Structural Engineer
Send a job offer directly to this candidate
Experienced in both Brownfield &
• Greenfield EPCI projects &
• FEED Study and thorough knowledge in design of outfitting structures in coordination with designer and multi disciplines tasking. Perform both analysis in structural main steel design & secondary steel in adherence to international design code such as API RP2A, ISO/Eurocode, DNVGL, DNV-ST N001, American Bureau of Shipping (ABS), AISC &
• Norsok standard. Work in Engineering Design &
• Analysis on onshore/Offshore EPCI project such as Topside, module &
• Jacket. Further work on Onshore fabrication yard comprises of roll-up, Upending and Heavy Lifting analysis.
• Installation work involves in design analysis of Grillage and sea fastening. Develop/produce drawings through Autodesk Inventor, E3D, PDMS/Micro station or Autocad with prime emphasis in offshore Lifting DNV-OS-H205 (NORSOK R-002)/sea-fastening, transportation &
• In-place analysis in a Limit state as SLS/ULS/ALS/FLS as per Norsok N001. Work in "Jotun A" FPSO (EPCI project) for Balder field. FEED study done by Aker Solution. Project involved in Turret replacement, and modify all module, flare tower &
• Helideck. Involved in global analysis and Fatigue life extension for another 25 years extension. Had been to Offshore for a site survey in BP Platform (Vallhall and ULA platform) on different occasion. Design analysis and integrity check are done in global analysis and in accordance with codes mention above standard. Local check were also perform in finite element analysis (FEA) and hand calculation. Work also in ERHA FPSO topside module in Saipem Construction Nigeria (SCNL) yard in Port Harcourt and Rumuolumeni in Lagos. While main hull was constructed in South Korea by Samsung. Work in Subsea Detail Engineering Design for Yggdrasil Export Spool (Aker BP project). Scope of work involve in structure design, like PLEM/PLET &
• Forge Wye Piping. SACS Software for the Global Analysis & local check on Nodes & member using Ansys &
• Mathcad spreadsheet. Additional scope design check of Sweepolets/weldolets for ForgeWye Piping using DNV, ISO, API &
• ASME Std. (Code check used were LFRD, Norsok, Eurocodes &
• DNVGL) Work in Subsea structure for Imenco AS. We designed Detail Engineering for Subsea Structure and its appurtenances intended for subsea installation. Also involved in Pile Gripper Le TrePort Offshore Wind farm for a 496 MG Watt, includes Machining &
• Fabrication on all our Structural product. Develop drawings in Autodesk Inventor &
• Autodesk Vault. Analysis in all our product are done by ANSYS Non-Linear Analysis.
Structural Engineer - Edison Design & Construction - Manila Philippines
(2025-02)
Responsible for structural design analysis done by Staad pro globally and local check in ANSYS/ABAQUS and by hand calculation on Mathcad. Drawings done in Autodesk Inventor & Autodesk Vault for checking. Works in Norway thru TEAMS. Uses ANSI/ASCE & UBC for Environment loads. All codes implementation are within the latest appropriate International & National Standards Codes of practice & requirements like ACI for concrete & AISC for Steel of "good engineering practice".
Structural Engineer - Imenco AS - Vollvegen 66
(2023-12 - 2024-12)
Work for Imenco Pile Gripper (Wind Jacket Pile connection) & Detailed Engineering for Design of our Anode Banks & Piranha Solution for our subsea Anti corrosion product. Analysis were done through Ansys WB ver 2023. Also involved in Machining & Fabrication on all our Structural Steel products with drawings produce by Autodesk Inventor 2022 & Autodesk Vault.
Principal Structural Engineer - Wood Group in Norway - Forus-Stavanger
(2022-11 - 2023-10)
Work in Detailed Engineering Design of Structure protection for 28 inches diameter Forge Wye Piping. Structure protection is necessary due to dropped Object & fish trawling same as PLEM or PLET. Using SACS/FS2000 software for the Global Analysis & local check on Nodes & member using Ansys &
• Mathcad spreed sheet. Additional design check for Sweepolets for ForgeWye Piping using DNV &
• ASME Std. (Code check used were LFRD, Norsok &
• DNV). Work for Exhaust Stock repair for Visund drilling platform and Grane A &
• B Exhaust Stock repair. Cracks repair methology is taken from CFD Ansys Global analysis of the entire Exhaust Stock includes WHRU &
• Silencer, then locally check in FEM analysis.
Snr. Structural Engineer - Aibel - Haugesund
(2022-01 - 2022-09)
Work in brownfield project in Kristin south & Kristin capacity project (Equinor). The scope is modification of existing structure for new umbilical cable and new multiphase meter (MPM) installed in manifold area. New pipe support for 2-16" line for Mercury absorber unit (includes blast analysis) and multiple material handling installations which includes windwall installation.
Snr. Structural Engineer - Edison Design & Construction - Manila Philippines
(2021-02 - 2021-12)
Local Projects - Responsible for structural design & cadding/dwgs. Analysis are done by Staad pro globally and local check on Ansys and hand calculation with Mathcad. Implementing all design with the latest ACI (American Concrete Institute) Code, AISC (American Institute of Steel Construction). ANSI/ASCE & UBC for Environment loads. All codes implementation are within the latest appropriate International & National Standards Codes of practice &
requirements for "good engineering practice". Part of my responsibility are project execution and implementation for both commercial and industrial project meeting the company's contractual obligation and client's need and expectations on time and within resources.
Structural Engineer - Rosenberg WorleyParsons - Bangarvågsgata 15, 4077 Stavanger Norway
(2019-09 - 2020-11)
Work in Jotun A (FPSO Ship) for EPCI. using Sesam GeniE/STAAD software for global and Fatigue life extension for 25 yrs. Design involves in DNVGL Environment loads (Pitch, roll, heave/sagging & wind) with ANSYS for local check & Mathcad for hand calculation. Work also in Edvard Greig Topside Modification.
Structural Engineer - Aker – YND Maersk Inspirer - Jåttåvågveien 10, 4020 Stavanger
(2018-08 - 2019-08)
Work for Maersk Inspirer rig modification as Structural engineer & Aker BP alliance for engineering & modification/installation on offshore for Valhall, Ula and Skarv, and fabrication in Egersund and Sandnessjøen
Structural Engineer - Edison Design & Construction - Manila Philippines
(2018-01 - 2018-07)
Responsible for structural design analysis done by Staad pro globally and local check by hand calculation on Mathcad. ANSI/ASCE & UBC for Environment loads. All codes implementation are within the latest appropriate International & National Standards Codes of practice & requirements of "good engineering practice".
Specialist Engineer (Structural) - Rosenberg WorleyParsons - Norway
(2012-10 - 2015-01)
Sr. Structural Engineer - Aker Solutions AS - Norway
(2007-02 - 2012-10)
BSc - Civil Engineering - Cebu Institute of Technology University (1978-06 - 1982-03)
