Skip to main content
Vijay Anerao

Vijay Anerao

Maintenance Executive (Plant Engg.) & Administration

Talent
PuneMember since October 2, 2026
Team managementMachine geometrical restoration
·

Hire this person

Send a job offer directly to this candidate

Team managementMachine geometrical restoration

About

To serve with full commitment and perform beyond the stated responsibilities, to achieve overall. Organizational & personal progress by making the best use of my knowledge and skill.

Experience

Maintenance Executive (Plant Engg.) & Administration at Electro Pneumatic & Hydraulic (I) PVT LTD (2025-09 – Present)

Manufacturer of various types of the hydraulic presses as well as SPM presses other special purpose Machines. Ensuring maximum equipment uptime and operational efficiency through rigorous preventive, predictive, and breakdown maintenance. Through the Expertise in high-level troubleshooting of Special Purpose Machines (SPMs) and critical utility systems. Maintaining continuous improvement and operational excellence through TPM, Kaizen, and 5S methodologies.

  • Machine Maintenance: Lead troubleshooting, preventive, and breakdown maintenance for Special Purpose Machines (SPM)
  • Utility Management: Manage high-end utility systems like IR, Atlas & Kaeser Compressor, Cummins DG set.
  • System Diagnostics: Expertly diagnose and repair complex Hydraulic and Pneumatic system failures to minimize production downtime.
  • Root Cause Analysis: Utilize Why-Why Analysis to identify the source of abnormalities and implement permanent corrective actions.
  • TPM & Lean Manufacturing: Active member of the Total Productive Maintenance (TPM) team, driving Kaizen initiatives and maintaining 5S standards on the shop floor.
  • Predictive Maintenance: Execute Condition-Based Maintenance and continuous monitoring to extend equipment life and improve reliability.
  • Operational Planning: Manage maintenance workflows through SAP, overseeing 4M Management (Man, Machine, Material, Method) and updating TBM (Time-Based Maintenance) calendars.
  • Inspections & Reporting: Conduct daily/weekly manual inspections against PM check sheets and lead daily review meetings to resolve critical maintenance issues.
  • Prepare detailed engineering drawings for breakdown parts and analyse equipment history to optimize Annual Maintenance Plans.
  • Fully or partially Reconditioning of the machines.
  • STP, ETP,RO system, Water treatment plant & Administration utility maintenance
  • Manpower handling
  • Audit (IATF, EMS, OHSAS) documentation
  • Monitoring Departmental KPI’s
  • Knowledge of control system like Mazatrol, Fanuc & siemens
  • Team management
  • Machine geometrical restoration.
  • The ability to analyse data and information on to make rational decisions and solve problems.
  • The ability to inspect and repair machinery and equipment to keep it running efficiently and prevent failures.

JSM-2 (Junior Shop Manager) at Cummins India Ltd (2025-01 – 2025-09)

Manufactures high horsepower engines and heavy-duty engines for off-highway applications. Dept: – Mechanical Maintenance for machine shop

  • To Maintain the machinery and Sub assembly equipment of headline, block line, Conrod & Camshaft machining line.
  • Working on machine like Mazak, Daewoo, Yasda, Mori Seiki, Conveyor line, BFW SPM, Gun drilling, Honing machine, Conventional machines, Mag, Pegard, Homma, Cleantech washing, Makino Keyway, machine & other Special purpose machine
  • Breakdown Maintenance; - Carry out routine maintenance work, deal with emergencies, unplanned problems and repairs as early as possible with proper procedure.
  • Breakdown Analysis: - Daily breakdowns Why – why analysis/ RCA, & 7 step problem solving technic for chronical issues
  • Spare Parts Management: Monitor and manage spare parts inventory to ensure availability. Spare part planning for PM & special ac vi es all machines, Intend creation through GIEA.
  • Safety Compliance: Adhere to safety standards, productively identifying and addressing potential hazards. Ensure health and safety rules are followed. APM (Alternate protective measure) procedure for safely work. Work on HIRA for departmental machines & equipment.
  • Collaboration: - Work with production teams to reduce down me and schedule maintenance during off-peak hours.
  • Controller: - Fanuc controller - O, OM, OI series & updated version of Fanuc, Siemens, Mazak – Mazatrol - 640,
  • Working on industrial robot & Cobots
  • Working on Ball screw, Gear Box and Table Assemblies.

