Project Engineer at ZenithPro Energy Limited (2024-09 – Present)
- Manage multiple engineering, fabrication, and installation projects across Oil & Gas operated facilities, technical compliance and timely delivery in line with client requirements.
- Lead procurement activities for mechanical materials, fabrication services, and installation works, evaluating vendor quotations, negotiating commercial terms, and ensuring the supply of technically compliant materials within approved budgets.
- Coordinate the deployment of 10-20 maintenance and operational personnel deployments across active work fronts, ensuring proper reporting, equipment readiness, and compliance with client procedures.
- Mobilized to UTOR-39 rig-site to retrieve two joints of 9-5/8", 47ppf, R3 VAM TOP casing.
- Supervised cutting and fabrication of 7 pup joints (3 × 6 ft, 2 × 8 ft, 2 × 10 ft) to specification.
- Managed pressure tests, quality checks, and provision of couplings & thread protectors.
- Delivered completed pup joints to UTOR-39 within 48 hours, preventing drilling delays.
- Directed the installation of a submersible pump system for the Ughelli Production Centre (UPC) under HEOSL operations.
- Oversaw technical assessment, pump selection, site preparation, and deployment.
- Managed a multidisciplinary team during installation, electrical connection, load testing and commissioning.
- Restored full water supply to the facility while maintaining zero safety incidents and full compliance with HEOSL operational standards.
- Conducted site visitations and inspections at Okoloma Gas Plant, Enageed Resources Limited, Ingentia Energies Limited and Oando among other client facilities to clarify the full scope of work, define technical requirements, and support accurate costing and tender preparation. These assessments informed rehabilitation planning and operational improvement measures, ensuring alignment between site conditions and project deliverables.
- Managed the end-to-end procurement and supply chain for the installation of 4 units of C18-600kva diesel generators.
- Coordinated mechanical work fronts under the HEOSL OML 30 Maintenance Painting and Other Rehabilitation Works contract at Ughelli Pumping Station (UPS), covering piping, firewater systems, valves, equipment and protective coating works.
- Supervised surface preparation and protective coating works on approximately 3,396 m of fire hydrant lines and 1,800 m of process lines, including painting of pumps, valves and associated equipment.
- Coordinated testing and replacement of Polyken anti-corrosion protection on underground piping, including exposure, wrapping and holiday detection testing.
- Supervised sectional replacement of defective pipe sections, including cutting, fitup, welding, NDT and surface treatment/coating of replacement spools.
- Managed inspection, lubrication, pressure/leak testing and replacement of defective fire hydrant valves, including supply and installation of replacement valves.
- Coordinated fabrication and installation of pipe supports for fire hydrant lines, including raising near-ground pipe runs and correcting pipe alignment.
- Supported hydrotesting, leakage inspection, punch-list closeout, certification and handover activities for the fire hydrant network in accordance with client requirements.
Marine Engine Assistant at National Inland Waterways Authority (2022-07 – 2022-11)
Assisted in the operation and routine maintenance of marine propulsion and auxiliary engines on a 3000GRT supply vessel, including oil checks, filter changes, cooling system inspection, and generator servicing.
- Monitored engine room parameters (temperature, Pressure, fuel levels, lubrication system performance) and reported anomalies to second engineer for corrective action.
- Supported welding and fabrication tasks during dry dock operations, including rail-line maintenance, steel repairs and structural reinforcement activities.
- Carried out fresh water tank cleaning, bilge cleaning and general engine room housekeeping to ensure safe and compliant marine operations.
- Participated in shift rotations, ensuring continuous monitoring of engine operations and adherence to maritime safety standards.
Project Support Engineer at D. Dominion Industries Limited (Cummins Dealer) (2021-06 – 2021-10)
- Led installation of diesel generator systems (Cummins, FG Wilson, Perkins) including construction of reinforced concrete base, generator mounting, alignment, and full electrical integration (changeover panels, earthing, and control wiring).
- Supervised commissioning activities, load testing, and performance verification for new installed generator plants across industrial and commercial facilities.
- Oversaw routine and corrective maintenance of diesel generators, troubleshooting faults, supervising repairs, and ensuring availability of critical spare parts.
- Coordinated technical site assessments, prepared installation requirements, and supported clients in selecting appropriate generator capacities and configurations.
- Managed procurement process for mechanical and electrical components, reviewed technical quotations for over 1500 generator parts, and ensured timely supply-chain support for field operations.
- Supervised fabrication of soundproof generator enclosures, monitored welding, quality, insulation placement, and ensured compliance with industry standards.
- Supported field technicians during servicing operations, including filter replacement, lubrication services, alternator checks, and cooling system maintenance.
- Documented work reports, installation records, and quality control checklists to support warranty claims and client handover documentation.
Trainee Mechanical Engineer (IT) at SG Jones Nigeria Limited (2020-02 – 2020-12)
- Participated in Joint Investigation Visits (JIVs), ensuring HSSE requirements, incident reporting procedures, and operational standards were strictly followed.
- Supported in Mechanical repairs and servicing of forklifts, cranes, and low-bed trailers, ensuring equipment reliability and readiness for field operations.
- Monitored spare parts inventory, coordinated with vendors for replacement components, and ensured timely support for fleet and generator maintenance tasks.
- Prepared daily and weekly maintenance reports, documented job completion logs, and tracked operational expenses to support management decision making.
- Supported field technicians during heavy duty equipment diagnostics, lubrication services, hydraulic systems checks and component replacements.
