Skip to main content
Mahesh Bharati

Mahesh Bharati

PhD Candidate, Mechanical Engineering, IIT Patna

Talent
SingaporeMember since June 27, 2026
SEMHydrogen EmbrittlementFSWProduct DevelopmentANSYSFatigue and FractureFailure analysisFEADesign of experimentSteel wire rope
·

Hire this person

Send a job offer directly to this candidate

SEMHydrogen EmbrittlementFSWProduct DevelopmentANSYS

About

Mechanical Engineering PhD candidate with experience in research, product development and manufacturing processes. Specialised in analysing the effect of hydrogen on the mechanical properties of metals, with knowledge in domains including fatigue and fracture mechanics, damage tolerance approach and FE modelling. Skilled in data-driven analysis and experimental validation. Aiming to deliver reliable and cost-effective solutions to engineering challenges.

Experience

PhD Research Fellow at IIT Patna (2021-07 – Present):

Conducted a study to evaluate hydrogen-induced degradation in the structural integrity of 9Cr-1Mo steel using mechanical characterisation experiments and analytical tools.

  • Fabricated setup for electrochemical hydrogen charging and hydrogen content measurement.
  • Upgraded elevated-temperature testing setup by integrating a water-cooling system.
  • Performed fatigue crack growth rate test to estimate remaining life in the presence of a crack, obtain fracture toughness and assess fatigue life using low and high-cycle fatigue experiments after hydrogen-charging.
  • Systematically evaluated the hydrogen embrittlement susceptibility of 9Cr-1Mo steel and pioneered an experimental method to account for the macroscopic deformation through tensile loading at different strain rates (10-1-10-6s-1).
  • Utilised DIC method to capture local strain evolution and successfully captured the role of hydrogen in the initiation of multiple strain localisation sites.
  • Applied Taguchi analysis to demonstrate that strain rate dominates embrittling of 9Cr-1Mo steel due to hydrogen.
  • Determined the governing hydrogen-assisted damage mechanisms through fractographic analysis using SEM images and correlated with mechanical properties degradation.
  • 73% reduction in the ductility and nearly 3 times increase in crack growth rate in the hydrogen-charged 9Cr-1Mo steel was correlated to hydrogen-enhanced localised plasticity and decohesion mechanism.
  • 33.33% and 22.58% decrease in the fatigue limit due to hydrogen was attributed to HELP and HEDE mechanisms at ambient temperature and dominant high-temperature hydrogen attack at elevated temperature, respectively.
  • Maintained and troubleshot critical lab equipment for efficient project execution, and concurrently managed the procurement of mechanical components, consumables, and instrumentation.
  • Strengthened technical communication, problem-solving, and demonstrated leadership, mentoring and project coordination by supervising 2 undergraduates and 2 master's students for their final year dissertation.

MTech Research Fellow at IITRAM Ahmedabad (2018-08 – 2020-10)

Carried out an in-depth experimental study on joining aluminium alloys using friction-stir-welding and implemented DoE framework for machining optimization.

  • Carried out an in-depth experimental study on joining aluminium alloys using friction-stir-welding (collaboration with PDEU, Gandhinagar).
  • Investigated friction stir weldability and mechanical performance of commercial-grade AA8011-h14.
  • Executed FSW to join low-strength AA 8011-h14 and high-strength/ AA 6061-T6 with optimum strength.
  • Implemented the DoE framework to improve and optimize the machining parameters to obtain a surface finish below 2μm during the facing operation of the flange on the lathe machine. (Collaboration with JB Engineering, Gujarat).
  • Evaluated the feasibility of a cryogenic injection system and developed a portable setup to inject cryogenic fluid to control the temperature rise, enhance tool life and increase surface finish during machining operations.

Engineer – R&D at Usha Martin Ltd. (2013-10 – 2017-02)

  • Employed a drip lubrication system to prevent nylon thread breakage due to excessive heat generation during strand production for Combination Fishing Rope.
  • Coordinated development of 10 & 40-stranded crane rope with improved fatigue strength & rope flexibility by 10%.
  • Commissioned increased area compaction on the strand from 12 % to 15% for the existing 8-stranded Star Rope to achieve 5% higher breaking load, for WuJiang, China.
  • Oversaw development of rope with Grease Retention System in IWRC for Uralkali – Russia (grease holding capacity app. 23% by weight), to minimise depletion of lubricant in rope during operation.
  • Successfully implemented the development of high-speed and special-purpose elevator ropes, serving clientele such as Liebherr, Schindler, Kone, Mitsubishi, Hitachi, etc.
  • Introduced the use of Poly Core in 35 x 7S ropes to improve dimensional stability in rope diameter and studied the relation between cage speed and pay-off rotation for the existing Sun and Planetary Rope closing machine.

Project Trainee at GTRE-DRDO (2019-07 – 2020-06)

MTech Dissertation on "Modelling and Simulation of Actuation System for Automatic Nozzle Calibrator"

  • Performed calibration and data analysis for variable area exhaust nozzle system.

Education

PhD in Mechanical Engineering – IIT Patna (2021 – 2026)

MTech in Mechanical Engineering – IITRAM Ahmedabad (2018 – 2020)

B.E. in Mechanical Engineering – BMSITM Bangalore (2009 – 2013)

Skills

PhD CandidateMechanical EngineeringIIT Patna

Reviews