Mechanical Commissioning Engineer/Technician Mechanical Systems Engineer
Send a job offer directly to this candidate
A responsible, self-motivated and enthusiastic Mechanical Commissioning Engineer/Technician Mechanical Systems Engineer. Capable of working under own initiative or contributing to a team effort. Fabricated, installed and commissioned a wide range of mechanical, plant and process systems in the nuclear and production industries. P4 pass and SC clearance held. I have also completed various Sellafield courses which can be found on SL training records.
Mechanical Commissioning Engineer/ Permit officer - Pharmaceutical plant - Belfast
(2025-01 - 2026-02)
Mechanical Commissioning Engineer - Water Treatment Plant - Kidderminster
(2024-09 - 2024-12)
Mechanical Commissioning Engineer - Energy from waste - Glasgow
(2024-05 - 2024-09)
Mechanical Commissioning Engineer - Ministry of defence - Dijon France
(2023-01 - 2024-05)
Mechanical Commissioning Engineer - Jacobs
(2022-01 - 2022-12)
Fully SQEP Mechanical Commissioning Engineer, I have been responsible for producing Commissioning work sheets and test documentation. Commissioning cranes and various pipework, I have completed various courses including mechanical isolations and IOSH managing safely. Validating MIs and OIs I have gained valuable experience during my time at Jacobs.
Mechanical Systems Engineer - Sellafield
(2021-03 - 2022-01)
Monitor and evaluate system performance, identify issues with with systems. Support the development of system modifications. Prepare periodic system health reports. Review and approve design proposals. Lead asset improvements.
(2021-01 - 2021-03)
Working on various contracts Plumbing Pipefitting and commissioning of various domestic and industrial contracts.
Mechanical Commissioning Engineer - Cavendish Nuclear, Pile Fuel Cladding Silo, Sellafield - Sellafield
(2019-03 - 2020-12)
Responsible for the satisfactory completion of all commissioning execution records and results, controlling all raw data associated with testing. Input, production and checking of commissioning test documentation. Input, production and validation of client operator and maintenance instructions.
Approval of vendor test documentation, witnessing of vendor testing and approval of vendor test results. Interface with the client team and other project disciplines. Carry out risk assessments and produce safe systems of work.
Compilation and review of commissioning LTQR packages.
Mechanical Commissioning Technician/Engineer - Cavendish Nuclear/Balfour Beatty, Silos Maintenance Facility Project, Sellafield - Sellafield
(2018-03 - 2019-03)
Commissioning of various plant items including shield doors, elevating platforms, bogie retrieval systems, various overhead cranes and through wall drives. Commissioning and energisations of LP steam, Compressed air, Demineralised water and Potable water. Worked alongside the client team to validate Maintenance and Operating instructions for key plant operations including in cell automated equipment and mechanical handling equipment.
Demonstration, Establishing Service and Utilities and Single Item Operation commissioning tests in the absence of a lead mechanical engineer. Orchestrated multiple disciple teams while leading commissioning tests. Liaised with multiple adjoining plants to establish cross boundary agreements and agree managerial control of system boundaries. Reviewed commissioning test document results. Carrying out all test activities and maintaining test records in line with the approved test documentation and relevant commissioning management procedures.
Engineers with the raising of FOB’s, installing TCA’s and producing “red line” as built drawings and worked alongside the permit office.
Mechanical Commissioning Technician - Morgan Sindall, Fellside CHP, Sellafield - Sellafield
(2017-07 - 2018-03)
Oil and Gas. Commissioning of Fellside Boiler Park and energisations of HPNG, LPNG, Fuel oil, HP and LP steam, Compressed air, Cooling water and Demineralised water systems. Commissioning of various plant & equipment including pumps, I am SQEP and a competent nominated person on own isolations working alongside the permit office. Aspects of the job include completing test documentation including pipework pre-checks and working with EFD’s and P&ID drawings.
Mechanical/Process/HVAC Commissioning Technician - Costain Oil, Process & Gas Ltd, Evaporator D Project, Sellafield - Sellafield
(2015-08 - 2017-07)
Commissioning of LP Steam, HP Steam, Compressed Air, Demineralised water, Raw water, Nitric Acid systems. General commissioning duties on C2 supply, C2 extract, C3/C5 extract. Fully SQEP and Mechanically nominated person on own isolations, verifying isolations, and working alongside the permit office. Carrying out all test activities and maintaining test records in line with the approved test documentation and relevant commissioning management procedures.
Engineer with the raising of FOB’s, installing TCA’s and producing “red line” as built drawings.
Pipefitter - Shepley Engineering Limited, Evaporator D Project, Sellafield - Sellafield
(2014-05 - 2015-07)
Installation of stainless steel pipework, working to datum’s and punching out isometric drawings, fitting, dismantling and reinstating valves. Working alongside commissioning as support
Pipefitter - Doosan Babcock, SPP1 Project, Sellafield - Sellafield
(2012-08 - 2014-05)
Working on the SPP1 project I have gained vast experience in the installation of stainless steel pipework, commissioning of pipework and on general pipe fitting duties. Pressure testing of pipework.
Pipefitter - Redhall Nuclear, CHP Plant, Sellafield - Sellafield
(2011-07 - 2012-08)
General pipefitting fabrication on pipe spools and plant work on the CHP, Sellafield plant. Working with carbon and stainless steel. Bolting up flanges and working with valves.
Pipefitter - Redhall Engineering, Fellside CHP, Sellafield - Sellafield
(2011-01 - 2011-05)
General pipefitting duties were required on this job. Working on live plant and maintaining vales mainly on shutdown work.
Pipe Fitter - Hertel Engineering Services, Eastman Chemicals - Eastman Chemicals
(2010-11 - 2011-01)
General pipefitting duties reinstating valves and pipework working with mild steel on inept gas services.
Plumber - H2o Services - Penrith
(2010-02 - 2010-11)
General Plumbing duties. Working on live plant water mains fitting water meters and surveying jobs to be carried out.
Pipefitter/Plumber - Multiple Contracts, Self Employed - north west
(2009-08 - 2010-02)
General domestic/industrial plumbing, heating and pipefitting on various contracts throughout the north west.
Pipefitter/Plumber - Shaun Scott Plumbing and Heating
(2004-07 - 2009-08)
Various Contracts domestic/industrial plumbing, heating and pipe fitting. General Pipework fabrication and installation.
