Skip to main content
Ng Yong Kim

Ng Yong Kim

Singapore Citizen

Talent
SingaporeMember since May 19, 2026
Installation and CommissioningTroubleshootingMaintenanceSAPQuality ControlBudget ControlTraining
·

Hire this person

Send a job offer directly to this candidate

Installation and CommissioningTroubleshootingMaintenanceSAPQuality Control

About

Installation and Commissioning of Rig Equipment and Slurry pumps Provide recommended maintenance spares to customer. Maintenance and troubleshoot of Rig Equipment.

Experience

Field Service Engineer at HMH SINGAPORE (2022-04 – Present)

  • Installation and Commissioning of Rig Equipment and Slurry pumps
  • Provide recommended maintenance spares to customer.
  • Maintenance and troubleshoot of Rig Equipment.
  • Provide basic training for operator.
  • Collect information for business opportunity.in either spare parts or upgrades.

Field Service Engineer at HAUNI SINGAPORE (2018-12)

  • Install and Commissioning of Cigarette Maker machine on customer site.
  • Install and Commissioning of Logistic Conveyer machine on customer site.
  • Maintenance on machine, maintenance within package purchased by customer.
  • Conversion on dimension require by customer for different cigarette dimension.
  • Basic online support to customer

Field Service Engineer at GENIE AGENT SINGAPORE (2017-06)

  • Service all machinery within compound and customer site
  • Provide customer with spare part list or modification spares.
  • Provide customer with startup training.
  • Trouble shoot machinery on site, service on site if possible.
  • Update software on site
  • Installation and commissioning within Asia pacific region
  • Provide detail report for office and customer

Field Service Engineer at SEW EURODRIVE SINGAPORE (2016-06)

  • Service Industrial gearbox in Singapore and Asia pacific region
  • Installation and commissioning of Industrial gearbox in Asia pacific region
  • Trouble shoot industrial gearbox on site, service on site if possible.
  • Provide customer with spare part list or modification spares.
  • Provide customer with startup training.
  • Follow up with servicing in workshop if industrial gearbox is unable to be repair on site.
  • Provide detail report for office and customer.

Service Supervisor at FMC TECHNOLOGIES SINGAPORE (2014-10)

(retrenchment)

  • Setup Workshop in Singapore, Malaysia. Liaise with Vendor for Setting Up in Accordance with HSE Aspect.
  • Advise Customer on Technical Issue
  • Generating Quotation for Service and Spares Using SAP.
  • Schedule Service Technician to Be Deployed for Oversea Works as Well as Managing Workshop Technician.
  • Monitor Inventory Count on Spares to Ensure Sufficient Spares for Job to Be Carried Out
  • Liaise with Customer to Plan and Schedule for Jobs to Complete Within Given Lead Time.
  • Liaise with Vendor on All Consumable.
  • Budget Control on Project, Ensure No Time, Material and Human Resource Is Wasted. Reduce Costing to Minimal.
  • Frequent Meeting with Sales Manager to Generate Quarterly Service Forecast
  • Manage Technicians in Singapore, Malaysia and China.
  • Keeping Track on Invoicing and AR.
  • Ensure All Equipment Are Properly Calibrated Always.
  • Act as Lifting Supervisor During Loading and Unloading of Containers
  • Liaise with Purchaser on PR and PO, Ensure Only Purchasing from Approved Vendor
  • Plan for Container Fumigation, MPI and Load Test.
  • Ensure Technician Is Following Procedure When Doing High Pressure Testing to 15000 PSI.
  • Raise STO When Spares Is Insufficient.
  • Visit Customer Site to Visual Inspects Iron to Be Sent in Before Quotation.
  • Assist Manager on Professional Development Discussion for All Technician and Service Coordinator.

Field Service Engineer at AKER SOLUTIONS PTE LTD (2007-02)

  • Installation and Commissioning of Drill Floor Equipment on Semi - Rigs, Drill Ships and Jackups (E.G; Portable Drilling Machine, Derrick Drilling Machine, Hydraulic Rough Neck, Eagle Light, Crown Mounted Compensator, Riser Tensioner, Cat Head, Pipe Handler, Tubular Feeding Machine)
  • Trouble Shooting of Hydraulic Faults with The Equipment During Downtime Warranty
  • Mark Out Drawing If Modification Is Needed, Or When Mistake Is Spotted on Equipment, upload to Share folder.
  • Provide Training to Client During Commissioning and After Commissioning.
  • Liaise with Vendor on Fabrication, Ensuring All Measurement Are According to Drawing Specification.
  • Servicing Rig Involve (E.G; Jasper Explorer, Frontier Phoenix, Maersk, Transocean, Sea Drill, Noble bully 1 & 2)

ASSISTANT ENGINEER at HITACHI-VIA-ASIA PTE LTD (2005-02)

  • Repairing Spindle from CNC Drilling Machines.
  • Familiar with Precision Gauges usage
  • To Perform Check and Repair, Troubleshooting and Provide Report to Customer
  • Deliver Repaired Spindle to Customer Location
  • Inventory Check to Ensure All Spares Are Kept at Safe Quantity Level.
  • To Provide Training to New Technicians. Ensuring They Are Following the Correct Standard and Following Procedure / Checklist.

Quality Controller at SANDEN INTERNATION PTE LTD (2004-01)

  • Performing Inspection on Car Air-Con Compressor Using CMM Machine and All Measuring Gauge, Alias with QA to Ensure in Quality Product
  • Routine Check on Production Line Output, Ensuring All Output Is Within Tolerance.
  • Complying with ISO Standards.
  • Liaise with Vendor for Calibration of Measuring Equipment

Technician at ALSTOM POWER (2002-07)

  • Performing Overhaul on Gas Turbine Engines Inspection On Various Parts of Gas Turbine Engine, Troubleshooting, Cleaning Rotor Blade with Sandblasting Machines
  • Assemble Gas Turbine Engine with Accordance to Drawing and Specification
  • Ensuring Job Lead Time Is Met, coordinate for Spares to Be Used
  • Planning Job Schedule with Supervisor.

Credit Analysis at DINERS CLUB INTERNATIONAL (2001-06)

  • Check on applicant status with banks
  • Process card application

Education

Advanced Diploma in Shipping and Marine Offshore – Singapore Polytechnic (2016 – 2017)

Diploma in Mechanical Engineering – Singapore Polytechnic (2006 – 2010)

ITC in Mechanical Engineering Certificate – Institute of Technical Education (Tampines) (2004 – 2005)

NTC2 in Automotive Certificate – Institute of Technical Education (Balestier) (1997 – 1998)

GCE 'N' LEVEL in Certificate – Upper Serangoon Secondary (1992 – 1996)

PSLE in Certificate – Towner Primary School (1985 – 1991)

Skills

Singapore Citizen

Reviews

Related