Vijayan Chand
Technical Expert | HV-EWIS, Battery System & Power Distribution | Electric & Hybrid Aircraft | Automotive
Deze persoon inhuren
Stuur een vacature direct naar deze kandidaat
Over
Technical Expert/ Program Manager, Solution oriented, specialized Electromechanical systems expert. With 15+ years of experience in low / high-voltage electrical systems, HV EWIS, battery integration, and power distribution architectures across electric aircraft, EV bus, and automotive platforms. Proven track record of delivering complex technical programs while serving as principal technical lead.
Technical Program
Manager with Team, supplier & Customer management.
Ervaring
Technical Consultant – HV Systems & Battery Integration at VAERIDION (2026 – Present)
Project: Microliner – Electric Aircraft
- Design of HV Power Distribution Unit comprising all the electrical switching components, busbars, connectors etc. which has to be accommodated in the aircraft.
- Design proposal and conduct design reviews.
- Design of Battery module interface unit for early development of battery pack.
- Effective routing of HV cables and optimizing the architecture.
Technical Project Lead – High Voltage High Power EWIS at GKN Aerospace Netherlands (2023 – 2025)
Project: Hybrid Electric Propulsion Aircraft Program
- Led & responsible for technical delivery of HV-EWIS system for Electric Hybrid aircraft by meeting safety and performance standards.
- Contribute to the definition, architecture, and integration of aircraft high-voltage electrical systems, EWIS, and battery interfaces.
- Capture, decompose, and manage HV system requirements, ensuring traceability from system definition through verification and certification.
- Collaborate ICDs definition with customer. Contribute to component sizing, verify by simulation against flight profile.
- Perform trade studies & design optimization
- Guide HV EWIS design covering routing, shielding, grounding, separation, and installation compliance.
- Support DMU integration of HV systems within the aircraft CATIA 3D environments. Carryout Design reviews.
- Organized and Led PDR review (& plan CDR) to ensure design meet the production readiness.
- Coordinate and perform EWIS system safety analyses (FMEA, FTA) aligned with ARP4754A / ARP4761 methodologies.
- Arc-fault analysis & mitigation /protection to comply CS25-1707/1711
- Built a design validation framework (V&V) ensuring traceability, supporting airworthiness certification per CS25 subpart H
- Define Plan and support validation & verification activities for component and harness testing against DO-160
- Fostered cross-functional collaboration between procurement, planning, manufacturing, for timely project delivery.
- Interface with suppliers for HV component definition & testing.
- Collaborate with manufacturing team to resolve the production issues.
- Monitor & mitigate Technical & program risks.
Senior Engineer – High Voltage Components at GKN Fokker Elmo Netherlands (2021 – 2023)
- HV Component: Led development and selection of HV connectors and cables for Advanced Air Mobility (AAM) project.
- Requirement Management: Managed technical requirements in Polarion, overseeing V&V reviews to ensure compliance with aerospace standards.
- Develop HV cable specifications tailored to customer requirements.
- HV connector Supplier development & PDR. Define verification plan.
- Acted as technical interface between system engineering, certification teams, and suppliers.
Electro-Mechanical Systems Specialist – Battery Systems at A123 Systems (2017 – 2020)
- Designed and validated High Voltage battery pack harness integration on Karma Automotive sports car platform, ensuring optimal power distribution and safety.
- Applied ISO 26262 standard for risk assessment, validation, and certification of automotive battery E/E systems, enhancing safety compliance.
- Coordinated with Chinese suppliers for harness production, conducting technical audits and tests to ensure production quality and reliability.
- Defined 48V battery pack electrical architectures, including contactors, fusing, sensors, and HV harnesses. Coordinate with different teams to complete the design loop.
- Performed safety and risk assessments per ISO 26262 safety methodologies.
- Conducted comprehensive technical design reviews and validation testing before production for successful project delivery.
- Led a team of 5 offsite engineers and lead project management activities.
- Established and managed offsite development team, enhancing cost effectiveness and maintaining high technical standards.
Program Manager (Technical) – ES& ID Systems at L&T Technology Services (2020 – 2021)
- Led battery and HV electrical system integration programs for European automotive OEMs.
- Coordinated cross-functional teams across electrical, mechanical, production disciplines
- Managed resource planning, recruitment, and training guidance, contributing to team development.
- Achieved budget control and resource approval, maintaining cost efficiency and profit margins.
- Drove business development through technical meetings and proposal writing, securing RFI opportunities.
Senior Consultant – Electrical Wiring Systems at Komatsu Mining Trucks (2015 – 2017)
- Designed and released HV electrical harnesses for large electromechanical Dump trucks.
- Developed schematics and harness designs using Siemens Capital Logic / Capital Harness.
- Defined technical specifications for control panels, power distribution, and grounding systems
Project Manager – Vehicle Electrical Systems CoE at L&T Technology Services (2010 – 2015)
- Established and scaled Center of Excellence for Vehicle Electrical Systems, transforming it into global horizontal service department with 25 engineers.
- Defined technical standards, processes, and best practices for wire harness design, electrical architecture, and schematic development.
- Successfully deployed CoE services across customer accounts conducting technical capability demonstrations across the USA.
- Served as principal technical expert for automotive electrical systems, wire harness design, and electrical architecture.
- Developed technical training curriculum and mentored engineers on electrical system fundamentals, CAD tools CATIA, NX, Solid edge, Capital Logic, and industry standards.
- Conducted technical reviews ensuring manufacturability, compliance with OEM standards, and quality.
- Provided technical consultation to customers on complex electrical integration challenges and design optimization.
- Managed resources across six U.S. client locations while ensuring seamless offshore delivery and project tracking.
- Led proposal preparation, bidding activities, and customer technical discussions to align requirements.
- Directed project tracking, revenue/invoice tracking, and resource management contributing to operational efficiency.
- Established electrical systems domain in Engineering service portfolio strengthening organizational offerings.
Opleiding
Bachelor of Engineering in Mechanical Engineering – Coimbatore Institute of Technology
Diploma in Mechanical Engineering – Thiagarajar Polytechnic