Langkau ke kandungan utama

Badri Bin Hassan

MANAGER (INDUSTRIAL ENGINEERING)

Bakat
NO. 6, LORONG LIMONIA 2, BERTAM LAKESIDE, BERTAM PERDANA 2, 13200 KEPALA BATAS, SEBERANG PERAI (U), PENANG, MALAYSIAAhli sejak 10 Ogos 2026
AutoCADIndustrial EngineeringLean ManufacturingValue Stream Mapping (VSM)Value Stream Design (VSD)KaizenTime StudyLine BalancingSAP SystemProduction Capacity Planning (PCP)VisTABLEOracle SystemAS400 System5S AwarenessISO 9001Cost ReductionOPEX PlanningPreventive MaintenanceRFQ (Request for Quotation)Prod. Line Support & Product Defect AnalysisJig & Tool Prepare & Maintain
·

Sewa orang ini

Hantar tawaran kerja terus kepada calon ini

AutoCADIndustrial EngineeringLean ManufacturingValue Stream Mapping (VSM)Value Stream Design (VSD)

Tentang

Manages to cover 2 plants which is KWPE, Prai (PG1) and KWPE, Batu Kawan (PG2) Develop new Plant Layout with detailed configurations starting from Incoming Warehouse, Production & until Outgoing Warehouse by using AutoCAD software tools Responsible for Plant re-layout with Continual improvement, Efficiency and Optimization of processes

Pengalaman

MANAGER (INDUSTRIAL ENGINEERING) - KW PRECISION ENGINEERING SDN BHD - 2717, LORONG PERUSAHAAN 6B, PRAI INDUSTRIAL ESTATE, 13600 PRAI, PENANG

(2024-07 - 2026-02)

  • Manages to cover 2 plants which is KWPE, Prai (PG1) and KWPE, Batu Kawan (PG2)
  • Develop new Plant Layout with detailed configurations starting from Incoming Warehouse, Production & until Outgoing Warehouse by using AutoCAD software tools
  • Responsible for Plant re-layout with Continual improvement, Efficiency and Optimization of processes
  • Responsible for Proposal layout, new line set up, Time study, Production Line utilization, Capacity, Manpower Headcount analysis, etc
  • Improvements activities & Kaizen with Statistical Tools such as Value Stream Mapping (VSM)/ Value Stream Design (VSD) in Lean Manufacturing Engineering
  • Cost saving/reduction with high-capacity production line
  • PG2 plant New Line Layout & Set-up for Control Room UHP CNC Bending Line with area 46.87m2 for Applied Materials (AMAT) customer products
  • PG2 plant New Line Layout & Set-up for Clean Room C100 UHP Welding Line 8 stations with area 246.91m2 for Applied Materials (AMAT) customer products
  • PG2 plant New Line Layout & Set-up for UHP Packaging with area 20.78m2 for Applied Materials (AMAT) customer products
  • PG2 plant Re-layout consolidates the main office for all staff. Space saving was 239.20m2
  • PG2 New Prod. CNC, Tool Room & Tool Workshop with area 488.20m2
  • PG2 Warehouse relayout with area 423.17m2
  • PG1 Resolved BOMBA, DOSH, and DOE audit through the new establishment of properly designated 8 locations area that comply with the relevant regulatory requirements and guidelines

MANAGER (INDUSTRIAL ENGINEERING) - INOKOM CORPORATION SDN BHD (Sime Darby Motor) - LOT 38, MUKIM PADANG MEHA, 09400 PADANG SERAI, KULIM, KEDAH DARUL AMAN

(2022-12 - 2024-06)

  • Manages a team of engineers & technicians to establish work measurement programs/studies to develop standards for resources utilization and ensuring efficiency through all phases of production
  • Optimize processes, systems, or organizations by developing, improving, and implementing integrated systems of people, money, knowledge, information, and equipment
  • Designing production layout by applying AutoCad and processes that increase productivity, eliminate wastefulness, and reduce cost while maintaining quality standards
  • Cycle time studies, line layout and process methodology to ensure the efficiency
  • Analyse, and visualization of production systems parameters (Cycle time, utilization, change-over, lead types versions of each product) with efficiency
  • Analyse the planning and implementing activities for process/product in order to reduce manufacturing costs
  • Responsible of reporting improvements systematically and continuously as well as Kaizen cost reduction implementation
  • MTM analyses (method of measuring time)
  • Define and monitor the KPIs
  • Support to establish business plan figures
  • Involve in cost reduction projects
  • MPlan HC (headcount) budget planning
  • CAPEX & OPEX planning
  • Line and machine capacity planning with workforce

