John Dave Linog

To ensure efficiency in all assigned directives, obtain and maintain a high standard of work following proper procedures within the limit of responsibilities. Seven years of experience in the field of construction operation and quality control work. Implementation of quality jobs in the field of electrical works.

Implements quality standards based on the specification. Possessed adequate experience in implementing and executing tasks required in promoting services that will correlate in obtaining common company objectives of providing quality output in all aspects of work. Involved in various projects including construction of Power plants, Industrial plants, Commercial buildings, residential houses and Factory establishments.

Over five years of experience as a Safety Officer implementing Occupational Safety and Health standards as set by the Department of Labor and Employment.

Safety and Risk Specialist - A+ Power Services Inc. subsidiary of Aboitiz Power Corporation - Brgy.Kasambagan, Cebu City

(2025-06)

• Develop and implement Safety Plans and procedures specific to electrical engineering projects
• Conduct regular site safety inspections to ensure compliance with safety standards
• Ensure the proper use of personal protective equipment (PPE) and safety protocols
• Coordinate and deliver safety training to workers and contractors involved in electrical projects
• Perform risk assessments for electrical projects, identify potential hazards and implement mitigation measures
• Conduct risk analysis and prepare reports on safety hazards and risk levels in electrical systems and installations
• Identify and evaluate safety risks related to electrical equipment, tools, and machinery
• Ensure compliance with national and international electrical safety standards (e.g., IEC, OSHA, NFPA, etc.)
• Monitor and enforce compliance with all legal and regulatory requirements related to electrical work
• Stay updated on electrical engineering safety regulations, best practices, and industry standards
• Investigate accidents, incidents, and near-misses involving electrical equipment or systems
• Prepare reports on safety incidents, offering recommendations for corrective actions to prevent future occurrences
• Liaise with regulatory authorities during the investigation of electrical safety incidents
• Maintain detailed records of safety inspections, audits, and compliance assessments
• Prepare safety performance reports and risk management documentation for stakeholders
• Ensure that all safety protocols, risk assessments, and safety plans are up to date and available for review
• Work closely with project managers, electrical engineers, contractors, and other stakeholders to ensure that safety is integrated into every aspect of the project
• Act as the main point of contact for all safety-related issues on electrical engineering projects
• Foster a culture of safety and open communication on site, ensuring all workers feel comfortable reporting potential hazards

Senior Supervisor Safety Officer III - Franklin Baker Incorporated - Darong, Sta Cruz, Davao Del Sur

(2022-07)

• Implements Occupational Safety and Health Standard based on RA 11058
• Promotes safety and health programs to ensure injury free workplace
• Conduct risk assessment
• Conduct ocular inspection in work areas
• Conduct accident investigation and recommend control to prevent recurrence of incidents
• Coordinates safety meetings with plant managers and service providers to ensure safety compliance
• Promote zero accident programs
• Conduct safety orientation for new hires and contractors
• Submit compliance reports and regulatory requirements

Safety Officer III - Techno Trade Resources Incorporated - R. Castillo Agdao. Davao City

(2021-01 - 2022-12)

Manufacturing Metal Plast roofing, PVC and P. E pipes

• Acts in an advisory capacity on all matters pertaining to health and safety for the guidance of the employer and the workers
• Conducts investigation of accidents as a member of the Health and Safety Committee and submits his separate report and analysis of accidents to the employer
• Coordinates all health and safety training programs for the employees and employer
• Conducts health and safety inspection as a member of the committee
• Maintains or helps in the maintenance of an efficient accident record system and coordinates actions taken by supervisors to eliminate accident causes
• Work with HR to set up a new employee on-boarding process for safety
• Provides assistance to government agencies in the conduct of safety and health inspection, accident investigation or any other related programs
• Enforce preventative measures
• Identify process bottlenecks and offer timely solutions
• Check if all the employees are acting in adherence with rules and regulations
• Prepare and present reports on accidents and violations and determine causes

Safety Officer II - Rad Green Solution Corporation - Venson St. Davao City

(2019-06 - 2020-12)

