Welding Foreman - RAJ Water Treatment (Phi) - Philippines
(2020-11 - 2024-10)
- Renovation and expand of SUNMEC building located in Techno Park, Santa Rosa, Laguna
- Fire Exit Door and Stair at Process Assembly Area located in CITIZEN FINEDEVICE PHILIPPINES CORPORATION, FPIP, Sto. Tomas, Batangas
- Supervise Welding Operations
- Assign tasks and manage workflow
- Maintain safety standard
- Ensure quality control
- Manage material and equipment
- Monitor progress and report to management
- Ensure welding operations comply with relevant regulations, codes, and standard
Welding Foreman - Al Rashid Trading and Contracting Company (KSA) - Saudi Arabia
(2020-04 - 2024-10)
- Pipeline and Pump stations water transmission project from Jubail to Ras Tanura
- Pipeline and Pump stations water transmission project from Jubail to Dammam
- Pipeline and Pump stations water transmission project from 'The Line' Neom project Located in Tabuk Saudi Arabia
- Supervise Welding Operations
- Assign task and manage workflow
- Maintain safety standards
- Ensure quality control
- Manage material and equipment
- Train and develop welders
- Monitor progress and report to management
- Ensure welding operation comply with relevant regulations, codes, and standard
Welder SMAW/FCAW AUTOMATIC - Al Rashid Trading & Contracting Company (KSA) - Saudi Arabia
(2018-04 - 2020-04)
JOB DETAILS AND RESPONSIBILITIES
- SMAW and FCAW AUTOMATIC process
- Check the area for safety precautions
- Check the welding machine, grinders, and all consumables. If defect, don't use it, replace it immediately
- Check the welding joint, clean it if dirts are present (moist, grease, oil, paint, etc.)
- Weld in accordance with the qualified welding specification to avoid welding discontinueties, as a qualified welder, should be familiar with the welding specification and the essential variables
- Conduct heat treatment before welding as per as welding specification
- Clean the weld joint with the grinding wheel brush and grinding disc
- House keeping before leaving the area
- Pipeline water transmission from Jubail to Dammam project
- SMAW process (DOLLYMIX)
- CODE: API 1104, ASME B31.4
- Single 'V' Groove w/CJP
- Butt joint, Branch joint, Flange joint
- ELECTRODE CLASSIFICATION and POLARITY - E6010 root pass 3.2mm (uphill), DCSP/DCEN; E7010 hot pass 4mm (downhill), DCRP/DCEP; E7010 filling 5mm (downhill), DCRP/DCEP; E7010 capping 5mm (downhill), DCRP/DCEP
- PIPE SPECIFICATION - API 5L X60, 100 inches (OD) outside diameter, 25mm-35mm thickness, 12-17 meter length, 12-17 tons weight
- MACHINE/TOOLS USED IN CLEANING - Heavy duty grinder w/ wheel brush, Small grinder w/ 3mm grinding disc
- NDT (NON-DESTRUCTIVE TEST) - Visual Inspection, R.T. (Radiographic Test), U.T. (Ultrasonic Test)
- SMAW process (UPHILL)
- Pipeline water transmission from Jubail to Dammam project and pump stations
- Single 'V' Groove w/ CJP
- ELECTRODE CLASSIFICATION and POLARITY - E6010 root pass 3.2mm (uphill), DCSP/DCEN; E7018 hot pass 2.5mm-3.2mm (uphill), DCRP/DCEP; E7018 filling 2.5mm-4mm (uphill), DCRP/DCEP; E7018 capping 2.5mm-4mm (uphill), DCRP/DCEP
- PIPE SPECIFICATION - API 5L X60, 88 inches diameter (OD) outside diameter, 5-35mm thickness
- NDT (NON-DESTRUCTIVE TEST) - Visual Inspection, R.T. (Radiographic Test), U.T. (Ultrasonic Test), M.P.T. (Magnetic Particle Test)
- FCAW process 5G UPHILL Automatic orbital
- Double line pipeline, water transmission RTCC and WELTECH project from SWCC Riyadh to Jubail
- Butt joint
- ELECTRODE CLASSIFICATION and POLARITY - E71T-1C filling 1.2mm DCRP/DCEP; E71T-1C capping 1.2mm DCRP/DCEP
- SHIELDING GAS - Mixture 80% argon and 20% carbon dioxide
- PIPE SPECIFICATION - API 5L X60, 88 inches diameter (OD) outside diameter, 25mm thickness, 12-15m length, 12-15 tons weight
- 5G SMAW process (DOLYMIX)
- Pipeline water transmission from SWCC Al Shoiba Jeddah to Makkah
- ELECTRODE CLASSIFICATION and POLARITY - E6010 root pass 3.2mm (uphill) DCSP/DCEN; E7010 hot pass 4mm (downhill) DCRP/DCEP; E7010 filling 5mm (downhill) DCRP/DCEP; E7010 capping 5mm (downhill) DCRP/DCEP
- PIPE SPECIFICATION - API 5L X60, 80 inches diameter (OD) outside diameter, 20-25mm thickness, 12-15m length, 12-15 tons weight
