Lead Tubular Inspector - Global Well Deep Energy Services Ltd
(2023-01)
Client: Sterling Oil Exploration & Energy Production Company Ltd
- Inspect drill pipe, drill collars, heavy weight drill pipe, fishing tools and crossover subs to DS-1 requirements.
- Carry out cleaning, stenciling, thread preparation, dimensional measurement and connection inspection.
- Perform MPI/blacklight inspection, UT wall-thickness measurement, visual inspection and EMI.
- Identify and document pitting, damaged seals, corroded/galled threads and other defects; prepare inspection certification.
Lead Tubular Inspector - Mogavin Limited
(2022-01 - 2023-12)
Clients: CHARLVON / Discovery Rig 201 & 202
- Performed tubular inspection including drill pipe, dimensional measurement, thread inspection, MPI/blacklight, UT, VT and EMI.
- Assessed mechanical defects including pitting, damaged seals and corroded threads and documented inspection findings.
Lead Tubular Inspector - Greenhook Prime Nigeria Limited
(2021-01 - 2022-12)
Client: HILONG 27
- Conducted drill pipe inspection to DS-1 requirements, including connection cleaning, stenciling and dimensional measurement.
- Performed wet-fluorescent MPI/blacklight, UT wall-thickness measurement, visual inspection and EMI.
- Documented defects and prepared inspection records/certification.
Lead Rig Inspector / Lead Tubular, Lifting Gear & NDT Inspector - Westend Diamond
(2017-01)
Clients: Selective Marine/SMS, CHARLVON, NPDC, AGIP, Depthwize
- Performed rig derrick and substructure audits covering crown/travelling blocks, sheaves, drill lines, casing stabbing boards, tuggers, forklifts and cranes.
- Conducted visual/NDT inspections and load testing of lifting points, pad eyes, baskets, skids, cranes, forklifts, wire ropes, slings, shackles and handling tools.
- Performed PT on non-ferrous materials and UT thickness measurements on vessels, production platforms and flow lines.
- Inspected drill pipe, casing/tubing, HWDP and BHA to API/DS-1 requirements and issued inspection/certification reports.
- Performed instrument and pressure-gauge calibration and pressure/wetness testing of BOP, choke manifold and standpipe manifold.
Lead Tubular Inspector - Pasanda Global Resources Ltd
(2015-01 - 2017-12)
Client: KCA DEUTAG
- Inspected drill pipe, drill collars, heavy weight drill pipe and BHA to DS-1 requirements.
- Performed cleaning, stenciling, dimensional measurement, thread preparation/doming and doping.
- Performed MPI/wet-fluorescent blacklight inspection for fatigue cracks, UT wall-thickness measurement, VT and EMI.
Lead OCTG Inspector - Geoplex Drilling Technology
(2011-01 - 2015-12)
Client: Transocean
- Prepared and inspected tubulars, fishing tools, casing, tubing, handling tools and rig mast to API/DS-1 requirements.
- Performed dimensional measurement and NDT including EMI, MPI, VT and UT on welded areas, pad eyes, lifting equipment and handling tools.
- Inspected thread connections and identified pitting, damaged seals/threads, galling and over-torque conditions.
