Combo Rig Welder - Total Western Industrial (TWI)
(2024-10)
Rig Welders own their own equipment and tools. Always working unsupervised most of the time.
- Reading blueprints like take offs to elevations
- Pipe fitting own pipes and fabricating using formulas and degrees
- Using pipe bevelers 4 inches to 12 inches
- Maintaining own equipment and tools
- Welding on different sizes of pipes or structural
- Working with different metal materials like stainless, carbon, and chrome
- Using different kinds of welding rods like 6010, 7010, 8010, 6013, 7018, 7024 and stainless rods 308/316
- TIG welding rods to 70s2 or 6 and chrome rods B3 and Stainless rods 308/316
- If we didn't have a purge for stainless or Chrome pipe, we used solar flux for the root
Combo Welder single hand - Trillium Construction
(2024-08 - 2024-10)
- TIG welding open root to cap
- Helping the pipe fitters
- Fitting own pipes at times
- Reading blueprints
- Stick welding pipe supports
- Welding 2-inch to 12-inch pipe
- All welds were 100% Xray
Combo welder shipyard - Sound Resource Group (SRG)
(2024-06 - 2024-08)
- Targeting old pipe to fabricate a new spool
- Passed the 6gr test on stainless to carbon steel with 308 TIG wire
- Welding on exotic metals in the shipyard
- Welding a lot of mirror welds
- Clearance on working on US Naval Ships and submarines
- Brazing copper pipes
- Plumbing piping for toilets and showers
Combo Pipe Welder - The Industrial Company (TIC)
(2024-04 - 2024-06)
Combo welder can use multiple welding techniques to construct, maintain, and repair metals. Everything was all TIG and sometimes stick weld done too.
- Welding with Flux cored arc welding, Gas metal arc welding, Gas tungsten arc welding, and Shielded metal arc welding
- Passed welding test 2-inch monster coupon
- Reading blueprints, prepare materials, make precise measurements, and weld components in all position in a variety of space constraints
- Welding stainless, chrome P91 and carbon steel on this project
- The stainless and chrome pipes were always purged
- Did a lot of repairs after a lot of young welders that came out of welding school
- Welded on different sizes of pipes from 1 inch to 36 inch
- Helping the supervisor how to read blueprints that they didn't understand
- Did a lot of pipe supports
Combo Shipyard Welder - Sound Resource Group (SRG)
(2023-11 - 2024-04)
- Working on destroyers, carrier, and subs
- Did weld test 6gr pipe copper nickel, super duplex stainless, and carbon steel
- Structural plate test with a ceramic backing strip on vert, horz, and overhead position
- Bull rigging pipes in because there were no riggers
- Targeting pipes in the pipe shop
- Navsea test to get on navy ships
- Open root TIG pipe and capped it out with stick (7018)
Combo Rig Welder - Great Basin Industrial (GBI)
(2023-10 - 2023-11)
On this project used own welding rig truck and tools. Everything was purged because it was all stainless pipe.
- Maintained own welding machine and made sure everything was up on maintenance
- Worked and welding on Stainless pipes for a bio diesel plant
- Did own fitting pipes and got it inspected before welding on it
- Weld tested a 2-inch monster coupon pipe
- After the pipes were done, jumped on dual shield welding on a storge tank
- Finished out with welding sub arc on the horizontal seams of the tank
Combo Rig Welder - Professional Piping Systems (PPS)
(2022-09 - 2023-10)
Rig Welders own their own equipment and tools. Combo welder can use multiple welding techniques to construct, maintain, and repair metals.
- Reading blueprints like take offs to elevations
- Pipe fitting own pipes and fabricating using formulas and degrees
- Working with different metal materials like stainless, carbon, and chrome
- Using different kinds of welding rods like 6010, 7010, 8010, 6013, 7018, 7024 and stainless rods 308/316
- TIG welding rods to 70s2 or 6 and chrome rods B3 and Stainless rods 308/316
- Welding with Flux cored arc welding, Gas metal arc welding, Gas tungsten arc welding, and Shielded metal arc welding
- Passed welding test 2-inch monster coupon
- Reading blueprints, prepare materials, make precise measurements, and weld components in all position in a variety of space constraints
- Welding stainless, chrome P91 and carbon steel on this project
- If there was no purge for the pipe, we used solar flux on Stainless or chrome root
Pipe welder/Structural welder/Ironworker/Maintenance Mechanic - Mountain West Industrial (MWI)
(2022-07 - 2022-09)
- Passed all structural welding test in 2G, 3G, and 4G plate test
- Passed 6G pipe test TIG and Stick
- Working at heights
- Welding on what needs to be repaired
- Check all tools before using
- Manlift work
- Forklift work and got forklift certs
- Rigging materials and hand signaling the crane operator
Boiler Tube Welder and Boiler Tube Fitter - G H McCulloch Inc (GHM)
(2022-05 - 2022-07)
Everything was Xray tested because it's a high-pressure steam system.
