Skip to main content

Russell Levi

Machinist

Talent
Salem, SC 29676Member since November 19, 2026
CalipersMicrometerCNCAssemblyForkliftCNC Milling Machine
·

Hire this person

Send a job offer directly to this candidate

CalipersMicrometerCNCAssemblyForklift

About

I currently run a CNC Milling Machine. I also fill in on a few other machines when needed.

Experience

Machinist - ITT Conoflow - Westminster, SC

(2022-07)

I currently run a CNC Milling Machine. I also fill in on a few other machines when needed.

CNC Machine Operator - Eaton - Arden, NC

(2005-12 - 2022-05)

  • Create nest of parts to be run out of bars of copper, load parts, operate controls, and inspect quality parts for conformance with specifications. Inspect machined products to determine compliance with specifications and documented results.
  • Work with CNC programmers to identify and remove defective parts, reducing machine downtime and increasing productivity.
  • Comply with company ISO Quality Program and procedures, as well as safety and environmental regulations.
  • Determine tools required for each run and verified functional status.
  • Selected materials based on provided engineering requirements and end- user expectations.
  • Write simple programs for CNC machinery to perform series of accurate and consistent actions.
  • Use standard inspection tools, including calipers, tape measures, and ensure finished parts match drawings.
  • Load and unload parts, replaced tooling, adjust tools, and inspected parts according to blueprint specifications and quality document requirements. Replace tools as needed.
  • Maintained safe and clean work environment and communicated well with fellow team members and management.

Assembly/Wiring Tech/Welder/Fabricator - Eaton

(2006-12 - 2013-03)

  • Welder: I used a MIG welder to assemble cell structures. I went by B.O.M. to place correct parts in a fixture, secured clamps and welded together. Checked welds and sent to next work area.
  • Assembly/Wiring Tech: In cell area and Final Assembly, going by a bill of material and wiring schematics, I would install and wire electrical components into the cells and units. Wiring included getting proper gauge wire, cutting proper lengths, stripping ends of wire and crimping on proper terminals, label and run wire to terminal blocks. I also installed proper cables in units as well. Installed large metal side sheets on sided and backs. Installed proper metal side and back sheets with screws

CNC Machine Operator - Steelcase - Fletcher, NC

(1987-09 - 2005-10)

  • Downloaded programs into machine, interpreted specifications, and drawings to set dimensions and tolerances.
  • Loaded parts, operated controls, set offsets, and inspected quality parts for conformance with specifications.
  • Inspected machined products to determine compliance with specifications.
  • Complied with company ISO Quality Program and procedures, as well as safety and environmental regulations.
  • Set up and operated 3-axis, high-speed CNC routers. Changed heavy sharp tooling, touched off tool in machine and entered offset and position into machine tooling memory. Changed blades on tools that were compatible with stainless steel blades, and solid die tools.
  • Positioned and secured workpiece on machine bed, squaring parts between stops
  • Determined tools required for each run and verified functional status, installed additional tools needed for each program ran. Kept equipment clean, lubricated and well-maintained to prevent downtime and minimize delays.
  • Used standard inspection tools, including micrometers calipers, and tape measure.
  • Maintained safe and clean work environment and communicated well with team members and management.
  • Removed, sorted and efficiently stacked completed workpieces to keep the production line moving.
  • Loaded and unloaded parts, replaced tooling, adjusted tools, and inspected parts according to blueprint specifications and quality document requirements.

Education

High school diploma or GED (1986)

Some College Credits

Skills

Machinist

Reviews

Related