Martin Khoza
Active Coded Welder | ISO 9606-1: 135 Fillet | Trade Test Passed. AT ATI | Code 30 Crane Operator
Talent
JohannesburgMember since April 20, 2026
GMAW/MIG Process mastery: short circuit & spray transfer 0.8mm - 1.2mmMaterials Knowledge: Mild steel 10mm Plate, Cast Iron and steel per ISO 9606-1ISO 9606-1 Coded MIG Fillet PB 10mmFabrication: Pump Frames, Pipe, Flange Structural steelCode Reading: read weld symbols, WPS, Fabrication drawingsMulti Process welding: TIG141, MMA111, OXY-Acetylene
·
Hire this person
Send a job offer directly to this candidate
GMAW/MIG Process mastery: short circuit & spray transfer 0.8mm - 1.2mmMaterials Knowledge: Mild steel 10mm Plate, Cast Iron and steel per ISO 9606-1ISO 9606-1 Coded MIG Fillet PB 10mmFabrication: Pump Frames, Pipe, Flange Structural steelCode Reading: read weld symbols, WPS, Fabrication drawings
About
Artisan red seal welder with 11 years experience in MIG welding and Fabrication of Pump Frames, Pipes, Flanges, Base Frames. ISO 9606-1 Fillet Coded and Code 30 overhead Crane Operator.
Trade Test
Passed at ATI 2026.
Safety
Conscious, read drawings, WPS and Producing MPI - Passing welds. Proven track record at Scamont Engineering delivers quality work to ISO Standards.
Experience
Welder | Fabricator | Code 30 Overhead Crane Operator - Scamont Engineering
(2015-01)
- Coded MIG welding of Pump Frames, Pipes, Flanges and Base Frames to ISO 9606-1 135 Fillet standards
- Fabrication & Preparation: Marking out, fit-up, tacking and assembly from Engineering drawings and WPS
- Crane Operation: Operate Code 30 overhead Crane for lifting and positioning of heavy Components - In-house certified 2024
- Quality Control: Self Inspection and ensure all welded Components Pass MPI testing
- Safety & Housekeeping: PPE Compliance
- Bore welding on Recon-Pumps & blocks for re-machining.
- Cutting torch operation and band saw operating for Cutting material.
- All Repairs on Pump, Stainless Steel blocks, Cast Iron Manifolds.
Welder - Abracon
(2013-01 - 2015-12)
- MIG welding of Arches, daily Fillet Production welding
- Grinding, Cutting and Preparation of materials.
Fettler | Code 30 Overhead Crane Operator - Weir Minerals Africa
(2010-01 - 2012-12)
- Fettling and Grinding of Cast Iron, SG Iron, High Chrome Iron castings
- Operate Code 30 overhead Crane-in house certified 2010
Education
Grade 10 - Motumi Secondary (1998-12)
Skills
Active Coded WelderISO 9606-1: 135 FilletTrade Test Passed. AT ATICode 30 Crane Operator