- Passed heavy wall pipe test in 6G with purge because it was a chrome pipe P91 and used B3 TIG filler rod
- Tube welding with a partner that's going to be in the inside boiler walls
- Welding water walls
- Running the mill hog to bevel the tubes
- Help fitters
- Bull rigging curtains of tubes
Combo Rig Welder - Core industrial Group
(2022-03 - 2022-05)
Rig Welders own their own equipment and tools. Always working unsupervised most of the time.
- Reading blueprints like take offs to elevations
- Pipe fitting own pipes and fabricating using formulas and degrees
- Using pipe bevelers 4 inches to 12 inches
- Maintaining own equipment and tools
- Welding on different sizes of pipes or structural
- Working with different metal materials like stainless, carbon, and chrome
- Using different kinds of welding rods like 6010, 7010, 8010, 6013, 7018, 7024 and stainless rods 308/316
- TIG welding rods to 70s2 or 6 and chrome rods B3 and Stainless rods 308/316
- If we didn't have a purge for stainless or Chrome pipe, we used solar flux for the root pass
Structural Welder/Maintenance Mechanic - Western Refractory Construction (WRC)
(2022-01 - 2022-03)
- Passed all structural welding test in 2G, 3G, and 4G plate test
- Passed 6G pipe test Stick 6010 root/filler and capped 7018
- Working at heights
- Welding on what needs to be repaired
- Check all tools before using
- Manlift work
- Forklift work
- Crane operator
- Helping with rigging
Structural Welder/Ironworker/Maintenance mechanic - Rocky Mountain Industrial (RMI)
(2021-12 - 2022-01)
- Reading blueprints, prepare materials, make precise measurements, and weld components in all position in a variety of space constraints
- Passed all structural welding test in 2G, 3G, and 4G plate test
- Working at heights
- Welding on what needs to be repaired
- Forklift operator
- Manlift operator
- Weld repairs
- Structural Pipe welding (Stick)
Combo Pipe Welder - Mountain West Industrial - Oregon/California
(2021-10 - 2021-11)
- Passed TIG/STICK pipe test 6G and 5G carbon and stainless
- Passed STICK/FLUX CORE Wire structural weld plated test vert, horizontal, and overhead
- Reading pipe blueprints
- Rigging pipes in location from prints
- Forklift work and man lift work
Tank Welder/combo welder - Rocky Mountain Fabrication - Idaho/California/Utah/Nevada
(2021-05 - 2021-10)
- Welding with LN25 Flux core.45 to.52 wire dual shield 75%Co2-25%Argon
- Welding MIG/Stick/SubArc Welding
- Reading blueprints
- Welding horizontal tank with Sub Arc machine refer to 3 o'clock
- Forklift work and man lift work at all heights
- Passed all weld tests vert, horizontal, and overhead
Pipeline Welder - Northern Pipeline centuri company - Phoenix, AZ
(2021-04 - 2021-05)
- Safety first before work starts
- Used own welding machine and tools
- Tools used for the job was pipe beveler and pipe clamps
- Reading blueprints from pipes take offs to the end
- Stainless pipe was always TIG welded
Structural Welder/Millwright - Tradesmen International - Phoenix, AZ
(2021-03 - 2021-04)
- Installation, Maintenance, Repair of Industrial Machinery and Equipment
- Helping with set up, Remodel & Assembling New Conveyors
- Welding Parts together and fabricate parts
- Working at heights
- Mechanically Inclined
- General Labor, Job site clean-up moving/Relocating machinery
Shipyard Combo Welder - Sound Recourse Group Inc - Portland, OR
(2020-11 - 2021-02)
- Welding on the Naval Base in Portland Oregon
- Passed the NAVSEA test
- Passed the 6G restricted pipe test open root carbon, Stainless, Copper Nickel
- Targeted piping in shop
- Demo different sizes pipes
- Pipe fitting own pipes working on
- Reading blueprints drawings on pipes
- 10 hrs. marine OSHA card
- Working on installing cooper piping for sinks and toilets
- Did a lot of Silver Braze pipes and solder copper piping
- Passed 6G carbon stick test: 6010 root, 6010 hot pass, 7018 Filler, 7018 Cap
Combo Pipe Welder - 360 Industrial Services - Casa Grande, AZ
(2020-10 - 2020-11)
- Using Stick, MIG, TIG, and Flux Core Welding
- Weld various components in flat, vertical, or overhead positions
- Fitting own pipes from reading blueprints and find the takeoffs
- Working with all different materials of metal carbon and stainless steel
- Keep work areas clean as you go
- Working at heights everyday
- Running different sizes forklift and man lifts
- Rigging and bull rigging pipes in difficult areas
Shop Welder - Tech USA
(2020-09 - 2020-10)
- Welding MIG welding everything in shop
- Working with stainless and carbon steel
- Building high pressure vessels to regular tanks
- Reading blueprints
