Louie A. Saltivan

OFF SHORE AND PIPELINE PROJECT

TIG WELDER CS/SS - PT SAIPEM INDONESIA

(2023-10 - 2024-12)

OFF SHORE AND PIPELINE PROJECT

• Welding Cladding duplex, CS/SS 316-304-308 CS/SS/ALLDY P91 P95 P5 P7 DUPLEX/ SUPER DUPLEX/ 6 GR FULLPEN/ INCONEL 6625(NGR) NICR 22 MO9Nb)/ INCONEL. CLADDING 6222( MO/ VicaMo-3) COPPER NICKEL.
• Heavy Fabrication for Offshore facilities.
• Performed a variety of Welding on pressure process piping and structures.
• Working at Pipe and field fabrication shop.
• Full welding of different size and positioning of pipe until commissioning of this unit.
• Responsible for work preparation to make sure that all welding joints are clean.

GTAW/SMAW WELDER - DAEWOO ENG. & CONSTRUCTION

(2021-05 - 2022-03)

INDORAMA FERTILIZER NIGERIA

• Responsible to follow safety rules & regulations
• Assign fabrication shop assists and full welding carbon steel pipe 2,4,6,8,10,12 inch diameter using GTAW/SMAW process bu using E-7016 & ER70S-3 with radio-graphic test
• Selected materials and equipment require test tig welding.

GTAW / SMAW WELDER - DAEAH E&C Co. LTD

(2019-06 - 2019-11)

UTCC POWER PLANT UZBEKISTAN

• As a Welder I Assigned Fabrication Shop Assists and Full Welding Pipe Carbon Steel, Stainless Steel Pipe 2, 4, 6, 8, 10, 12 inch diameter.
• Before I start working I Familiarize the work site.
• Selected Materials and Equipment require for Tig Welding
• Clamped measured and aligned metal parts prior to Welding
• Coordinate and support structural or piping works to ensure to meet target diam/ inch
• Perform housekeeping and observe safety

GTAW/SMAW WELDER - DAEAH E&C Co. LTD

(2018-03 - 2018-11)

RUWAIS REFINERY WEST RESTORATION ABUDHABI

• As a Welder I Assigned Fabrication Shop Assists and Full Welding Pipe Carbon Steel, Stainless Steel Pipe 2,4,6,8,10,12 inch diameter. Backing 99.99% Argon Stainless Steel Pipe
• I Assigned Job Site pipe rack 1620 area I weld carbon steel, Stainless steel pipe with 100% xray.
• Before I start working I Familiarize the work site.
• cleaning grinding or power brushing of butt joint before start welding.
• Coordinate and support structural or piping works to ensure to meet target diam/inch
• Perform housekeeping and observe safety

GTAW /SMAW WELDER - SAIPEM

(2016-09 - 2017-06)

KAMBOO TOTAL ANGOLA SAIPEM KARIMUN INDONESIA

• Set up to welding equipment to ensure ground and clamps are in proper and good condition before start welding works
• Cleaning of Built Joints before welding
• Welding of Copper Nickel Pipe 2", 4", 6", 10", 12", diameter
• Using GTAW Welding Process and using ERCUNI70 filler wire
• Welding of Stainless Steel Pipe 2", 4", 6", 10", 12", diameter
• Using GTAW Welding process and using ER70S-6 filler wire/ Electrode E7018
• Perform housekeeping and safety practices

GTAW/SMAW Welder - DSME/AG&P

(2015-07 - 2016-03)

MAFUMEIRA SUL OFFSHORE PROJECT CHEVRON ANGOLA

• As a combination welder I was assigned in MAFUMEIRA SUL PLATFORM PROJECT.
• Prepare and set up of welding machine and equipment
• Perform cleaning thru grinding or power brushing of Butt Joint before start welding
• Welding of pipe 6", 8", and 12", diameter using GTAW/SMAW welding process and pass the x-ray test
• Full welding pipe to pipe carbon steel, stainless steel, Duplex steel using filler wire ER70S-6, ER316L, ER90S-B9 ER2209.

GTAW/SMAW Welder - DAEWOO E&C Co. LTD

(2013-11 - 2014-11)

SADARA CHEMICAL PROJECT JURAIL K.S.A

• Full welding carbon steel, stainless steel GTAW/SMAW Process using filler wire. ER70S-6, ER308L, ER316L.Electrode using E7018,E308L,E316L
• Ensure clean joint to obtain smooth look
• Monitor all welding process ensure absence of any shrinkage and distortion of materials
• Analyze speed and length of welding arc For all welding process
• Perform housekeeping and observe safety.

