Senior Safety Consultant - Contract Safety Professionals - Albuquerque, NM
(2023-06)
Work with clients at Southwest Glass and Glazing and UNMH in developing processes and procedures that effectively accomplish the goal of zero accidents.
- Work with clients in developing processes and procedures that effectively accomplish the goal of zero accidents.
- Develop relationships and rapport with clients while providing timely guidance and feedback to help them accomplish a task or solve a problem.
- Assist the client in the development of a job hazard analysis (JHA) to list daily tasks, identify potential hazards, and develop safe procedures.
- Conduct safety huddles with the team to discuss the job safety analysis (JSA).
- Act as an advocate for the client by maintaining a value of good corporate ethics and promoting safety, at every opportunity, as a core value of the organization.
- Routinely inspect projects to identify hazards, specifically Osha's Focus Four (fall protection, electrical, caught-in, and struck-by).
- Review documentation to ensure all site reports and records are complete, accurate, and submitted per established project procedures.
- Communicate all findings of inspections to leadership to keep them informed with overall compliance.
- Conduct thorough investigations of any accident or incident on site.
Senior Safety Consultant - Contact Safety Professionals - Rio Rancho, NM
(2022-06 - 2023-04)
Safety Manager for Prime Controls at Intel Rio Rancho. Ensured company Injury and Illness Prevention Program (IIPP) compliance and maintained safety standards across all project job sites.
- Ensure that the company Injury and Illness Prevention Program (IIPP) is available to all company personnel. Check to ensure there is compliance
- Continuously seek out new ways to heighten employee awareness towards safety.
- Ensure safety is maintained at all project job sites
- Conduct audits to ensure all Pre-Task Plans (PTP) and Job Hazard Analysis (JHA) forms are filled out properly
- Inform Project Managers and Superintendents of all safety violations immediately and take corrective action
- Inform the Operations Manager, Project Managers, and Superintendents of problem employees needing supervisory correction and ensure counseling is documented.
- Maintain master Safety Data Sheets (SDS) in an accessible file
- Attend all safety meetings held by the client(s)
- Speak at the company-wide mass safety meetings
- Participate in monitoring of site-specific incident prevention plans, if required by the client (e.g., Site Incident PreventionPlans [SIPP])
- Keep all company managers and foremen informed of changes and programs
- Regularly review the Corporate Environmental Health and Safety program to ensure compliance with all federal, state, and local laws, regulations, and requirements
- Work closely with safety representatives from other on-site organizations to identify hazards and determine solutions for site-wide issues
- Incorporate appropriate solutions into the corporate environmental health and safety (EHS) program
- Responsible for all other duties as assigned
- Attend Company-required training and other training required to maintain certificates, as required and approved by the Division Manager
- Conduct regular job site safety inspections and document inspection results. Assist with the correction of safety hazards identified and perform verbal and/or written coaching when required
- Conduct required safety training and safety orientations for divisions and job sites; document training and attendance for safety training records
- Supervise and mentor multiple safety representatives on a job site
- Maintain and frequently update incident logs to track incidents and injuries
- Conduct detailed incident investigation reports, including root cause analysis, and corrective measure implementation, and lead post-incident review meetings
- Ensure job sites have complete Site Specific Safety plans prepared and implemented
- Train all Prime Control personnel in all safety-related issues, procedures, and class-required certifications to meet OSHA
- Keep all training matrix records in addition to what is required by OSHA.
- Other duties, as assigned
Safety Coordinator III - Southland Industries - Tempe, AZ
(2021-11 - 2022-06)
Managed safety compliance at Tilden Data Center, overseeing OSHA regulations and company safety policies.
- Tours and inspects small or large, complex job sites to ensure compliance with company, state and federal Occupational Safety and Health Administration (OSHA) rules and regulations. Reports concerns to safety management. Ensures Enforcement of OSHA regulations and company safety policies.
- Document's safety inspections, citing dangerous areas/procedures and recommending corrective procedures. Provides recommendations for correcting non-compliance issues. Ensures cited issues are corrected within designated timeframe.
