Giovanni Burgara
Lead Supervisor and Maintenance Mechanic
Hire this person
Send a job offer directly to this candidate
About
Experienced Lead Supervisor and Maintenance Mechanic with over 8 years in heavy equipment operation and scrap metal recycling. Proven ability to manage night shift operations, conduct complex machinery maintenance on shredders and loaders, and ensure efficient production flow. Certified operator for various heavy machinery, including grapple crane, Front and loader, excavator, forklift and skid steer with a strong focus on safety protocols.
Eager to leverage extensive plant operations and maintenance expertise to contribute to a dynamic team.
Experience
Heavy Equipment Operator 3 - Atlas Organics Compost - Gonzales, California
(2026-03 - 2026-09)
I feed tree, stumps and tree branches into a shredder using the excavator And separate shredded material into compost designated areas. Work on the maintenance Doppstadt Inventhor 9 shredder, Doppstadt SM-720.2k traumal screen, Doppstadt AK 640 grinder.
Lead Supervisor / Night Shift Maintenance Mechanic / Heavy Equipment Operator - Sims metal management - Redwood city
(2017-01 - 2022-12)
I worked at Sim Metal Management from 2017-2022 and played a big role in 2017-2019 running the 5000 horse power shredder. I performed all maintenance and component replacements. From 2019-2022, I was the Lead Supervisor on the night shift responsible for crew safety and plant operations. I gained extensive experience with machinery maintenance, equipment operation, and crew management across multiple systems including shredders, conveyors, material sorting, and ship loading operations.
- Managed all maintenance and operational tasks for the 5000 horsepower shredder from 2017-2019, including component replacements such as hammers, pins, disc caps, and 916 entry liners
- Executed timely replacement of grates every 5-6 months or after processing one million tons of shred, and adjusted tie rods on the front wall of the shredder
- Performed routine greasing of the feed roll and tightened super bolts on the liner post-installation of new liners
- Operated an overhead crane with a grapple attachment to safely remove obstructions from the feed chute during production
- Acquired cross-training to operate material recycling plant equipment and the Ship Loader
- Supervised the night shift crew for three years (2019-2022), ensuring the safe departure of all personnel after each production run
- Directed the loading of debris onto trucks using a front-end loader, with subsequent processing involving cement and meta-bond
- Oversaw material sorting, ensuring accurate separation of large, medium, small, and extra-small Zorba into designated bunkers, logging material processed by forklift drivers after each shift
- Responded to and reset plant alarms, actively working to maintain continuous operation throughout the night
- Replaced auger jams and repaired broken shaft connections, installing new shaft connections and bolts, and performing welding on auger flights as needed
- Serviced and maintained large machinery including Traumals, Biv-vi-tec, SGM, and Stadler shredders, and replaced grates for Stadler equipment
- Ensured continuous operation of all magnets and rectifiers throughout the night shift
- Executed repairs and replacements of conveyor belts, including patching ripped sections and installing clips or new belts
- Managed the replacement of bearings, tail pulleys, and head pulleys utilizing comalongs
- Proficiently utilized and replaced shackles, slings, keyways, motors, gearboxes, drive belts, and bushings
- Implemented a safety protocol requiring crew signature on a non-routine task form before commencing new projects
- Certified operator for front-end loader, forklift, telehandler, skid steer, man lift, and 840 Sennebogen grapple crane
- Operated a grapple crane in the receiving area to unload vehicle bodies from flatbed trucks
- Conducted pre-operation checks of all fluids and inspected for leaks before operating the crane
- Utilized a 150 front-end loader to consolidate material piles after truck dumping
- Operated the shiploader, successfully loading approximately 30,000 tons of shred onto ships
- Managed ship loading logistics, monitoring the volume of shred in each hatchet and coordinating ship movement between designated hatchets
- Liaised with longshoremen, border patrol, and the U.S. Coast Guard
Shredder operator - Schnitzer Steel & Radius Recycling - Oakland
(2022-12 - 2024-09)
I arrived at Schnitzer Steel as the shredder operator for the night shift and learned the operation of the 10,000 hp mega shredder. I also worked on the shiploader using a Gantray crane. I gained additional experience with a shear and torching area. The mega shredder featured a RTO air system, 2 z-boxes Quality shred line, and infeed systems. I performed welding on feed role teeth and changed infeed plates and rollers.
- Operated the mega shredder with 10,000 hp motor, applying knowledge from previous 5000 hp shredder experience while mastering new design specifications
- Worked on the shiploader at Schnitzer Steel using a Gantray crane with a pan for loading ships larger than previous operations
- Learned to operate the shear on the yard for cutting heavy steel into smaller pieces
- Gained experience in the torching area where heavy steel was cut into smaller pieces and added to the shred pile for shipping
- Operated the mega shredder equipped with 2 z-boxes Quality shred line and RTO air system for emissions control
- Performed maintenance on the shredder including welding teeth for the feed role
- Changed infeed plates and rollers for the infeed system
Lead Wood Murph - Guadalupe mine Recycling Waste Management - San Jose, California
(2015-02 - 2017-08)
I was in charge of the trucks dumping wood. I would give inspection and take out all non-wood materials and put them to the side so the loader could push them to the appropriate pile. I ensured everything was clean and processed through the wood chipper.
Education
high school Diploma - Mt. pleasant high school (2008-01 - 2011-12)