Tool Setter Cum Supervisor - Emson Gears Limited - G.T. Road, National Highway 1, Sahnewal Khurd, Punjab 141120
(2022-07)
- Ensure the CNC hob sharpening machine is properly calibrated and aligned.
- Set the appropriate parameters for hob material, tooth profile, and module size.
- Adjust the grinding wheel speed and feed rate to achieve the desired cutting edge geometry.
- Verify and maintain the correct rake angle, relief angle, and chip breaker geometry during the sharpening process.
- Regularly inspect and replace the grinding wheel to maintain optimal sharpening performance.
- Document and record all the settings, including the tool and workpiece specifications, for future reference and consistency.
CNC Programmer, Setter cum Operator - Super Hobs and Broaches Pvt. Ltd. - B-22, Focal Point, Patiala, Punjab 147004
(2016-04 - 2022-06)
I possess an extensive understanding and proficiency in both the setup and operation of the CNC Luren LHG 3040
- Prepare the broaching machine and fixtures for sharpening operations.
- Verify the broach dimensions and condition before sharpening.
- Set the appropriate parameters, such as pitch, number of teeth, and relief angles, based on the broach design.
- Adjust the grinding wheel speed, feed rate, and depth of cut for accurate and precise sharpening.
- Ensure proper coolant flow and temperature control during the sharpening process.
- Inspect the sharpened broach for correct tooth geometry, clearance angles, and edge quality.
- Keep comprehensive records of all the settings, measurements, and inspections conducted during the sharpening process.
CNC Operator - Capital Tool Industries - 7-A, Industrial Estate, Sirhind Road, Patiala, Punjab 147004
(2015-06 - 2016-03)
- Expertise and practical experience in the operation of shaper cutter sharpening processes.
- Verify the shaper cutter dimensions and condition before sharpening.
- Set up the sharpening machine according to the cutter's specifications, such as module, number of teeth, and cutter profile.
- Adjust the grinding wheel speed, feed rate, and depth of cut to achieve the desired cutter geometry.
- Ensure proper cooling and lubrication during the sharpening process to prevent overheating and damage to the cutter.
Manual and CNC Hob Sharpening Machine Operator - Esgi Tools Pvt Ltd - B-6, Focal Point, Patiala, Punjab 147004
(2014-02 - 2015-05)
- Expertise and practical experience in the operation of Manual hob sharpening processes.
- Verify the shaper cutter dimensions and condition before sharpening.
- Set up the sharpening machine according to the cutter's specifications, such as module, number of teeth, and cutter profile.
- Adjust the grinding wheel speed, feed rate, and depth of cut to achieve the desired cutter geometry.
- Ensure proper cooling and lubrication during the sharpening process to prevent overheating and damage to the cutter.
- Machaning and instumant knowledge
- Handling and programming alingment about Cnc Saacke Profle grnding (Garman made), Cnc Tanu Profle grinding (Chaina made), luren LHG 3040 multitasking machine (Tiwand made), CNC Tanu Hob Sharpning machine, Cnc widma 200 Hob sharpning and Shaper Sharping machine, Manual Profle klinglnberg Hob sharping machine
- Good knowldeg allignment and understanding Istuamation like Calliper Vernior, Micrometer, Hight Gauge, Dial Gauge, Porfle prjectoer, Horizoantal Profle Projectoer, Slip Gauge etc
