Saurabh Ladia
Engine Performance and Calibration Engineer (Consultant)
Hire this person
Send a job offer directly to this candidate
About
Masters degree holder with about 7 years of experience in engine and aftertreatment testing, calibration, analysis, controls modelling and simulation
Experience
Engine Performance and Calibration Engineer (Consultant) - Perkins Engines Company Limited - Peterborough, United Kingdom
(2024-01 - 2024-03)
- Worked on the 900 series (2.8 Liters and 3.6 Liters) diesel engine performance and emissions calibration using Caterpillar Gryphon software for engine data analysis.
- Tested and studied the effect of lower diesel cetane number on increased hydrocarbon emissions w.r.t engine load/torque
- Performed EGR swing test i.e. plotted NOx + HC vs EGR valve position for different values of EGR valve learn position
Engine Aftertreatment Analysis Engineer (Consultant) - Aurobay (Powertrain Engineering Sweden AB) - Gothenburg, Sweden
(2022-01 - 2022-06)
- Worked on the Volvo Cars VEP4 2.0 Liter 4 Cylinder gasoline engine aftertreatment system for the China 7 emissions legislation.
- Responsible for engine aftertreatment testing on engine and vehicle dynamometer and data analysis using ETAS INCA, ETAS MDA, AVL Concerto, DTECS (Volvo Cars internal software tool), A&D Orion and Automatic Plotting Program.
- Tested and evaluated different three way catalytic converter canning designs in the engine test cell using bang-bang target lambda control by doing poisoning (thermal deactivation), regeneration, US06, steady state and SVRLSC (Switch Voltage Rear Lambda Software Calibration) tests for tailpipe values and conversion efficiencies of NOx, CO and THC emissions.
- Tested and evaluated a benchmark catalytic converter system for tailpipe emissions on the vehicle chassis dyno test cell.
Performance and Calibration Engineer (Consultant) - Volvo Group Trucks Technology - Gothenburg, Sweden
(2021-08 - 2021-11)
- Performed 13 liter turbo compounded heavy duty diesel engine combustion calibration
- Performed Simulation, modelling and engine calibration maps optimization in ETAS ASCMO
- Performed Engine data analysis in SAKURA (Volvo internal engine data analysis software tool)
Senior Manager – Performance & Emissions Calibration (Full-Time) - Tata Motors Limited - Pune, Maharashtra, India
(2018-02 - 2019-03)
- Delivered engine performance and emissions calibration using AVL Puma, Delphi Visu, AVL Indicom, AVL Cameo for Euro 6 emissions regulations on the 2.2 liter diesel engine
- Optimized DPF inlet temperature by calibrating post fuel injection 1 & 2 timing and quantity
- Calibrated EGR % for different engine speed and load points by performing EGR swing test i.e. varying EGR % at different engine speed and load points to optimize EGR % for least NOx and smoke
- Calibrated fuel injection timing for different engine speed and load points by performing fuel injection timing swing test i.e. varying fuel injection timing at different engine speed and load points to optimize fuel injection timing for maximum brake torque
- Finalized EGR cooler supplier by optimizing EGR cooler efficiency
- Optimized emissions at different modal points in the driving cycle
- Optimized engine friction torque by motoring on the transient engine test bench
Development Engineer (Consultant) - Caterpillar India Private Limited - Chennai, Tamil Nadu, India
(2015-07 - 2017-02)
- Worked on engine diagnostics on Perkins CompactX (Synchro/900 series), 4000 series and Vista (1200 series) engines and vehicle diagnostics on Optimus 773E and 777E off-highway truck, articulated truck and hydraulic excavator programs
- Calibrated engine diagnostics system including the Programmable Monitoring System (PMS) using vCDM (Vector Calibration Data Manager), Forcast (Flash Organization and Calibration Studio), System Architect and Vector CANape software tools
- Performed engine and vehicle failure mode analysis, fault root cause analysis and design diagnostics
Development Engineer (Consultant) - Segula Technologies Limited - Essex, United Kingdom
(2013-05 - 2014-03)
- Performed diesel engine air path and transient OBD calibration of the DW10F diesel engine using ATI Vision and Bosch software strategy guides
