Durai Raj

Durairaj

• An astute professional with Leven (11) years of Mechanical, Electrical &

  • Plumbing (MEP) experience.

• I had done project as M&E Coordinator in Tat Hin Builders Pte Ltd for A &

  • A Project for BHCC &

  • NPC in Singapore.

• I had done project as M&E Engineer in Right Projects Pte Ltd for A &

  • A Project in Singapore.

• I had done project as M&E Coordinator in Corebuilding Specilists Pte Ltd for A &

  • A Project for Bethany nursing Home in Singapore.

• I had done project as Assistant Engineer in MES Pte Ltd for BTO project SKN4C31 Project C in Singapore.
• I had done project as M&E Coordinator / Supervisor  in Shin Khai Construction Pte Ltd for HIP, ROH &

  • NRP Project in Singapore.

• I had done project as M&E Coordinator / Supervisor in Greenmark Construction Pte Ltd for Zenith project (10 storey Data center) in Singapore.

• Tat Hin Builders Pte Ltd as M&E Coordinator from Oct 2021 to Jan 2023.
• Right Projects Pte Ltd as M&E Engineer from Feb 2021 to Oct 2021.
• Corebuilging Specilists Engg Pte Ltd as M&E Coordinator from Jul 2019 to Jan 2021.
• MES Pte Ltd as M&E Coordinator from Mar 2018 to Jun 2019.
• Shin Khai Construction Pte Ltd as M&E Coordinator from Nov 2016 to Feb 2018.
• Greenmark Construction Pte Ltd as M&E Coordinator from Mar 2011 to Oct 2016.
• Preparing all M&E drawings, materials, Method of statement, Material sample list and drawing list.
• Drafting of M&E drawings such as Shop drawing, detail drawing & As-built drawing. 
• To submit Request for Approval (RFA) of M&E drawings and materials and sample material list and Method of Statement (MOS) to consultant and client for approval.
• To prepare and submit, Request for Information (RFI) to consultant. 
• To provide technical support to consultant and client in the resolution of technical issues when needed. 
• Review and analysis all M&E drawing, materials schedule/program of work.
• Attending weekly and monthly meeting along with consultant and client. 
• Arranging weekly and monthly meeting along with all M&E subcontractors.
• Day to day monitoring work and planning entire work.
• Preparing weekly and monthly report & Reported with Project manager and M&E manager and construction Manager.
• Engauge and coordinate and assist to M&E contractor for site work. 
• Monitoring of work as per specification and code of practices.
• Identification of subcontractors and suppliers & collection question & close coordination with subcontractors.
• Prepare material list and liaise with QS to order Martials from supplier. 
• Prepare and rising RFI to consultant and RE/RTO for inspection.
• Solve technical issue at site. Coordinate with Archi, civil and structural department. 
• Prepare VO for M&E work and submit to QS. 
• To support safety department by ensuring subcontractors are complying to safety procedure and requirement. 
• Prepare the project management system for M&E works and template for testing & commissioning.
•  Arranging RI inspection with QP for M&E work.
• Maintain all Quality Control Report (RFIs, Punch List, and NCRs).
• Completing, endorse all records from first inspection till final acceptance of M&E works.
• Prepare testing & commissioning documents to attend RI inspection with our team for HVAC, Electrical, Lift System, Fire protection and P&S system.
• Prepare all the approval drawings of PUB license holder endorsements for attend PUB inspection for Plumbing, Sanitary and NEwater.
• Prepare all the approval documents of QP endorsements for attend BCA Inspection at site.
• Prepare all the approval documents of QP endorsements for attend the TOP.

• Assist BIM manager for the site coordination meeting and issues.
• Responsible for the coordination and control of technical matters, quality implementation and site supervision.
• Knowledge & familiarity with the following software: Revit Architecture/ Revit Structure / Revit MEP / AutoCAD / ACC.
• Assist BIM Coordinators in creating, updating and revising BIM Models throughout the project life cycle.
• Update BIM Models based on contract drawings and latest information.
• Ensure integrity/ quality of the models.
• Generate documentation and shop drawings for BIM Models.
• Develop BIM Models with the correct parameters and attributes for BIM Based quantification and 4D simulation.
• Identify issues for BIM Coordinators where discrepancies occur during design stage.
• Identify issues for BIM Coordinators where clashes occur during CSD produce.
• To resolve clashes of CSD / RCP.

