Aman

UAV Engineer and FPV Drone Pilot with hands-on experience in building, configuring, testing and flying multirotor, FPV, surveillance, agriculture and fixed-wing drones. Experienced in flight-controller configuration, PID tuning, INAV, Betaflight and Mission Planner, LiDAR and GPS/GNSS integration, sensors, ESCs, telemetry and real-world field testing. Experienced in drone demonstrations and training for Army units and defence applications.

UAV Engineer at Apex UAV Pvt. Ltd. (2026-04 – Present)

• Build, configure, test and troubleshoot different types of UAVs including multirotor, FPV, surveillance, agriculture and fixed-wing drones.
• Configure and tune flight controllers, PIDs, ESCs, GPS/GNSS, LiDAR and other onboard sensors for stable and reliable flight.
• Work with INAV, Betaflight and Mission Planner for firmware configuration, calibration, flight modes, failsafes and system testing.
• Perform hardware integration, wiring, payload integration, pre-flight checks and flight testing from small to large UAV platforms.
• Diagnose flight-performance issues and optimize aircraft parameters through practical field testing and PID tuning.

Drone Engineer / FPV Pilot at Freelance Drone Engineer (2026-01 – 2026-04)

• Worked on freelance UAV projects for different companies, including drone building, configuration, testing and field demonstrations.
• Built and customized FPV, multirotor and other UAV platforms according to project requirements.
• Provided drone demonstrations and practical training to different Army units, covering assembly, configuration, flying and troubleshooting.
• Supported on-site testing, flight operations, system setup and technical troubleshooting for defence-oriented drone projects.

UAV Engineer / FPV Drone Engineer at Droneyards Aerial Solutions (2025-04 – 2026-01)

• Worked on the design, development, assembly and testing of FPV, kamikaze and quadcopter drones for defence applications.
• Built drones from scratch by integrating flight controllers, ESCs, GPS, LiDAR and other onboard sensors.
• Configured INAV, Betaflight and Mission Planner for flight performance, stability, navigation and operational requirements.
• Collaborated with the R&D; team on custom UAV solutions and participated in real-time flight simulations and field tests.
• Provided hands-on drone training to military personnel covering hardware assembly, software configuration and flight operations.

Embedded System Intern at Nerve Cells AI Pvt. Ltd. (2025-01 – 2025-04)

• Worked on an embedded system project to build a fixed-wing drone from frame design to hardware integration.
• Designed and implemented a wireless communication system using ESP32 and nRF24L01 modules.
• Integrated BLDC motors, ESCs, servos and LiPo batteries with practical power-management considerations.
• Developed ESP32 firmware to process joystick inputs and control flight-surface actuators.

Bachelor of Technology in Electronics and Communication – Deenbandhu Chhotu Ram University of Science and Technology (2021 – 2025)

Class 12 (HBSE) – S.D Sen Sec. School, Jagadhri (2019 – 2020)

Class 10 (HBSE) – Vishv Samta High School, Yamunanagar (2017 – 2018)