Engr Mech Sammar

Skilled in gas/steam turbines, rotary equipment, and project management in oil & gas and petrochemicals. Experienced in turbine commissioning, system testing, and flange/piping inspections per ASME and ASTM standards. Focused on reliability, performance optimization, and system integrity.

Mechanical Maintenance Engineer at International Petrochemicals (IPC) Private Limited (2023-12 – Present)

• Fabrication Installation Inspection and testing of Lube Oil Pipelines, Steam Lines and Cooling water Lines as per ASME B31.3.
• Equipment Inspection and Monitoring i.e. Daily Condition monitoring of Rotary equipment (Vibration, Pressure, Temperature, Noise) Visual Inspection Testing and Thickness testing of Pressure Vessels, Hydrotesting of Valves.
• Maintenance Planning and Scheduling of Rotary machinery (API 610, API 612) and static equipment (ASME Section VIII Pressure Vessels at Petrochemical Plant.
• Troubleshooting and Repairs Heat Exchangers Shell & Tube, E-10(Turbine Condenser Gasket Leakage rectification), E-22(HT Oil Cooler, Welding Tube Sheet and Tube Plugging Job), E-14(Tube replacement Job Planned).
• Reliability Improvement of Centrifugal and Positive Displacement Pumps.
• Compliance and Safety i.e. JHA (Job Hazard Analysis), Work at Height Plan, Work in Confined space protocols, Lifting Plan, Rigging Safety Toolbox Talk.
• Provide training to maintenance staff on proper equipment, maintenance procedures and safety protocols.
• Managed inventory of spare parts and tools, maintaining adequate stock levels for timely repairs.
• Created reports of maintenance activity to share with management for operational analysis.
• Developed and coordinated effective predictive, preventive, and corrective maintenance approaches.
• Conducted root cause analyses to identify recurring issues and implement long-term solutions.

Mechanical Maintenance Trainee Engineer at Oil & Gas Development Company Limited (OGDCL) (2022-03 – 2023-03)

• Ensure all maintenance of Turbomachines i.e. Pumps, Compressors, Turbines, Valves, Gas Blowers, and repairs are completed in time, cost effective and efficient as per company guidelines and standards.
• Displayed exceptional attention to detail while performing intricate tasks that required precision handling of small components.
• Supported team efficiency, assisting in the repair and replacement of faulty components.
• Major Overhauling of Gas Turbines Model PGT10 i.e., clearances axial and radial of blade to blade and blade to casing, Pre Dismantled Alignment readings, Visual Inspection of Axial Compressor Blades both rotor and stator, DPT testing of Turbine Wheel and Stator Guide Vanes, DPT of Liner and First Stage Nozzle Ring. Inspection of Journal and radial Kingsbury bearings
• Hot Gas Path Inspection Job of Gas Turbine Model PGT10
• High Wheel Space Temperature Inspection of Gas Turbine Model PGT10
• Dry Gas Seals replacement of BCL at Gas Compressor

Special Project Engineer at Curexa Health Private Limited (2023-08 – 2023-12)

• Designed & Fabricated Air to Water Heat Pump Geyser.
• Leading the design process of heat pump systems from concept to prototype stage.
• Conducting research to understand the latest trends, identifying potential areas of improvement, and creating new designs that optimize performance and energy efficiency.

Master of Science in Thermal Energy Engineering – National University of Science and Technology (2025-04)

Bachelor of Science in Mechanical Engineering – National University of Science and Technology (2020-01)