- Maintains all site required documentation related to safety issues, including accident reports, inspection reports and training logs. Uses information to track trends and injury rates. Develops current and future loss control strategies and implements corrective actions to prevent similar incidents.
- Provides emergency response to employees as needed. Participates in and documents information for the investigation of accidents and injuries and submits data to regulatory agencies as required.
- Contributes to updating training materials and coordinates and facilitates employee training as necessary.
- Directs the workflow of less-experience safety employees
- Exercises independent judgement with respect to disciplinary actions for safety violations and implementing procedures to correct similar future violations. Consults with manager on decisions that significantly impact the company.
AZ EHS Manager - MWH Constructors - Chandler, AZ
(2018-11 - 2021-11)
Managed Environmental Health and Safety program for MWH Constructors at Intel Ocotillo and Chandler Campuses.
- Maintain established EH&S program for MWH Constructors at Intel Campus in Arizona.
- Monitor contractor daily, weekly, and monthly safety checklists.
- Conduct daily, weekly, and monthly audits on contractor reports.
- Provide direct resolution for emergency safety issues.
- Counseled contractors on work safety related objectives.
- Instruct new employee safety orientation training.
- Familiar with construction activities and scheduling
- Directly responsible for enforcing safety compliance in the field through auditing and coaching.
- Accountable for incident/injury investigations as well as developing new mental models for future incident prevention.
- Trained employees on MWH policies and procedures.
- Develop, deploy, and maintain contractor safety audit tracking system.
Safety Advisor - Core Safety Group - Los Lunas, NM
(2018-08 - 2018-11)
Managed safety projects at Facebook Data Center for Hoffman Building Technologies. Provided management, coordination, and technical expertise in safety, health, and environmental compliance. Assisted in developing and administering safety policies, procedures, initiatives, and training programs.
- Work with clients in developing processes and procedures that effectively accomplish the goal of zero accidents.
- Develop relationships and rapport with clients while providing timely guidance and feedback to help them accomplish a task or solve a problem.
- Assist the client in the development of a job hazard analysis (JHA) to list daily tasks, identify potential hazards, and develop safe procedures.
- Conduct safety huddles with the team to discuss the job safety analysis (JSA).
- Act as an advocate for the client by maintaining a value of good corporate ethics and promoting safety, at every opportunity, as a core value of the organization.
- Routinely inspect projects to identify hazards, specifically Osha's Focus Four (fall protection, electrical, caught-in, and struck-by).
- Review documentation to ensure all site reports and records are complete, accurate, and submitted per established project procedures.
- Communicate all findings of inspections to leadership to keep them informed with overall compliance.
- Conduct thorough investigations of any accident or incident on site.
- Complete daily reports accurately and submit them timely.
Senior Safety Consultant - Integrated Safety Concepts - Lehi, UT
(2017-08 - 2017-11)
EHS Representative for IM Flash Demo and Tool install project. Reported to IM Flash EHS Manager. Accountable for all aspects of safety and control of the project, including tool sign offs for install and Demo scope.
- Responsible for helping oversee IM Flash Demo and Tool install project. Reported to IM Flash EHS Manager. Accountable for all aspects of safety and control of the project, including:
- Tool sign offs for install and Demo scope involved so was responsible for walking D1, D2, and D3 demo walks—design reviews to include some industrial hygiene was involved and enforcing safety compliance in the field through auditing and coaching.
- Monitor contractor daily, weekly, and monthly safety checklists.
- Conduct daily, weekly, and monthly audits on contractor reports.
- Provide direct resolution for emergency safety issues.
- Counseled contractors on work safety related objectives.
- Instruct new employee safety orientation training.
- Familiar with construction activities and scheduling
- Directly responsible for enforcing safety compliance in the field through auditing and coaching.
- Accountable for incident/injury investigations as well as developing new mental models for future incident.
Senior Safety Consultant - Integrated Safety Concepts - Sparks, NV
(2017-02 - 2017-08)
EHS Manager for Masthead Rigging and Crating at Tesla Gigafactory. Maintained Environmental Health and Safety program.
- Maintained EH&S program for Masthead Rigging and Crating
- Monitor contractor daily, weekly, and monthly safety checklists.
