to learn the process limitations and modelling the ESD events.
- This enabled us to tapeout two test chips taped-out for the IP and co-authored a paper with my team.
Research Assistant - NUST School of Electrical Engineering and Computer Science - Islamabad, Pakistan
(2011-01 - 2012-06)
- Continuous-Time Delta-Sigma Modulator ADC design and layout in 250nm CMOS.
- Teaching-Assistant for Course EE424 VLSI Design (2011-2012) & for Electronics-II (2012).
EMC Test Engineer - Advanced Engineering Research - Islamabad, Pakistan
(2007-05 - 2010-05)
- EMI/EMC Testing for Electronic modules/ systems.
- RF systems design and testing.
Education
Master of Science - Electrical Engineering - NUST School of Electrical Engineering and Computer Science (2010-09 - 2013-03)
Bachelor of Electrical Engineering - Electrical Engineering - NUST College of Electrical & Mechanical Engineering (2003-10 - 2007-05)