Skip to main content
Sibusiso Sithole

Sibusiso Sithole

Project Engineer & Test Commissioning

Midrand, City of Johannesburg Metropolitan MunicipalityMember since September 15, 2025
Electrical & InstrumentationProject ManagementDrafting of ProceduresControlLogix/Studio 5000 Level 2: Ladder Logic ProgrammingControlLogix/Studio 5000 Level 3: Project DevelopmentControlLogix/Studio 5000 Level 4: Function Block ProgrammingFactoryTalk View SE Programming (Level 1)EtherNet/IP Configuration and Troubleshooting (incl. Stratix 5700)Powerflex Drives 750 Series Configuration and Start-upABB DCS Training FreelanceTechnical report writingQuality Management Systems ISO 9001:2015 ImplementationQuality Management Systems ISO 9001: AuditingISO 31000 Risk Management Root Cause AnalysisProduct Certification ISO 17065 Conformity AssessmentEskom Operations of High Voltage Regulation Module 1-10
·

About

I have been in the field of Electrical Engineering, Quality Assurance, Testing to different standards, LV/MV Testing for solid 10 years, my experience has grown me to become a better candidate driven to see solution. My overall experience includes LV/MV Switchgear, Electrical Plant Maintenance, Management, Customer Centricity, Auditing Quality Systems ISO 9001,SANS 17025, Testing to IEC, SANS and UL testing to IEC and local standards, Fault Finding, instrumentation PIDs, Control System, Maintenance, Root Cause Analysis, drafting of procedures working with various electrical standards. I have gained solid knowledge on Plc,HMI, Dcs and Project Management.

Electrical

Standards that I’m competent on: Switchgear, Transformer, Motors and Cables standards; SANS 60947-1-5, SANS 61439-1-2, SANS 1973-1, SANS 556-1, SANS 780, SANS 1037, SANS 1799, SANS 1804-1-5, SANS 164, SANS 182, SANS 1520, SANS 1574, SANS 60227, SANS 60884, SANS 1713, SANS 97, SANS 60799, SANS 1661, SANS 1339.

Experience

Electrical Project Engineer - RELAY SETTING SWITCHGEAR - Centurion, South Africa

(2026-03)

LV/MV Switchgear Design, Manufacturing and Testing

  • Manage multiple Tendering MV/LV switchgear projects concurrently, tracking progress from initiation to final handover.
  • Review and approve technical deliverables, including single-line diagrams, general arrangement drawings, wiring diagrams, and protection schematics.
  • Coordinate different manufacturing plants for production schedules, material deliveries, and Factory Acceptance Testing (FAT).
  • Ensure compliance with safety standards (e.g., Type testing to MV standards IEC 62271-200,100 product certification, Impulse, AC Withstand, PD, Short-Time Withstand, Short-Circuit and Temperature Rise on the Design and Internal Arc) and quality requirements.
  • Coordinate Site Acceptance Testing (SAT) and energization activities.
  • Act as the primary point of contact for clients, consultants, and internal teams, providing regular status reports tendering.
  • Manage project budgets, forecast costs, and process variations or change orders.

Electrical & Instrumentation Engineer - Saint Gobain Isover South Africa Glass Wool Plant

(2024-08 - 2026-02)

My Plant experience

  • Electric Arc Furnace operation and maintenance up 3000kW output power.
  • Fire Tube Boilers operation and maintenance up to 8bar of Steam pressure generation and accumulators.
  • Two Stage Atlas Copco Air Compressors and dryers output 6bar.
  • Chiller Water Cooling Plant.
  • 7 x 800MVA Standby Generators Weg maintenance and operating.
  • Mixer for batch mixing raw materials and conveyor systems driven by VSDs and Elevators.
  • MV Yard and Switchgear yard 22kV.
  • ABB Drives Yard up to 600kW.
  • Control System and Instrumentation Siemens 300/400/1200/1500, Step 7 and TiA Portal.
  • Rockwell RsLogix, Studio 5000, Factory Talk SE and Rockwell 750 series Drives, Connected Components, Drive Executives.
  • Implementation of safety standards Lockout...
  • Ensure smooth and efficient maintenance operation.
  • Ensure good maintenance standards to minimize down time and cost.
  • Draw up maintenance schedules for all equipment in the section and ensure that these schedules are maintained network systems, and to assist in establishing and enforcing protocol for such systems.
  • Maintain a high standard of discipline and adherence to company procedures and required safety standards.
  • Enforce corrective discipline where required.
  • Ensure that both he and his subordinates obey safety regulations and observe safety precautions as laid down in the Machinery and Occupational Safety Act.
  • Preparation of Capex applications for improvement projects.
  • Ensure a clean and organized work environment in line with 5S.
  • Ensuring contractor compliance to all SGCP standards and procedures, ISO [9001, 1400 & 1800].
  • Ensuring that proper specifications are given to such suppliers, and that work done by such is of the required standard.

