Sunil Kumar

Skilled Welder with proficiency in TIG, STICK, FLUX, and MIG Welding. Methodical welding professional with extensive experience in planning, laying out, welding, and repairing steel products. Deep insight into applicable welding codes, specifications, and standards. Expert in operating automatic and semi-automatic equipment to perform welding and fabricating work. Familiar with custom fabrication, pipeline welding, structural welding, vessel welding, and equipment repair.

Welder and Fabricator - ELISHA ENGINEERING CO. Pte. LTD. - BA, FIJI ISLANDS

(2019-05 - 2025-04)

• Operating different kinds of welding machines, power and hand tools regularly.
• Cut pieces according to the drawing using a powered band saw, grinder, plasma and gas cutter.
• Handled metal reshaping, straightening and bending machines.
• Performed welding processes using Mig/Mag (flux cored/solid), Stick and TIG welding processes.
• Used rulers and templates to measure components for welding processes.
• Ensured that all work must be done right at the same time with quality and with observance of Safety rules and regulations.
• Assessed complete welding assemblies per project specifications.

WELDER (GTAW+SMAW) - TAKYEEF ELECTROMECHANICAL WLL - QATAR

(2017-06 - 2017-10)

• Qualified to weld carbon steel using GTAW/SMAW process
• Responsible for full welding of different sizes of pipe small bore or carbon steel pipe
• Checked the type of edge preparation and fit, including root gap, root face, bevel angle, alignment and joint cleanliness.
• Ensure that the filler rod and Electrodes are compatible with the base metal and that all surfaces to be welded are free from any kind of dirt (paint, grease, rust, etc.)
• Weld pipe with welding procedure specification and keep 100 per cent X-ray quality.
• Ensure that all work must be done right at the same time with quality and observance of safety rules and regulations.

BOILERS/HIGH PRESSURE TICKETED WELDER (TIG/STICK) - A CHAND ENGINEERING WORKS LTD - LAUTOKA, FIJI ISLANDS

(2016-11 - 2017-02)

SHUT-DOWN JOB

• Full welding of carbon steel and alloy steel pipes and various structural components.
• Checked the type of edge preparation and fit, including root gap, root face, bevel angle, alignment and joint cleanliness.
• Conducted repair and maintenance operations for the piping system as necessary.
• Laid out and cut materials in preparation for work to be done.
• Checked machinery and tools for safe operation.

WELDER (TIG/STICK) - SAMSUNG-TAKREER CBDC PROJECT IN RUWAIS REFINERY - AL-RUWAIS ABU-DHABI, UAE

(2015-08 - 2016-10)

• Full welding of all-size carbon steel, alloy steel and stainless steel pipes.
• Checked the type of edge preparation and fit, including root gap, root face, bevel angle, alignment and joint cleanliness.
• Ensure that the filler rod and Electrodes are compatible with the base metal, and ensure that all surfaces to be welded shall be free from any kind of dirt (paint, grease, rust, etc.)
• Weld pipe with welding procedure specification and keep 100 per cent X-ray quality.
• Ensure that all work must be done right at the same time with quality and observance of safety rules and regulations.
• Demonstrate flexibility with the ability to work quickly, effectively and safely in both shutdown and greenfield environments, working in live operating units under tight scheduling demands.
• Enhance project productivity with the ability to quickly build effective working relationships and work together with other team members to achieve common goals safely and efficiently.
• Keeping the workplace clean and observing safety at all times.

WELDER (TIG/STICK) - DOLPHIN OILFIELD EQUIPMENT SERVICES LLC - ABU DHABI, UAE

(2015-03 - 2015-04)

SHUT-DOWN JOB

• Full welding of carbon steel and alloy steel pipes and various structural components.
• Checked the type of edge preparation and fit, including root gap, root face, bevel angle, alignment and joint cleanliness.
• Conducted repair and maintenance operations for the piping system as necessary.
• Laid out and cut materials in preparation for work to be done.
• Checked machinery and tools for safe operation.
• Welded pipe with welding procedure specification and kept 100 per cent X-ray quality.

FABRICATOR/WELDER (TIG, STICK and MIG/MAG(Flux-cored/Solid)) - AECOM/GSS IN BAGRAM AIRFIELD (NATO) AFGHANISTAN UNDER THE CONTRACT OF UNITED STATES ARMY - AFGHANISTAN

(2011-12 - 2014-02)

• Consult job orders to comprehend assigned welding work.
• Weld components and assemblies using welding equipment and tools.
• Cut pieces according to work order using a powered band saw, grinder and gas cutter.
• Repair workpieces by dismantling, reshaping, straightening and reassembling parts.
• Handle metal reshaping, straightening and bending machines.
• Operate brazing and soldering equipment to assist in performing welding work.
• Repair improperly welded pieces and fabricate new pieces.
• Combined welding techniques, knowledge of metallurgy, and engineering requirements to produce quality work.

WELDER (TIG/STICK) - QATAR SHELL PEARL GTL PROJECT, HYUNDAI ENGINEERING&CONSTRUCTION (SUB-CONTRACTOR, SEJONG CORPORATION) - QATAR

(2009-10 - 2010-10)

• Maximise client resources by completing duties on time under tight timelines, adhering to the agreed-upon schedule, working efficiently while on site and ensuring punctuality at all times.
• Demonstrate flexibility with the ability to work quickly, effectively and safely in both shutdown and greenfield environments, working in live operating units under tight scheduling demands.
• Enhance project productivity with the ability to quickly build effective working relationships; Work together with other team members to achieve common goals safely and efficiently.
• Inspect grooves, bevel angles, root gap, root face, edge preparation, alignment and joint cleanliness.
• Ensure that the filler rod and Electrodes are compatible with the base metal and be sure that all surfaces to be welded are free from any kind of dirt (paint, grease, rust, etc.)
• Weld pipe with welding procedure specification.