- Calibrated the turbo charger, EGR and throttle valves first learning OBD faults and turbo charger valve stuck open and stuck closed faults
- Coordinated the calibration updates with Bosch, vehicle specific calibration integration and airpath calibration teams
- Performed building and parameterization/calibration of the 1.6 liter ecoboost gasoline engine models in Simulink for testing on a dSPACE HiL rig with interaction with Aachen advanced research division and validated the Simulink model with actual engine measurements
Project Engineer (Full-Time) - FEV, Inc. - Auburn Hills, MI, USA
(2012-05 - 2012-07)
- Developed documentation for On Board Diagnostics monitors for lambda sensor rationality and others using ECU software strategy documentation, customer requirements and CARB OBD requirements
- Developed documentation for a diesel oxidation catalyst model made in Simulink and also a test plan for collecting engine data for testing the DOC model
Test Engineer (Consultant) - Electro-Motive Diesel Inc. - La Grange, IL, USA
(2012-01 - 2012-04)
- Performed testing of engine exhaust aftertreatment systems i.e. DOC, DPF and SCR for Tier 4 emission regulations in locomotives, test cells and emissions lab including data acquisition, analysis and troubleshooting using ATI Vision, MATLAB, AVL SESAM FTIR bench and Horiba emissions bench
Product Engineer (Consultant) - John Deere Power Systems - Cedar Falls, IA, USA
(2011-06 - 2011-10)
- Responsible for handling thermal aging of various exhaust aftertreatment components including diesel oxidation catalyst, diesel particulate filter and selective catalytic reduction & ash loading of diesel particulate filter in the engine test cells
- Performed data analysis & solved issues in the engine test cell data using MATLAB & Diadem
Project Engineer - Diesel Aftertreatment (Consultant) - Navistar Inc. - Melrose Park, IL, USA
(2010-11 - 2011-06)
- Worked on the Exhaust Gas NOx Reduction (EGNR) (solid SCR) aftertreatment system
- Conducted testing and collected and managed data regarding the performance of the aftertreatment system in the vehicles using ETAS INCA software
- Performed data analysis on the data collected in the vehicles using ETAS MDA and e-view software (Navistar internal data analysis software tool)
- Performed troubleshooting of the aftertreatment system in the vehicles
Graduate Research Assistant - Michigan Technological University - Houghton, MI, USA
(2009-01 - 2010-05)
- Worked on Application of Stochastic Log-Normal Combustion Knock Analysis to Data from a Ford 5.4L V-8 4-Stroke SI Engine
- Used values of stored 1, 5, 25, 50, 95 and 99th percentile accelerometer/pressure/ion intensities to fit them to the log-normal cumulative density function parameters of mean and standard deviation
- Wrote a program in MATLAB to determine trends using 2-D plots and 3-D surface plots and 2-D constant pdf contour plots of the log-normal probability density function versus accelerometer/pressure/ion intensity and spark advance over the engine speed range of 1000-5000 rpm for the 2nd and 7th cylinders with superimposed lines of constant percentile accelerometer/pressure/ion intensity of 1, 5, 25, 50, 95 and 99th percentile
- Using a stochastic log-normal knock model in Simulink, determined the transient response of the estimated log-normal mean (µ) and standard deviation(s), 95th and 25th percentile accelerometer intensities and the knock factor (95th by 25th percentile accelerometer intensity) over a range of engine speeds for different cylinders
Engineering Intern - Delphi Powertrain Systems - Auburn Hills, MI, USA
(2008-09 - 2008-12)
- Worked in the gas engine management systems department
- Involved in the Modularization and commonization of the TORQ1 / TORQ3 subsystems in the areas of Tip-in-bump torque control and driver desired torque calculation
- Executed test plans, developing documentation, and modeling the subsystem in these areas, in addition to supporting other small verification activities
- Worked on the MT60 a
Education
Master of Science - Mechanical Engineering - Michigan Technological University (MTU) (2010-05)
Bachelor of Technology - Mechanical and Automation Engineering - Amity University (AUUP) (2007-05)