ASSISTANT MANAGER / STAFF ENGINEER (INDUSTRIAL ENGINEERING) - CONTINENTAL AUTOMOTIVE COMPONENTS MALAYSIA SDN BHD - 2455, MK 1, TINGKAT PERUSHAAN 2A, PRAI INDUSTRIAL ESTATE, 13600 PRAI, PENANG

(2011-05 - 2020-07)

  • Plant Layout, Plant Transformation Project & Floor Space Calculation & Reporting by applying Microsoft AutoCAD and VisTABLE touch tools
  • Plant Strategy Project
  • Production floor utilization and Line Layout improvement with flow optimization
  • Predetermines Standard Time, Line Balancing, Process Cycle Time improvement with work content analysis
  • Improvement activities with Statistical Tools and Value Stream Mapping (VSM) in Lean Manufacturing Engineering
  • Assembly Technology, Processes and Method Time Study and Pre-Production cost calculation
  • Production and quality activities with 5S awareness
  • SAP system (Production Routing & Time Study)
  • Production Capacity Planning (PCP) Implementation
  • RFQ (Request for Quotation)
  • Kaizen and etc
  • Certified (Employee Lean Certificate) – Result: ELC (Silver)
  • Certified (Employee Lean Certificate) – Result: ELC (Bronze)
  • Plant Strategy Project - PCP (Production Capacity Planning) Implementation. Result: Implemented In-plant specific tool for Production Capacity Planning by using SAP system. Fully utilized on 25th May 2018
  • Plant Strategy Project - Low Volume line and OES Consolidation line for space saving. Result: Achieved 516.28m2 free space @ (RM229,335.09) on Dec 2017
  • Plant Strategy Project – Plant Relayout (Construction). Result: Manage to complete new building Warehouse & R&D extension, Multi-Level Car Park and Building 5 (Connection) as targeted by end of 2018
  • Plant Strategy Project – Plant Transformation Project. Result: Completed relocate and relayout all affected lines to new building 5 (Connection), new Warehouse (Electronic) and R & D Office, Lab, Facilities, etc

MANUFACTURING / PRODUCT ENGINEER - EATON ELECTRIC SWITCHGEAR SDN BHD (Formerly known as Delta Switchgear Sdn Bhd) - 2413, LORONG PERUSAHAAN 10, PRAI INDUSTRIAL ESTATE, 13600 PRAI, SEBERANG PERAI (U), PENANG

(2004-06 - 2009-05)

  • Involved in area of Metal Stamping, Welding, Painting, Plastic Moulding, Metal Enclosures Assembly, Small Devices Assembly, Components & Parts Assembly, etc
  • Design Distribution Board, Consumer Unit, Panel Board, etc, and plan economic production processes for the manufacture of products
  • Provide engineering support in all areas of technical aspects such as, Drawings, GAD, New Items (parts), Costing, Quotation, etc
  • Internal and external product audits
  • Provide test samples for Certification such as SIRIM, KEMA, etc
  • Handling project to provide samples to customers as requested to fulfill all their requirements
  • Understand and anticipate customer needs and liaise with Sale/Marketing personnel to develop suitable products
  • Oracle system (BOM). Implementation of Enterprise Common Platform (ECP) Project
  • Lean Manufacturing
  • Solve all customer complaint issues
  • Process Cycle Time, Routing & Ergonomic improvements & MM System
  • Provide Engineering & Technical to manufacturing in developing new process
  • Continues improvement to process optimize yield, quality, productivity and cost
  • Work study activities and optimize the efficiency of production
  • Sustain/Support activities and documentation in new process developments and continues improvement through innovations
  • Assist in updating and upgrading the manufacturing process and technology to keep ahead
  • Enterprise Common Platform (ECP) project - Oracle Implementation. Result: Successful implementation of ECP project which is transition from old MM System to new Oracle System in July 2007
  • Lean Manufacturing – Standardization Work (SW) Result: New implementation of Lean Manufacturing in Penang Plant and take part as tool champion of Standardization Work (SW)

