Porter / Floor Technician
Send a job offer directly to this candidate
My main objective is being a team player who has over 20 years and great oriented experience and great leadership qualities
Porter / Floor Technician - Lockerman Enterprises - 300 West Lexington Street
(2025-03)
My duties are to clean all of the restrooms, collect all of the trash, then I would clean all of the glasses on the doors, clean and remove all of the graffiti on the outside of the property, as a floor tech my duties are to dust mop , and sweep the floors then mop and buff up the floors in the lobby and the 7th floor of the establishment
Floor Technician - Chimes Inc.
(2024-07 - 2024-10)
My duties were dust mopping different sections and checkpoints at the front of the house at the airport before I run the machine on the floors to actually be cleaned and before the end of my shift I have to clean and rinse out the machine and take it back to the machine room to be charged and be ready when I return to work on my work shift which was the 3rd shift 10pm - 6am
Porter / Floor Technician - Augsburg Senior Living - 6811 Campfield Road
(2024-04 - 2024-07)
My duties were to collect all of the trash between Monday, Wednesday and Friday, then on Tuesday and Thursday I would collect all of the recycling trash , I would start cleaning the carpets , then I would start with the floor by dust mopping and sweep the floors after that I would mop the floors the hallways and rec room, and the restrooms of the facility
Floor Technician - Johns Hopkins Main Campus - 614 North Wolfe Street
(2022-05 - 2022-12)
My duties were to get my assignment on the floors that I am assigned to , then get my equipment , then I will dust mop and sweep all of the floors, I would use the ride along machine to start cleaning the floors after that I have to buff or burnish the floors and make sure that the floors are shine, if I'm doing a project then I will start to do it by a 3 feet down with the baseboard strip, after that I will start to put the stripper down let it sit in between 10 to 12 minutes before I can strip it down, next I will use the wet vac to get the stripper off of the floors, dry up the floors and rinse mop the floor like twice before and after I will use the air blower to rinse, make sure the floor is completely dried and start to put down the coats of wax down see around 3 coats of wax and let the floors dry on its own before the end of my shift I would clean the equipment and return everything to the equipment room at the end of the day
Porter / Floor Technician - Future Care Lochearn & Future Care Charles Village - 4800 Seton Drive & 2327 North Charles Street
(2019-06 - 2024-03)
My duties were to get my assignment on the floors that I am assigned to , then get my equipment , then I will dust mop and sweep all of the floors, I would use the ride along machine to start cleaning the floors after that I have to buff or burnish the floors and make sure that the floors are shine, if I'm doing a project then I will start to do it by a 3 feet down with the baseboard strip, after that I will start to put the stripper down let it sit in between 10 to 12 minutes before I can strip it down, next I will use the wet vac to get the stripper off of the floors, dry up the floors and rinse mop the floor like twice before and after I will use the air blower to rinse, make sure the floor is completely dried and start to put down the coats of wax down see around 3 coats of wax and let the floors dry on its own before the end of my shift I would clean the equipment and return everything to the equipment room at the end of the day
Floor Technician - ABM / University of Maryland Notre Dame - 4701 North Charles Street
(2018-05 - 2019-05)
My duties were to get my assignment on the floors that I am assigned to , then get my equipment , then I will dust mop and sweep all of the floors, I would use the ride along machine to start cleaning the floors after that I have to buff or burnish the floors and make sure that the floors are shine, if I'm doing a project then I will start to do it by a 3 feet down with the baseboard strip, after that I will start to put the stripper down let it sit in between 10 to 12 minutes before I can strip it down, next I will use the wet vac to get the stripper off of the floors, dry up the floors and rinse mop the floor like twice before and after I will use the air blower to rinse, make sure the floor is completely dried and start to put down the coats of wax down see around 3 coats of wax and let the floors dry on its own before the end of my shift I would clean the equipment and return everything to the equipment room at the end of the day
Edmondson Westside High School (1995-09 - 2000-06)
