Skip to main content
Kritik

Kritik

Senior Project Engineer - DCS / PLC / C&I Commissioning

Talent
BengaluruMember since May 24, 2026
Yokogawa CENTUM VPEmerson OvationAllen-Bradley PLCDDCMISWonderware InTouchArchestrA IDEAlarm configurationCompressor-driven turbineSteam turbineHydro turbineGovernor tuningControl valvesMOVsSOVsPressure transmittersTemperature transmittersDensity analyzersPre-commissioningInterlock testingLogic validationCalibrationStartupLoad trialsST
·

Hire this person

Send a job offer directly to this candidate

Yokogawa CENTUM VPEmerson OvationAllen-Bradley PLCDDCMISWonderware InTouch

About

9+ years in erection, commissioning and programming of DCS and PLC systems for subcritical and supercritical thermal power plants and turbomachinery. Worked on Foxboro I/A Series, Yokogawa CENTUM VP, Emerson Ovation, Siemens S7-1200/1500 and Allen-Bradley systems. Commissioned steam turbines, hydro turbines, compressors and compressor-driven turbines, including governor tuning, speed/load control, anti-surge and protection logic.

Developed HMI/SCADA graphics in Wonderware InTouch (ArchestrA IDE) with tag mapping and alarm configuration.

Experience across the project cycle: PLC/DCS hardware and cabinet design, programming, HMI, documentation, internal tests, customer-witnessed FAT and site commissioning. Strong in loop checking, interlock and logic testing, calibration and troubleshooting of process control systems.

Experience

Project Engineer at Tri-Sen Turbomachinery Controls (2025-08 – Present)

  • Commissioning of hydro turbines, steam turbines, compressors and auxiliary systems from pre-commissioning to handover.
  • Governor tuning, speed/load control setup and protection logic implementation.
  • Loop checking, interlock testing and logic validation on Siemens S7-1200/1500 and Allen-Bradley PLC systems.
  • Integration of field devices with PLC/DCS and development of HMI screens.
  • Troubleshooting of turbine control, vibration and protection systems.
  • Internal tests and customer-witnessed FATs.

Lead C&I Commissioning Engineer at GE Power - NTPC Meja (2022 – 2025)

  • Commissioned the complete FGD system, including absorber, slurry handling, pumps, blowers and dewatering units, from pre-commissioning to operation.
  • DCS hardware configuration, cabinet checks and complete loop testing of field instruments and analyzers.
  • Calibration and commissioning of flow, level, pressure and temperature transmitters and pH, SO2 and density analyzers.
  • Interlock checking, protection logic validation and auto/manual operation testing through DCS.
  • Commissioning of control valves, MOVs and SOVs, including stroking, positioner tuning and function testing.
  • Supported startup, stabilisation and troubleshooting.

Senior Engineer at Tata Projects Limited - NTPC Vallur (3 x 500 MW) (2018 – 2022)

  • Erection and commissioning of instrumentation systems for 3 x 500 MW units, including installation, cabling and panel wiring.
  • Cold and hot loop checking from field instruments to DCS.
  • Commissioning of control valves and MOVs: calibration, stroke testing, torque / limit switch setting and fail-safe checks.
  • Developed and validated control and trip logic.
  • Designed and modified HMI/SCADA graphics, including tag mapping and alarm configuration.
  • Coordinated with cross-functional teams during startup, shutdown and load trials.

Junior Engineer at Krishna Instrumentation Works - Smart City Project (2017 – 2018)

  • Commissioning of IIoT-based water management system (flow and pressure transmitters).
  • Remote instrumentation and communication setup.

Education

B.Tech in Computer Science & Engineering – BBDEC, AKTU, Lucknow (2013 – 2017)

Reviews