Junior Shop Manager-1 – Mechanical Maintenance for Machining line (MIW) at Tata Cummins Private Limited-2 (2022-02 – 2024-12)

Manufacturing various types of Head, Block & engines for commercial vehicles. Dept; - Machine in work (MIW)

  • Preventive Maintenance: Conduct regular preventive maintenance on Machining shop machines, Conveyors, Gantry as well as centralised coolant system to ensure op mal functionality & achieve PM compliance objective.
  • Breakdown Maintenance; - Carry out routine maintenance work, deal with emergencies, unplanned problems and repairs as early as possible with proper procedure.
  • Breakdown Analysis: - Daily breakdowns Why – why analysis/ RCA, & 7 step problem solving technic for chronical issues
  • Documenta on: IATF -16949 audit support for departmental documenta on. Time based monitoring activity (TBM). TO DO LIST (abnormalities) -Corrective/Planned Maintenance Ac vi es
  • Spare Parts Management: Monitor and manage spare parts inventory to ensure availability. Spare part planning for PM & special ac vi es all machines
  • Training: - Employee development leader for department. SOP making to standardize technical processes in a company to improve the quality of machine repairing ac vity & PM activity
  • Continuous Improvement: - Engage in improvement projects to enhance equipment reliability and performance. Maintenance cost saving project. Work on Various maintenance related Project to Achieve departmental KPI like MTTR, MTBF & machine UP me. Support to CPTM activity.
  • Predictive Maintenance: - Predictive maintenance planning, execution, geometrical report analysis & machine geometrical restoration. Machine red alert monitoring, Quality related issue resolving with production on team.
  • Safety Compliance: Adhere to safety standards, proactively identifying and addressing poten al hazards. Ensure health and safety rules are followed. APM (Alternate protective measure) procedure for safely work. Work on HIRA for departmental machines & equipment.
  • Collaboration: - Work with production teams to reduce down me and schedule maintenance during off-peak hours.
  • Industrial Robots: Diagnose and repair industrial robots to maintain production efficiency. (Fanuc robot)
  • Work on Ball screw, Gear Box and Table Assemblies.
  • Sunday & Off-day maintenance activity planning
  • Working on SIEMENS 840-D solution line as well as power line controller
  • Specht-600, Magnus-800, Valiant TMS, Nagel Honing, Gudel Gantry, Conveyor Line, Hosen leak test Machine, Bayer Machine, Fanuc robots & Centralise coolant system are maintained.

Apprentice trainee to Jr Engineer at KIRLOSKAR PNEUMATIC COMPANY LIMITED (2016-08 – 2022-02)

KPCL is in the business manufacturing Air, gas & refrigeration compressor packages vapor. absorption chiller, hydraulic & mechanical transmission products and gears. DEPT: - PLANT ENGG. (ACD)

  • Mechanical maintenance trainee
  • Attend & resolve the daily break down.
  • Breakdown & Preventive Maintenance of foundry machinery Viz., Induction Furnace, HT Furnace, Aluminium melting furnace, shot blasting.
  • Reading Mechanical Drawing, Hydraulic and Pneumatic Circuits.
  • Work on Ball screw, Gear Box and Table Assemblies.
  • Worked on the FANUC controller Pro 13 and many more.
  • Utility maintenance like Crane, compressor,forklift & genset.

Education

MATRICULATION – MAHARASHTRA VIDYALAY BARSHI (2013)

DIPLOMA in MECHANICAL – SSSPM’S POLYTECHNIC BARSHI (2016)

BE in MECHANICAL – KEYSTONE SCHOOL OF ENGINEERING (2022)

Reviews

Related