Manufacturing Pyroclave Optima

• Plan and implement OHS policies and programs
• Advise and lead employees on various safety-related topics
• Prepare educational seminars and webinars on a regular basis
• Review existing policies and procedures
• Adherent to all the rules and regulations
• Work with HR to set up a new employee on-boarding process for safety
• Conduct risk assessment
• Enforce preventative measures
• Identify process bottlenecks and offer timely solutions
• Check if all the employees are acting in adherence with rules and regulations
• Prepare and present reports on accidents and violations and determine causes

Electrical Supervisor/Pollution Control officer/Safety officer II - Phil fruits premium corp./Liberty fruits Kidapawan - Sitio Tandao, Mua-an, Kidapawan City

(2016-04 - 2019-05)

Deep frying Banana chips exporter and manufacturing

• Entail technical, enter personal and administrative responsibilities
• Install, maintain and trouble shoot electrical devices and equipment
• Conduct preventive and corrective maintenance schedules on plant electrical systems, process controllers and electrical equipment
• Interpret electrical drawing and schematic diagram
• Conduct cable splicing and cable termination in circuit breakers, transformers or other components
• Conduct inventory and purchase electrical supplies
• Ensure proper standard and safety measures
• Engage in environmental protection and environmental compliance
• Engage in occupational safety and health standards
• Conduct orientation and presentation of safety and health programs
• Conduct job hazard analysis

Electrical technician - Al Rushaid Construction Co.LTD. /EEI - Rabigh Independent Water Steam and Power Project Phase 2, Rabigh, Saudi Arabia

(2014-09 - 2016-02)

• Low Voltage Terminator
• Termination of fire detection and fire alarm system
• Termination of instrument cable, pressure transmitter, temperature transmitter MOV, Flow transmitter, and pressure switch
• Termination of Ethernet and telecommunication system
• Termination of Power and lighting cable in MDP
• Termination of control cable in Control panel and Switch gear panel
• Assist on GIS maintenance schedule
• Conduct cable testing such as loop testing, insulation testing, HI pot testing, current voltage testing and phase sequence testing

Industrial Electrician/Sales Representative - Phil box manufacturing trade and Allied Services Corporation - Matina, Davao City

(2014-05 - 2014-08)

Panel Board fabrication

• Wiring of control operating system of air circuit breaker and Vacuum circuit breaker
• Wiring of MTS and ATS control operating system
• Installation of Motor Control panel Such as Direct online, Forward/reverse and Wye Delta connection
• Promotes their panel fabrication and installation in Kidapawan Area

Industrial Electrician - Side wall engineering sales and services - Sibulan, Tibolo St. Cruz Davao del Sur

(2013-04 - 2013-12)

Engineering Services/Panel board manufacturing Project Base (Summifru Philippines corporation Tiboli, South Cotabato) (Hydro plant/Headcor

• Install, repair and maintain electrical components and electrical equipment
• Conduct pre commissioning and testing works
• Does trouble shoot on electrical devices and electrical equipment

Project contract electrician - ACQ Solomonic Builders Development Corporation - Sasa, Davao City

(2014-02 - 2014-05)

Building Construction

• Install and maintain wiring, control, and lighting systems
• Inspect electrical components such as transformers, circuit breakers and motors
• Identify electrical problems with a variety of testing devices
• Repair or replace wiring, equipment, or fixtures using hand tools and power tools

On the job Trainee (OJT) - Energy Development Corporation - Mt.Apo Geothermal Power Plant, Ilomavis, Kidapawan City

(2012-01 - 2012-12)

720 hours

• Assist in preventive and corrective maintenance scheduled
• Conduct Testing and visual inspection of electrical devices and equipment

Freelance Electrician - Freelance Electrician

• Conduct electrical wiring and installation
• Conduct quotation and estimation of electrical projects

Bachelor of Technology in Industrial Management - Major in Electrical Technology - University of Southern Mindanao - Kidapawan City Campus (2016-01 - 2017-12)

Diploma of Technology - Major in Electrical Technology - University of Southern Mindanao - Kidapawan City Campus (2010-01 - 2013-12)

Post Study - Master's in technology education (undergraduate) - University of Southern Mindanao - Kidapawan City Campus (2019-01 - 2020-12)

Registered Master Electrician - Professional Regulation Commission (2016-09)

Secondary - Ginatilan National High School (2003-01 - 2007-12)

Elementary - Mua-an Elementary School (1997-01 - 2003-12)