PROCESS ENGINEER - FLEXTRONICS TECHNOLOGY (M) SDN BHD (Formerly known as Xerox Corporation (Penang) Sdn Bhd) - 1088 MK6, TINGKAT PERUSAHAAN PRAI IV, 13600 PRAI, PENANG, MALAYSIA

(2000-06 - 2004-05)

  • Process, Product, Industrial Engineering (I.E)
  • Projects
  • New Product Transfer
  • ISO14000, ISO 9001
  • Bill of Material (BOM)
  • Process flow & Work Instruction
  • Process of Standard Time & Line Balancing
  • Prod. Line Support & Product Defect Analysis
  • SPC, FMEA & TPM Project
  • Kaizen activities & Others, etc
  • ISO14000 Certification – Contribution as member of ISO14000. Result: Achieved ISO14000 Certificate
  • ISO14000 – Internal Auditor. Result: Officially appointed as Internal Environmental Auditor as dated effective 01st August 2002
  • ISO9000 - Internal Auditor. Result: Officially
  • Beyonics Relocation Project - Contribution as member of Project. Result: The machines was successfully relocated to actual location
  • IPC-A-610 – Certificate of Acceptability of Electronic Assemblies. Result: Successfully completed the Worker Proficiency Training Course on 27th February 2003

MANUFACTURING ENGINEER - TIM ELECTRONICS SDN. BHD. - PLOT 111A, BAYAN LEPAS INDUSTRIAL ESTATE, 11900 PENANG, MALAYSIA

(1996-10 - 2000-06)

  • Process
  • Product
  • Industrial Engineering (I.E)
  • Production Line / Sub-Assembly Layout
  • MOST, MTM
  • Production Time Study & Line Balancing
  • New Product Transfer
  • Bill of Material (BOM)
  • AS400 System
  • Manufacturing Instruction (MI)
  • Bar Code Printing
  • Sub Material study & control
  • SPC & FMEA
  • Lead training as product transfer to production
  • Quality Improvement Activities
  • Projects
  • Others, etc
  • Turnkey 1 project (06rd February 1999) – Result: Quality Improvement Team Competition (Improvement activities)
  • New Product Transfer (October 1998) – Result: AQ4/5 Model Facsimile machine
  • New Product Transfer (March 2000) – Result: Developer for Facsimile machine

ENGINEERING ASSISTANT - PERNAS NEC (KEDAH) SDN. BHD. - LOT 9, TIKAM BATU IND. ESTATE, P.O. BOX 21, 08007 SUNGAI PETANI, KEDAH DARULAMAN, MALAYSIA

(1992-08 - 1994-08)

  • Engineering Project for Network Systems
  • Local Content Projects
  • Installing Telecommunication Equipments
  • Dealing with Suppliers about Parts
  • Evaluation of Suppliers and Parts
  • Supervise Engineering Technicians

TECHNICIAN - MOTOROLA MALAYSIA SDN. BHD. - BAYAN LEPAS FREE TRADE ZONE (FTZ), PENANG, MALAYSIA

(1991-05 - 1992-07)

  • Set up Machines
  • Calibrate Machines
  • Repairing Machines
  • Preventive Maintenance (PM)
  • Modification Project for Machines
  • Supervise Machines

Pendidikan

SIJIL PELAJARAN MALAYSIA – SPM - DATUK HJ. AHMAD BADAWI SECONDARY SCHOOL (1980 - 1984)

Diploma - MECHANICAL ENGINEERING - SULTAN ABDUL HALIM POLYTECHNIC (1988 - 1990)

BTEC IN MECHANICAL & MANUFACTURING ENGINEERING - MECHANICAL & MANUFACTURING ENGINEERING - SWINDON COLLEGE (1994 - 1996)

Kemahiran

MANAGER (INDUSTRIAL ENGINEERING)

Ulasan

Berkaitan