Malusi Masondo

Rigger

Talent

Mzingazi Reserve Ward 14 KwaMbonambi 3915, P O Box 10276 Meerensee 3901Member since June 17, 2026

Working At HeightsConfined SpaceRiggingSlingingLiftingMechanical FittingCommunicationProblem SolvingTeamworkAttention to Detail

Send a job offer directly to this candidate

Working At HeightsConfined SpaceRiggingSlingingLifting

About

Focused: pay attention to details.

Avid learner: I am committed to improve myself. Ability to work after-hours if required.

Communication: ability to work with clients, coworkers and managers.

Problem solving: ability to evaluate situations and find effective solutions.

Teamwork: work well with others and thrive in a team environment.

Responsible: can be counted on to complete tasks assigned to me.

Rigger (With a basic Rigging & Slinging) - Genrec Engineering - JHB

(2011-02 - 2011-12)

Inspect all tools and loading equipment before and after use.
Strap small items together were applicable to load.
Loading and packing of normal and abnormal vehicles to site as a Rigger with a safety manner.
Liaise with a team leader while loading.
Maintain good house keeping.

Logistic Clerk - Genrec Engineering - JHB

(2012-01 - 2012-12)

Off Site Logistic Load Controller - Genrec Engineering - JHB

(2013-01 - 2018-02)

In-charge of loading and offloading normal and abnormal vehicles with a safety manner at all Genrec subcontractors.
Able to operate a scanner to process verification to load.
Verify, tag and load a planned vehicle to site.
I able to read structural & heavy steel drawings to enable speedy verification of steel required per items released to load.
Liaise continuously with the team and transporter while loading.
Process all completed transporter dispatched documents.

Material Controller - Genrec Engineering - Medupi Power Station

(2018-03 - 2019-12)

Receive normal and abnormal vehicles on site.
Arrange the offloading team including the riggers to offload the received vehicles.
Keeping track of inbound and outbound material.
Verify the steel to submit to the erection team according to the list received.
Allocating and issuing material.
Contact Person: Sandile Mthembu (HR)
Contact No: +27 72 136-5590

Material Controller and Timesheets Clerk - Genrec Engineering - MedupiPower Station

(2020-01 - 2021-02)

Verify attendance, hours worked and post information onto designated records for all employees.
Daily Allocation In-Site Modification: capturing all hours worked on the system.
Doing all corrections where applicable.
Contact Person: Mbali Kubheka (HR Administrator)
Contact No: (072 246-4754)

Rigger - Perkridge Design Center, Anglo American Mine - Mokopane

(2022-03 - 2023-04)

Inspect the working area and communicate with the workforce about the task to be done.
Doing the required paperwork for the task to be done in a safety manner, e.g SLAM.
Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
Transporting the tools to site in a safety manner.
Communicating with the plant operator and workforce to do lock out and signing of work permit.
Lay out the crane: inspect the crane before use and during operation.
Checking the wind speed before lifting.
Giving the clear signal to the operator when lifting and making sure that the guard rope is used.
Making sure no person under the suspended load and at dropping zone.
Contact Person: KayGee Nong (supervisor)
Contact No: (076) 782-2759

Rigger - SMIS, AngloAmerican Mine - Mogalakwena

(2023-05 - 2023-10)

Inspect the working area and communicate with the workforce about the task to be done.
Doing the required paperwork for the task to be done in a safety manner, e.g SLAM.
Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
Transporting the tools to site in a safety manner.
Communicating with the plant operator and workforce to do lock out and signing of work permit.
Lay out the crane: inspect the crane before use and during operation.
Checking the wind speed before lifting.
Giving the clear signal to the operator when lifting and making sure that the guard rope is used.
Making sure no person under the suspended load and drop zone.
Contact person: Jerry Chimika.
Contact number:(078) 087-2155.

Rigger - Burger & Co at Ivanplats Mine - Mokopane

(2023-11 - 2025-05)

Inspect the working area and communicate with the workforce about the task to be done.
Doing the required paperwork for the task to be done in a safety manner, e.g rigging study
Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
Transporting the tools to site in a safety manner.
Lay out the crane: inspect the crane before use and during operation.
Checking the wind speed before lifting.
Giving the clear signal to the operator when lifting and making sure that the tag line is used.
Making sure no person under the suspended load and drop zone.
Mechanical fitting: installation of mechanical components and equipment (valves, pumps and motors).
Putting together machine parts, installing, maintaining and repairing plants and equipment.
Crimping of hydraulic hoses by using crimping machine.
Contact person: Danie Dubert
Contact number:(082) 774-9736

Rigger - IPSCO at Mondi - Richards Bay

(2025-10 - 2025-11)

Inspect the working area with permit issuer and communicate with the workforce about the task to be done.
Doing the required paperwork for the task in a safe manner, e.g TRAC.
Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
Transporting the tools to site in a safe manner.
Lay out the crane: Inspect the crane before using and during operation.
Checking the wind speed before lifting.
Giving clear signals to the operator when lifting and making sure that the guard rope is used.
Making sure no person under the suspended load and at the dropping zone.
Contact Person: Whitey Kamteni (supervisor)
Contact No: +27 (71) 092-2668