Dumitru Cucu

Industrial Dip Engineer with welding specialty and QA/QC Master Engineering and Management of Welding Processes and Control Multilingual (Romanian

• English
• Russian) experienced construction supervisor seeking challenging position to utilizing my proven abilities developed through over 25 years of supervisory experience gained working in construction supervision on shore refineries; platforms (topsides; jackets
• FPSO's); power plants
• Fmc
• Epc; and other locales domestic and international. Duties included supervising construction; field supervision; supervising pre commissioning; piping/erection; mechanical erection; piping & pipe supports installations; metallic structure fabrication/erection shut downs; punch list & reinstatement; painting; hydrotesting (oil; water; nitrogen; air); bolting; blowing; flushing (oil & water); flange management; equipment; valves; insulation; and commissioning support.

Piping Checker

Able to read and understand construction drawings including but not limited to P&IDs, piping isometrics, piping general arrangements, tanks, heat exchangers, , piping, pumps and nozzles alignments, construction specs ;Able to influence, motivate and encourage the achievement of results ;Good problem analysis and solving skills ;Good project and construction management skills Ultimately I am seeking to develop and advance within a multinational organization or expanding company.

Piping Test Pack and Pressure Test Coordinator at Steel Marconstruct SRL (2025-09 – 2026-06)

PROJECT - Mass Mintia Power Station (MGPS) - Romania 1750 MW / EUR 673.5 million in 2023 (AVAX scope) CLIENT - Mass Group Holding Ltd. (MGH) Organising piping pressure testing process at Site. The Mintia gas-fired thermal power plant in Romania will be the largest of its kind in the European Union when it’s commissioned

• Test Pack Management: Compile, check, and manage the workflow of Piping Test Pack (TP) folders, including P&IDs, isometric drawings, and test limits.
• Pressure Testing Oversight: Coordinate and witness hydrostatic/pneumatic pressure tests, ensuring correct test pressures and validation of test logs.
• Scheduling & Coordination: Coordinate with construction, pre-commissioning, and subcontractor teams to meet site testing schedules.
• Punch List Management: Identify deficiencies, track punch list items, and manage system walkthroughs for final handover (turnover).
• Documentation & Quality: Ensure compliance with piping specifications, ASME standards, and company procedures; verify, track, and archive completed documentation (dossiers).
• Safety & Inspection: Review temporary supports, test blinds, and isolations for safety; verify calibrated gauges and equipment isolation
• Coordinate and manage all Test Package (TP) Folders workflow toward all involved parties both internal and with subcontractor including interface with NoBo

QA/QC Dip-Engineer Piping/Mechanical at Northvolt (2024-05 – 2024-12)

Review of contractors' scope in terms of ISO 9001

• Quality Technical Specialist QA/QC Inspector
• Review the contractor's Inspection Test Plan and all QA/QC documentation
• Evaluate the QA/QC system implementation by the contractor on site and ensure compliance with their Quality Manual
• Ensure the contractor provides QA/QC procedures, method statements and current documents at the locations where they are to be used
• Visit the project site to supervise the construction activities. Ensure that the works are carried out safely and in line with quality standards, following contract documents
• Ensure the contractor performs inspections, sampling and testing of materials following the specified standards and as approved in the Inspection test plan
• Raise non-conformance notices (NCNs)/reports; site inspection notices (SINs) identify quality deficiencies
• Review the corrective actions proposed by the contractor, respond/follow ups and close out the procedure.
• Ensure the contractors have adequate QC personnel on-site during all production shift operations to perform the inspection and tests
• TPI Inspector: Expediting, Inspection, Coordination, Witness /FAT / Visual & Dimensional Check /Welding inspection / Coating Inspection /Hydrostatic Pressure Test witness /Piping NDT witness /Calibration check / Personal qualification compliance check /Steel Structures fit-up check/ /Drilling Liners torque witness /Material Inspection
• Inspection and documentation review /ITP, WPS, PQR, NDT Procedures compliance review / Pressure vessels/ Pumps / Skid units / Skid assembly.
• Reviewing technical documentation (ITP, material certificates, hydro static reports, WPS, WPQR, NDE reports)
• Standards: ASME; PED; EN;10204 (3.1 & 3.2 material certificates)

