Dexter Q. Arong
Dimensional Surveyor
Sewa orang ini
Hantar tawaran kerja terus kepada calon ini
Pengalaman
Lead Surveyor - Fair and Square Conglomerate Group of Company - Cuta Batangas City
(2025-02 - 2026-01)
Surveyor - AG&P Atlantic Gulf & Pacific Company of Manila Inc - Alabang, Muntinlupa City, Philippines
(2023-07 - 2024-08)
- Studying the scope of the projects and preparation of the procedure for inspection
- Conduct survey and alignment check by Total Station of structural and piping jobs carried out in the yard during various stage of fabrication and erection
- Prepare for the alignment and survey check data carried out
- Compiles documents and reports in accordance with inspection and test plan
Dimensional Surveyor - Atlantic Gulf & Pacific Company of Manila Inc. - Alabang, Muntinlupa City, Philippines
(2020-09 - 2021-05)
Project: Clean Fuel Thai Oil Project
- Established control points, marking layouts and coordinates with the consultants in joint checking
- Inspect with Total Station to know the standard length of the items to be measure and verify the measurement against tapeline and to eliminate / reducing possible errors
- Able to interpret steel construction and fabrication drawings
- Setting out, as built before and after concrete pouring for structural and steel works
- Execute drawing analysis and interpretation (Structural, Piping, Vessel, & Equipment)
- Record all the necessary survey data
- Assist the Quality Control Personnel for the verification that all dimensions are within tolerance limit base on the dimensional requirements during installation process
- Report the OoT (Out of tolerance as per ITP)
Dimensional Surveyor - Atlantic Gulf & Pacific Company of Manila Inc. - San Roque, Bauan, Batangas
(2013-08 - 2014-04)
Project: HRSGG Heat Recovery Steam Gas Generator - BHPI Bobcock Hitachi Philippine Incorporated
- Established control points, marking layouts and coordinates with the consultants in joint checking
- Inspect with Total Station to know the standard length of the items to be measure and verify the measurement against tapeline and to eliminate / reducing possible errors
- Able to interpret steel construction and fabrication drawings
- Setting out, as built before and after concrete pouring for structural and steel works
- Execute drawing analysis and interpretation (Structural, Piping & Equipment)
- Record all the necessary survey data
- Assist the Quality Control Personnel for the verification that all dimensions are within tolerance limit base on the dimensional requirements during installation process
Dimensional Assistant - Atlantic Gulf & Pacific Company of Manila Inc. - San Roque, Bauan, Batangas
(2012-01 - 2013-05)
Project: Foster Wheeler BP Whitening
- Set up equipment and assist with the recording of measurement
- Assisting with measuring of distance, angles and variation in structure and piping works lay out
- Maintaining and transporting the survey equipment safely
- Placing pegs and surveys markers onto structure columns, beams, girders and piping
- Recording measurement manually or electronic equipment
- Clearing area to be surveyed of debris and obstruction on targets
Surveyor - Le Bros Construction - Los Angeles St. Brookside Hills Subd., Cainta, Rizal
(2023-09 - 2023-02)
- Lay out and establish design elevation for cut and fill
- Ask the operator and foreman for which location will be start for clearing and grabbing of soil
- Layout and marking of the road together and locate the tree to be cut
- Excavate / Cut the road layout to meet the design elevation for sub-base preparation
- Monitor the compaction before laying of sub-base
- Layout of sewer pipe and establish invert elevation for excavation
- Layout of pipe (RCP) for excavation and monitor of compaction before laying of RCP pipe also ask the workers to put collar for all joints
- Layout the PCCP pipe road centerline so that the workers can run their concrete formworks
Land Development Foreman - Hg3 Construction - 3368 Harvard St., Brgy Pinagkaisahan, Makati City
(2021-11 - 2022-07)
- Discuss with the Project Engineer for whatever priority to construct or prepare
- After discussion with the Engineer, I will arrange all the machinery operators prior for location of work to deploy
- Monitor the cut and fill of the backhoe and bulldozer also the hauling and tell them where to dump the cut soil
- Lay out the road for road tracing to cut and fill
- Layout the RCP and assigned the backhoe operator to excavate and monitoring for slope design
- After laying of RCP ask the worker to do the collar for the joint of RCP. Check the slope the ask the excavator to backfill the RCP laydown
- Assign the grader operator on which road require to grade and level the cutting soil or backfilling of sub-base / base course
- Layout of manhole drainage and establish the design elevation
- Layout the road centerline for their installation of formworks and establish the design road finish level
- Basic knowledge to operate of Machinery vehicle such as pay loader, backhoe & Bomag compactor
Construction Staff / Surveyor - TBTC Construction Engineering SDN BHD - Jalan Melaka Raya 30, Taman Melaka Raya 75000 Melaka, Malaysia
(2014-04 - 2019-04)
- Perform and check all surveying work on Construction site
- Setting out as built before and after concrete pouring for structural and steel works
- Monitored compliance with all safety guidelines and policies
- Coordinates with workers to ensure to meet the weekly goals and produce status reports
- Coordinates with subcontractor to ensure quality workmanship in accordance with the plans and client needs
- Established require slab elevation for installation of formworks and concreting
Pendidikan
Undergrad - Int'l Hospitality Management - Batangas State University (2009)
High School - Golden Gate College HS Department (2004 - 2009)
Elementary - Batangas City East School (1997 - 2003)