Roles and Responsibilities:

• Design & Build HVAC Systems for Cleanroom & Comfort Application.
• Heat load calculation using CARRIER and ASHRAE standards using manuals/
• latest HVAC ASHRAE E20 Form & based on building survey.
• Equipment selection FCU, AHU, VAU & EAU, ODU, Chillers, & Pumps based on

• AHU, VAU & EAU Design.
• Chiller Plant Room & Cooling Tower Space Management.
• AHU, VAU & EAU Space management.
• Cleanroom Layout with HVAC Zoning, Pressure Zoning & Door Orientation.
• Air Distribution System design.
• Chilled Water Pipe Sizing.
• Site Visits.
• Quantity Survey & Quotation Preparation.
• Liaising with Supplier, Contractors & Clients.
• Validation with pre commissioning of HVAC Systems.
• Mail Correspondence.

Roles and Responsibilities:

• ESS, Transformer, Control Panel, DB, ELV, Electrical riser, Draw pit, Cable laying & Trucking.
• Drafting all electrical drawing such as Lighting layout plan, Power layout plan with looping and SLD.
• Supervise and Monitor the Installation of electrical & instrument equipment,
• Cable’s, Cable tray, Lighting, Distribution board, control panel and Grounding System.
• Understand, interpret and work from various forms of project drawings such as

• Inspect, commissioning, troubleshoot, repair and maintain electrical, electronic and associated control systems and power circuits, power generating Equipment and switchgear.
• Inspect, commissioning, troubleshoot, repair and maintain emergency electrical
• Coordinate with vendors for loop check, commissioning and startup of packages Such as top side modules Power Generation, E-House, HP & LP Gas Compressors, Marine system, Water Injection, chemical injection, UPS and HVAC System. Systems such as emergency power generators, emergency switchboards, DBs and Lighting.
• Coordination with subcon and vendor of the electrical motors, panels, switchboard for spinning mills Erection, commissioning, maintenance & Trouble shooting and servicing of motors, Generators and transformers, switch board, and panel boards.
• Prepare SLD and submit to LEW endorsement.
• Conduct inspection with LED.

Roles and Responsibilities:

• Fire alarm, Sprinkler, Hose reel, Dry riser, Wet riser, Breeching Inlet, Fire Hydrant & Fire extinguisher.
• Design Development of Fire Protection and Fire Alarm System.
• Prepare project schedule, milestone report, catalogs, and OMM submission.
• Project coordination and supervision of site installation, testing, and commissioning.
• Ensure smooth and timely development of the project.
• Liaising with the client, subcontractors, and suppliers.
• To assist the Project Manager on overall site works related to Fire Protection and this shall be in line with safety requirements.
• Supervision of work, liaise with sub-contractors, site supervisors, foremen and workers regarding the overall fire protection system.
• Prepare fire protection layout plan and submit to QP for endorsement.
• Arrange and attend site inspection with QP and RI for fire system.

Roles and Responsibilities:

• Water tank, Cold & Hot water, Minor sewer system, IC, Back drop, Sump, Wash basin, Floor trap, Sink, WC, Urinary trap & NEW water.
• Providing professional work such as water and sanitary and Gas drawing, as-built drawing.
• Assist in preparing for PUB submissions and clearance when required.
• Supervise contractors, sub-contractors, suppliers and staff at the site.
• Liaise and work closely with the consultant, clients and subcontractors on the progress of Plumbing & Sanitary & Gas installation work to meet the project schedule.
• Drafting & designing of routing for Plumbing & Sanitary & Gas services drawings in AutoCAD.
•  Prepare detail design and working drawings such as schematic diagrams, single-line diagrams arrangement/layout drawings. 
• Coordinate with engineering team to ensure works are carried out in accordance with drawing specification. 
• Update all drawings as per site/vendor modifications for As-Built Drawings.
• Coordination of drawings with Clients / Main Contractors and updating of drawings base on Meetings and discussion and in compliance to Regulation Codes and Practices.
• Arrange site inspection with license plumber and QP.
• Arrange site inspection with PUB.

Roles and Responsibilities:

• Supports the service team on the commissioning, preventive maintenance and testing of equipment as well as to provide continual technical support to customers.
• Carry out testing and commissioning of CCTV, Access Control, Intercom, Fire Alarm, AV, Public-address and other Security & Communication systems;
• Analyze equipment failures to determine cause and recommend/take corrective actions.
•  To complete all assigned jobs are completed timely and meet customers ‘specification.
•  Provide support to Project Team on the implementation of new projects.
• Attend and carry out rectification works at site.
• Carry out standby duties as per roster for urgent service requests outside office hour.
• Provide customers with continuous technical and operational program support.
• Provide support to projects during DLP period to ensure all rectification works are completed before handover.

Academic Qualifications

• Bachelor of Mechanical Engineering in Anna University - B.E (2006 – 2009).
• Diploma in Mechanical Engineer in Anna University – D.M.E (2002 – 2005)

• Building Construction Safety Supervisor’s Course
• Managing Work At-Height Course
• Basic Concept in Construction Productivity Enhancement (BCCPE)