QC Specialist at Veltec Industrial Services (2022 – 2023)

The medicine factory in Kalunborg/ Denmark/, all utilities between the old factory and the new factory/extension

• Maintained and organized all records, documentation, and other files associated with quality engineering and inspection tasks.
• Inspected welds for quality standards.
• Preparing the entire final documentation and traceability of quality records known as Final Dossier Book.
• Day to day supervision of construction activities including relevant quality controls during prefabrication and site construction.
• Review, monitor and report daily the status of inspection and test activities.
• Assist in Visual inspection of fit-up, in-process welding, pre & post-weld inspection at various sites in line with project requirements.
• Assist in x-ray inspection, Magnetic Test Inspection, Ultrasonic Test Inspection, Visual borescopes inside pipe, Hydrostatic testing
• Documented all weld/joint numbers and locations by creating isometric drawings of all tie-ins and fabrication, preparation all as build.
• Verification of weld repair work, monitoring Welding activities as per WPS
• Maintaining of latest project specification, ITP’s, procedures, and drawings.
• Checking weld joint preparation, fit up, alignment & dimensional inspection as per drawings
• Shutdown ST1 Refinery Goteborg/Sweden, 2023
• welding repairs to heat exchangers and air coolers.
• controlled tightening of heat exchangers and air coolers.
• pneumatic pressure tests on heat exchangers and air coolers
• pressure washing, maintenance and repair of heat exchangers and air coolers.
• quality control of welds, compliance with NTD procedures, quality control of

Team Supervisor piping mechanical installation at Enerco Group AB (2021-06 – 2021-11)

Supervision of teams of welders and pipe locksmiths, assembly of pumps, new installations and technological lines, vessels, and shutdown connection to the old installation in the Husum Paper Mill and Sulfate Pulp Mill.

• Working on the design, maintenance, and development of a wide range of welding systems and equipment
• Evaluating processes, supervising welders on a project
• Working on the mechanical joints/documentation.design, maintenance, and development of a wide range of welding systems and equipment
• Training other welders on new techniques, processes, or changes in design
• Evaluating processes, supervising welders on a project and tweaking the process to make improvements

Supervisor Piping and Mechanical at J.Christof E & P (2018-03 – 2020-03)

TAR OMV Petrom, Ploiesti/Romania 2018 TAR Petromidia Constanta 2019

• Supervise and coordinate all activities of fabricators and welders in the shop and field.
• Responsible for safety, schedule and budget of all assigned work.
• Foster a climate of continuous improvement in safety, production, personnel relations, equipment, maintenance, and plant efficiency.
• Hire and train employees
• Reward and discipline employees.
• Assist in Planning and preparing fabrication shop schedules of all known and anticipated work, based on staffing and material resources.
• Layout mild steel and stainless steel heavy and light structure, frames, skids, piping, tanks, and other projects for fabrication. Including knowledge of machine set up.
• Provide safety, equipment operation and procedural training to fabrication shop staff, as needed.
• Piping Checker

Production Supervisor Piping and Mechanical Workshop at STEP Oil & Gas (2016-04 – 2018-02)

Client: Modec,Shell. Role:

• Monitor and supervise progress of all site construction, its adherence to design, schedule, and all standard operational procedures.
• Identify performance gaps, assure gaps are documents and correction plans are implemented to recover any identified gaps
• Coordinate on behalf of the owner together with the design department the design development process, submittals review, RFIs responses, shop drawings, etc
• Assure all contractrs perform according to the relevant Quality standards and per their contracted obligation

Site manager at Boccard Romania Srl (2010-08 – 2014-10)

Project: FMC Microcrystalline Cellulose Plant from Rayong‐Thailand Client: M+W Group. Role:

• Overseeing and supervising piping; supports; structures; equipment (reactors; pumps; tanks; and filters); specifications; drawings and design, pre-commissioning; valves; hydrotesting; bolting; flange management; insulation and painting; blowing; flushing; cleaning of piping spools prior to commissioning; and compliance with applicable codes.
• Served as liaison between field engineers and crafts to ensure construction drawings and specifications.

PhD – National University of Science and Technology Polytechnic – Bucharest – Romania (2025-09)

Master in Engineering and Management of Welding Processes and Control

Industrial Dip Engineer in welding specialty and QA/QC