Electrical & Instrumentation Engineer - Arcelor Mittal Steel South Africa - Metallurgy Plant Coke Making & Gas Plant Vanderbjilpark

(2021-03 - 2024-07)

My Plant experience March 2021 to July 2024 4years

  • Electrical/ Process Instrumentation, PLC programming and troubleshooting (Allan Bradley,
  • Manage Projects ensure contractors adhere to safety all the time, monitored project life cycle FAT, Design Concepts.
  • Maintenance Breakdown recovery, and continuous improvement of the plant control systems.
  • This covers a wide range of Field equipment, Electrical, PLC Allen Bradley, ABB 800F DCS, HMI, Scada Systems, Ethernet Protocol, Profibus, Fiber Optical, IT Automation Level 1, Level 2 IP Address Networking topology and configuration, Plant Fault Finding PLC, Rockwell Variable Speed drive ABB& Powerflex 700, 753 Rockwell and Process Instrumentation (Valves, Sensors, Pump Motors, actuators).
  • Acronis Backup systems Rs link, Factory Talk, Accert Centre, Domain Controller, Host Servers, Software updates.
  • Quality improvement drafting SOP and compliance to Electrical standards.
  • 11 kV Plant reticulation system, MCC and Switchgears maintenance.

Electro-Technical Inspector LV/MV SANS 61439 - SABS (South African Bureau of Standard)

(2018-08 - 2021-10)

My Experience

  • Preparing audits according to ISO/SANS requirements.
  • Planning, schedule and conduct audits in line with client requirements.
  • Participate in pre-audit meetings and / or complete audit preparation.
  • Conducting audits according to the SABS / ISO certification Standards.
  • Conducting audits according to certification requirements.
  • Presenting audit findings.
  • Writing and submit reports to clients.
  • Take and deliver samples to SABS labs according to specifications (when required).
  • Conducting the on-site evaluation.
  • Completing clearance on findings in the Audit Report.
  • Making recommendations for continuous improvement.
  • Analyzing customer satisfaction survey and take positive action to address any issues.

Test Engineer - CBI (Circuit Breaker Industry)

(2011-10 - 2018-07)

Switchgear Development and Testing Scope and application of IEC 60947-2 series, UL 489 series. Low Voltage Switchgear design and Development. Magnetic Flux Density verification, verification of impulse withstand voltage and verification of Assembly Drawings.

  • Rated operational voltage (Ue)
  • Rated insulation voltage (Ui)
  • Rated impulse withstand voltage (Uimp)
  • Rated uninterrupted current (In)
  • Short-circuit ratings — Icu, Ics, Icw, Icm
  • Trip characteristics and releases
  • Temperature-rise verification
  • Dielectric/insulation tests
  • Short-circuit testing
  • Mechanical and electrical endurance
  • Overcurrent and instantaneous protection
  • Verification of tripping characteristics
  • Marking and documentation
  • Type tests and routine tests

Test Engineer - SABS (South African Bureau of Standard), NETFA (National Electrical Testing Facility)

(2009-03 - 2011-10)

Testing Technical experience. Medium Voltage and High Voltage Product EVALUATION

  • Drafting technical reports.
  • Client oriented.
  • Preparation of quotation.
  • Drafting testing project schedule and discussing testing plan with Product Engineer.
  • Interpretation of standard IEC, SANS, BS, VDE.
  • Verification of temperature rise of the switchgear system, dielectric, ac withstands.
  • Provide strategic planning regarding product evaluation to High Voltage Engineering.
  • Assist in outlining the budget of the business unity.
  • Implementation of various ways of products evaluation using different specification.
  • Switchgear internal arc.
  • Short time withstand on bus bars.
  • Temperature rises on switchgear, bus bars and transformer.
  • Short-Time withstand on circuit breakers and bus bar.
  • AC Withstand.
  • Partial discharge on cables, switchgears and transformer bushings.
  • Thermal short circuit between three phase and earth.
  • Material Testing.
  • Evaluation of all types of cables low, medium voltage 3.3kV-66kV, up to high voltages 300kV including switchgears and transformers.
  • Testing of joints and termination for tendering to Eskom and Municipalities.

Education

B-Tech Degree - Electrical Engineering Power - Tshwane University of Technology

Diploma - Electrical/Electronic Engineering - Tshwane University of Technology

Masters Engineering Management Candidate - Engineering Management - Tshwane University of Technology

Master's Bridging Programme: Engineering - Engineering - Tshwane University of Technology

Matric - Math’s and Science - Bangani High School (2004)

GCC Additional Subjects - Power N5, Power N6, Mechano N5, Strength N5

Skills

Project Engineer & Test Commissioning

Reviews

Related