Sonu Choudhary

Results-driven Lifting Appointed Person with 7+ years of hands-on experience in planning, engineering, and supervising complex lifting operations across Oil & Gas, Commercial, and Industrial sectors. Specialized in developing detailed Lifting Plans, Rigging Studies, Ground Bearing Pressure Calculations, and Method Statements in compliance with LEEA, LOLER, PUWER standards. Committed to zero-incident lifting operations through rigorous risk assessment and team coordination.

Lifting Appointed Person (APLO) at Falcon Middle East Contracting and General Maintenance (2025-12-08 – Present)

• Conducted detailed site survey and inspection assessed ground conditions, crane positioning, load locations, proximity hazards, and access routes for all planned lifting operations.
• Prepared complete Lifting Plan for loading/unloading and Installation of Unit.
• Produced detailed AutoCAD Lifting Drawings for each individual load — Plan View (showing crane position, outrigger spread, operating radius, Side Elevation (showing boom height, clearances), and Rigging Arrangement Diagrams.
• Performed crane utilization calculations using load charts selected boom length at required radius, all lifts within utilization limit as per requirements.
• Calculated sling tensions, WLL requirements, and utilization ratios for all lifting accessories — Webbing Slings, Chain Slings, Bow Shackles, and Spreader Beam — confirmed all within safe working limits.
• Completed Ground Bearing Pressure (GBP) calculations — Max outrigger load, pressure confirmed within allowable GBP limit.
• Performed pre-use inspection of all lifting accessories on site — Chain Slings, Bow Shackles, Webbing Slings all certificates confirmed valid.
• Verified anemometer calibration and confirmed maximum wind speed limit of crane operations on site.
• Prepared complete documentation package (Method Statement, Risk Assessment, Lift Categorization Flow Chart) classified Non-Routine Complicated lift.
• Coordinating and briefing crane operator, riggers, banksmen, and signalmen in preparation for site lifting operations upon TAQA approval.
• Developing and authorizing comprehensive lifting plans, method statements, and risk assessments for all project lifting activities.
• Ensuring strict compliance with LEEA, international standards, and TAQA client-specific safety protocols (LOLER).
• Conducting feasibility studies, site inspections, and ground bearing pressure calculations to determine optimal crane positions and equipment selection.
• Performing detailed lift engineering calculations, including load charts, center of gravity (CoG), and rigging configuration analysis using AutoCAD and engineering principles.
• Ensuring all lifting equipment are certified, inspected, and fit-for-purpose.
• Liaising with Lead Lifting Engineer and engineering teams to integrate lifting plans with construction schedules and mechanical installation procedures.
• Overseeing subcontractor lifting plans, verifying certifications, and ensuring adherence to approved methodologies.

Lifting Engineer at Spider Plus Construction Equipment Trading LLC (2024-10-22 – 2025-11-11)

• Personally attended and supervised all lifting operations on-site across multiple commercial, industrial, and residential project sites in UAE — directly present during each lift overseeing crane operators, riggers, and banksmen.
• Conducted on-site pre-use inspection of all lifting equipment and accessories before each operation — Spider Cranes, Mobile Cranes, Glass Lifters, Tracked Carriers, Slings, Shackles, Spreader Bars, and Vacuum Lifters.
• Carried out physical site surveys at each project location assessed ground bearing capacity, crane access routes, overhead obstructions, underground utilities, and proximity hazards before crane positioning.
• Conducted on-site pre-lift briefings and Toolbox Talks (TBT) before each operation confirmed all personnel understood lift plan, hand signals, exclusion zones, and emergency procedures.
• Supervised crane operators on-site during all lifting operations provided real-time guidance on boom angle, radius, and load positioning to ensure safe and accurate placement.
• Performed on-site load weight verification and Centre of Gravity (CoG) checks before slinging — confirmed rigging configuration matched approved lifting plan before each lift.
• Produced detailed AutoCAD Lifting Drawings for every lift Plan View, Side Elevation, Rigging Arrangement Diagrams, and Sling Geometry drawings for each individual load.
• Performed load calculations, center of gravity (CoG) analysis, and point load assessments using CAD drawings and technical documents.
• Reviewed and approved lifting accessories, slings and vacuum lifters in accordance with load and operational requirements.
• Ensured all lifting gear certified and maintained in accordance with statutory requirements — zero non-compliance incidents during entire tenure.
• Trained and guided site teams on lifting safety protocols and proper rigging techniques.

Lifting Planner at Tekfen Construction Co. Inc (2022-12-01 – 2024-09-18)

• Physically present on-site during all Critical, Heavy, and medium lifts at NFE North Field East Onshore Facilities EPC-1 directly supervised lifting operations from planning through execution on one of Qatar's largest LNG projects.
• Conducted on-site crane positioning checks before each major lift physically verified crane capacities, boom elevations, swing clearances, and transport route clearances on site.
• Supervised on-site Loading, Offloading, and Shifting activities physically ensured all materials were securely fastened, lashed, and safe for transport zero damage incidents during entire project.
• Performed on-site monitoring of all lifting gear physically checked slings, shackles, crane certificates, and rigger qualifications on site before commencement of each lift.
• Produced detailed AutoCAD Lifting Plan Drawings for all Critical and Heavy lifts Plan Views, Side Elevations, Rigging Study Drawings, Tandem Lift Drawings.
• Drew installation sequence drawings for heavy mechanical and electrical equipment step-by-step visual guides showing rigging changes, load rotations, and final placement with dimensions confirmed on site.
• Oversaw all sub-contractor lifting operations on-site — physically verified rigging configurations, outrigger placements, and crane positioning matched approved lifting plans.
• Conducted on-site risk assessments and toolbox talks before each lift briefed crane operators, riggers, and banksmen on lift sequence, hazards, and emergency procedures.
• Reviewed and approved all sub-contract lifting and rigging plans including verifications of rigging certifications, ground bearing calculations, crane lifting capabilities, and clearances.
• Completed feasibility studies, checking crane capacities, locations, and elevations for clashes and transport route clearances.

Design Engineer Cum Lifting Supervisor at Starcore Ltd (2017-10-01 – 2022-11-10)

• Served as primary on-site Lifting Supervisor for 5 years — physically directed and supervised all crane operators, riggers, and signalmen during material slinging, shifting, and positioning across Commercial, Industrial, and Residential projects.
• Conducted daily on-site pre-lift inspections — physically checked cranes, slings, shackles, and all lifting gear before daily operations commenced — maintained zero-incident performance throughout 5-year tenure.
• Performed on-site Toolbox Talks (TBT) and pre-lift briefings with all site personnel — confirmed lift plans, hand signals, exclusion zones, and emergency response procedures.
• Physically verified ground conditions, load weights, and Centre of Gravity on-site before each lift — confirmed actual conditions matched approved lifting plan before authorizing commencement.
• Supervised on-site rigging activities — physically monitored correct sling attachment, load balance, and rigging configuration before each lift — ensured compliance with approved method statements.
• Prepared all Lifting Plan Drawings from scratch using AutoCAD — Plan Views, Side Elevations, Rigging Arrangement Drawings, and Load Path Diagrams based on actual field measurements taken on site.
• Maintained complete drawing register for all lifting operations — revision-controlled and filed with corresponding lifting plan documentation for client review.
• Prepared and reviewed lifting designs, drawings, and lifting plans compliant with international standards.
• Ensured all activities followed design specs, project schedules, and safety regulations with zero-incident performance.

B. Tech in Mechanical Engineering – Calcutta Institute of Technology (2013 – 2017)