- MACHINE/TOOLS USED IN CLEANING - Heavy duty grinder w/ wheel brush, Small grinder w/3mm grinding disc
Welder (SMAW) - Kanyu 168 Construction Inc. (Phi) - Philippines
(2017-11 - 2018-04)
JOB DETAILS AND RESPONSIBILITIES
- SMAW process
- Check the area for safety precautions, safety harness is a must as a welder structural
- Weld plate, steel column, round bar for structural steel
- Familiarize with the qualified welding specification and able to read welding symbols
- CODE: AWS D1.1, ASME Section IX
- GROOVE joints - Square Groove, Single 'V' Groove, Double 'V' Groove (CJP/PJP)
- WELD JOINT - Butt joint, Corner Joint, T-joint, Lap joint, Edge joint
- ELECTRODE CLASSIFICATION and POLARITY - E6010 root pass 3.2mm AC; E7018 filling 3.2mm AC; E7018 capping 3.2mm AC
- MACHINE/TOOLS USED IN CLEANING - Chipping hammer
Welder (SMAW) - Vista Green Builder Inc. (Phi) - Philippines
(2017-06 - 2017-10)
JOB DETAILS AND RESPONSIBILITIES
- SMAW process
- Check the area for safety precautions
- Check the equipments that will be used like welding machine, oxyacetylene cutting torch. If defect, dont use it, change it immediately
- Prepare and assemble components by verbal instruction
- Weld plate, angle bar, round bar for structural steel
- Groove Joint - Square Groove
- ELECTRODE CLASSIFICATION and POLARITY - E6013 root pass 3.2mm, AC; E6013 capping 3.2mm, AC
- MACHINE/TOOLS USED FOR FABRICATING/CLEANING - Speed Cutter w/ 3mm x 14 inches cutting disc, Small Grinder w/4 inches grinding disc
Welder (FCAW) - Arabian International Company (KSA) - Saudi Arabia
(2015-04 - 2017-04)
JOB DETAILS AND RESPONSIBILITIES
- FCAW process
- Check the welding machine and the grinding machine. If defect report immediately to the welding foreman or maintenance staff
- Check the welding symbol every welding joints and also the signature of the welding inspector specifying that it has passed inspection and ready to weld (able to read welding symbols and familiar with the qualified welding specification)
- Conduct heat treatment as per advice by welding inspector
- Perform gouging for CJP (Complete Joint Penetration) back weld
- Operate overhead crane
- Weld steel column (beams, angles bar, channel, plates and pipes)
- Code: AWS D1.1, ASME IX
- SPECIFICATION OF BASE METAL - 3mm to unlimited thickness
- GROOVE JOINT - Square Grove, Single 'v' Groove, Double 'V' Groove, Flaire Grove
- FILLER METAL CLASSIFICATION AND POLARITY - E71T-1 0.8mm-1.2mm, DCRP/DCEP
- SHIELDING GAS: C02 (carbon dioxide)
- Operated overhead crane
- NDT (NON-DESTRUCTIVE TEST) - Visual Inspection, U.T. (Ultrasonic Test), R.T. (Radiographic Test), M.P.T. (Magnetic Particle Test), L.P. (Liquid Penetrant)
- Sometimes weld galvanized and stainless steel
- MACHINE/TOOLS USED IN CLEANING - Small Grinder, Pencil Grinder, Chipping hammer
Welder/Fabricator GMAW (MAG-MIG) - Manar Al Omran (KSA) - Saudi Arabia
(2013-06 - 2014-06)
JOB DETAILS AND RESPONSIBILITIES
- GMAW (MAG/MIG) process
- Check the machines that will be used in the work, if they are ok without damage
- Check the blueprint all details list
- Prepare and assembles all components accordance to the blueprint
- Operate punching machine
- Operate overhead crane
- Operate bending machine
- Operate plate cutting machine
- Weld formwork, scaffolding, base jack and other construction materials
- Weld pipes rolling
- Shielding Gas: Co2 (Carbon dioxide)
- NDT (NON-DESTRUCTIVE TEST) - Visual Inspection
- MACHINE/POWERTOOLS USED IN FABRICATION - Heavy Duty Grinder w/7 inches grinding disc, Hummer Small/Big
Welder/Fabricator (SMAW) - Norbenjar Enterprises (Phi) - Philippines
(2012-12 - 2013-05)
JOB DETAILS AND RESPONSIBILITIES
- SMAW process
- Check the welding machine, power tools and all consumables. If defect, dont use it, change it immediately
- Check the area for safety precautions
- Check every details of the blueprint, and all the materials listed. Prepare it accordingly to the blueprint
- Operate punching machine, power tools and assemble all the components accordingly to the blueprint
- Weld plates, angle bar, pipes for gates, steel windows, metal drainage cover, staircase grill
- ELECTRODE CLASSIFICATION AND POLARITY - E6010 2.5mm and 3.2mm AC
- MACHINE/TOOLS USED - Electric drill, Small Grinder, Hammer Small/Big
