Rigger (With a basic Rigging & Slinging) - Genrec Engineering - JHB
(2011-02 - 2011-12)
- Inspect all tools and loading equipment before and after use.
- Strap small items together were applicable to load.
- Loading and packing of normal and abnormal vehicles to site as a Rigger with a safety manner.
- Liaise with a team leader while loading.
- Maintain good house keeping.
Logistic Clerk - Genrec Engineering - JHB
(2012-01 - 2012-12)
- Processing delivery documents.
- Updating the Strumis system.
Off Site Logistic Load Controller - Genrec Engineering - JHB
(2013-01 - 2018-02)
- In-charge of loading and offloading normal and abnormal vehicles with a safety manner at all Genrec subcontractors.
- Able to operate a scanner to process verification to load.
- Verify, tag and load a planned vehicle to site.
- I able to read structural & heavy steel drawings to enable speedy verification of steel required per items released to load.
- Liaise continuously with the team and transporter while loading.
- Process all completed transporter dispatched documents.
Material Controller - Genrec Engineering - Medupi Power Station
(2018-03 - 2019-12)
- Receive normal and abnormal vehicles on site.
- Arrange the offloading team including the riggers to offload the received vehicles.
- Keeping track of inbound and outbound material.
- Verify the steel to submit to the erection team according to the list received.
- Allocating and issuing material.
- Contact Person: Sandile Mthembu (HR)
- Contact No: +27 72 136-5590
Material Controller and Timesheets Clerk - Genrec Engineering - MedupiPower Station
(2020-01 - 2021-02)
- Verify attendance, hours worked and post information onto designated records for all employees.
- Daily Allocation In-Site Modification: capturing all hours worked on the system.
- Doing all corrections where applicable.
- Contact Person: Mbali Kubheka (HR Administrator)
- Contact No: (072 246-4754)
Rigger - Perkridge Design Center, Anglo American Mine - Mokopane
(2022-03 - 2023-04)
- Inspect the working area and communicate with the workforce about the task to be done.
- Doing the required paperwork for the task to be done in a safety manner, e.g SLAM.
- Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
- Transporting the tools to site in a safety manner.
- Communicating with the plant operator and workforce to do lock out and signing of work permit.
- Lay out the crane: inspect the crane before use and during operation.
- Checking the wind speed before lifting.
- Giving the clear signal to the operator when lifting and making sure that the guard rope is used.
- Making sure no person under the suspended load and at dropping zone.
- Contact Person: KayGee Nong (supervisor)
- Contact No: (076) 782-2759
Rigger - SMIS, AngloAmerican Mine - Mogalakwena
(2023-05 - 2023-10)
- Inspect the working area and communicate with the workforce about the task to be done.
- Doing the required paperwork for the task to be done in a safety manner, e.g SLAM.
- Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
- Transporting the tools to site in a safety manner.
- Communicating with the plant operator and workforce to do lock out and signing of work permit.
- Lay out the crane: inspect the crane before use and during operation.
- Checking the wind speed before lifting.
- Giving the clear signal to the operator when lifting and making sure that the guard rope is used.
- Making sure no person under the suspended load and drop zone.
- Contact person: Jerry Chimika.
- Contact number:(078) 087-2155.
Rigger - Burger & Co at Ivanplats Mine - Mokopane
(2023-11 - 2025-05)
- Inspect the working area and communicate with the workforce about the task to be done.
- Doing the required paperwork for the task to be done in a safety manner, e.g rigging study
- Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
- Transporting the tools to site in a safety manner.
- Lay out the crane: inspect the crane before use and during operation.
- Checking the wind speed before lifting.
- Giving the clear signal to the operator when lifting and making sure that the tag line is used.
- Making sure no person under the suspended load and drop zone.
- Mechanical fitting: installation of mechanical components and equipment (valves, pumps and motors).
- Putting together machine parts, installing, maintaining and repairing plants and equipment.
- Crimping of hydraulic hoses by using crimping machine.
- Contact person: Danie Dubert
- Contact number:(082) 774-9736
Rigger - IPSCO at Mondi - Richards Bay
(2025-10 - 2025-11)
- Inspect the working area with permit issuer and communicate with the workforce about the task to be done.
- Doing the required paperwork for the task in a safe manner, e.g TRAC.
- Getting the tools from the rigger stores for the task and inspect the rigging tools before and during lifting.
- Transporting the tools to site in a safe manner.
- Lay out the crane: Inspect the crane before using and during operation.
- Checking the wind speed before lifting.
- Giving clear signals to the operator when lifting and making sure that the guard rope is used.
- Making sure no person under the suspended load and at the dropping zone.
- Contact Person: Whitey Kamteni (supervisor)
- Contact No: +27 (71) 092-2668