GTAW/SMAW Welder - SAMSUNG C&T/GUSAT CONSTRACTION LTD

(2012-08 - 2013-08)

(IPP) INDEPENDENT POWER PLANT PROJECT QUARAYYAH K.S.A

• As a Welder I Assigned Fabrication Shop Assists and Full Welding Pipe Carbon Steel, Stainless Steel Pipe 2,4,6,8,10,12 inch diameter. Backing 99.99% Argon Stainless Steel Pipe
• Perform full welding kinds of materials such as carbon steel, stainless steel, and alloy steel using GTAW/SMAW process
• Assign in steam turbine in pipe rack for GTAW/SMAW Process with a 100% RT
• Perform other related welding works as required by immediate head
• Always followed safety standard in welding works

GTAW/SMAW WELDER - DAEWOO E&C CO. LTD

(2011-05 - 2012-05)

ALGERIA OMAN FERTILIZER PROJECT

• Assign in fabrication for the production welding of all kinds of pressurized pipe such as low temperature carbon steel (L.T.C.S) carbon steel (CS) stainless steel (SS) with 100% x-ray
• Assign in pipe rack in the tank area full welding of all fit-up joint as required by welding foreman
• Responsible for full welding of all tie – in joint especially during plant shutdown
• Coordinate and support structural or piping works to ensure to meet target diam/inch
• Follow to all safety standard in welding works.

GTAW/SMAW WELDER - DOWNER EDI ENGINEERING

(2010-06 - 2010-12)

SINGAPORE PARALLEL TRAIN EXXON MOBIL PROJECT

• As a combination welder I was assigned at Singapore Parallel Train Exxon Mobil Project Chemical Plant full welding carbon steel pipe material. Process GTAW/SMAW using filler wire ER70S-3/ E7018.
• Monitor all welding process and ensure absence of any shrinkage and distortion of material.
• Follow Safety Standard in Welding Work.

GTAW/SMAW WELDER - SAMSUNG CORPORATION

(2008-06 - 2009-06)

BOROUGE 2 OCU PROJECT RUWAIS ABU DHABI UAE

• Full welding butt joint pipe encore steel, stainless steel and carbon steel process GTAW/SMAW Diameter 2", 4", 6", and 12", using filler wire ERNICR-3 ER 308-L, ER70S-6. ELECTRODE: E308L, E7018
• Assist in full welding of piping on fabrication shop and support the 36" branch connecting to 56" header stainless steel material complete full welding pipe.
• Perform cleaning thru grinding or power brushing of butt joint before start welding.
• Perform housekeeping and safety practices

GTAW/SMAW WELDER - DAELIM/ WOOLIM JALKEH ENG& CON. CO. LTD

(2007-11 - 2008-03)

PETROCHEMICAL COMPLEX 300KT/BANDARIMAN, IRAN

• Assign in fabrication shop full welding stainless pipe butt joint diameter 2", 4", 6", 8", 12", 20', using GTAW process and 3 above using GTAW/SMAW process for carbon steel and alloy steel material.
• Assign in pipe rack for the full welding of all fit- up butt joint.
• Ensure clean joint to obtain smooth look
• Maintain disc grinder and perform all cleaning and grinding of metal
• Perform housekeeping and observe safety

GTAW/SMAW WELDER - DOOSAN HEAVY & CONSTRUCTION

(2007-03 - 2007-08)

TAWEELAH NEW B EXTENSION PROJECT ABUDHABI UAE

• As a welder I was assign boiler panel wall tubes I weld 2" inch diameter alloy steel process all GTAW filler wire ER90S-B3
• Full welding heavy wall pipe P91 14" diameter ER90S B9. Electrode E9015 B9 with 100% x-ray
• Perform other related as a required by welding foreman
• Always think safety all the time

GTAW/SMAW WELDER - GAMA INDUSTRIALS

(2006-02 - 2006-11)

SAKHALIN II LNG / OET PROJECT RUSSIA

• Assign in fabrication shop full welding stainless pipe butt joint diameter 2", 4", 6", 8", 12", 20', using GTAW process and 3 above

High School Graduate

NC II - Gas Metal Arc Welding (GMAW) - Technical Education Skills Development Authority

NC II - Gas Tungsten Arc Welding (GTAW) - Technical Education Skills Development Authority