Tinisa Manimaran

Chemical Engineering graduate and Laboratory Analyst with hands-on experience in petroleum & petrochemical testing, tank/barge sample handling, and QA/QC under ISO/IEC 17025 & ISO 45001. Strong process knowledge from degree + production internships (5% waste reduction via data model). Skilled in lab coordination, SOP adherence, equipment calibration, flammable handling, safety inspections and shift work.

Ready for distillation plant operations, recovery yield optimization and safe solvent recovery.

Laboratory Analyst - AmSpec Testing Services - Singapore (Science Park)

(2026-06)

Transferred from AmSpec Malaysia on valid Singapore work pass | 8-hour rotating shifts

• Execute full-scope fuel oil, petroleum & petrochemical testing for cargo quality; coordinate with inspectors/operations for timely accurate reporting.
• Perform core & advanced analyses (flash/pour point, density, sulphur, viscosity, water, TAN, H2S, stability, compatibility, ash, ICP, GC-MS) per ASTM/IP methods.
• Validate data & calibrate equipment for high-throughput accuracy; verify results before Chemist/Supervisor submission; ensure safe sample/reagent handling under ISO 17025 & 45001.

Laboratory Analyst - AmSpec Inspection Malaysia Sdn Bhd - Tanjung Pelepas

(2025-12 - 2026-05)

Selected for transfer to Singapore laboratory | Promoted to Team Lead within 3 months

• Conducted fuel oil testing & inspection on ship tanks, barges & manifolds; performed critical + advanced analyses (TSE/TSA/TSP, TAN, H2S, stability, compatibility, ash, ICP, GC-MS).
• Validated data for international standards compliance; supported process/quality troubleshooting. As Team Lead: oversaw daily ops, optimized workflow, prepared COQs, coordinated with inspectors/ops teams.

Trainee, Production Department - IOI Palm Wood - Segamat, Johor

(2024-07 - 2024-10)

Degree Internship | Production & Quality Focus

• Monitored lamella drying & quality tests (thickness, bonding, warping, moisture) for standards compliance; supported equipment inspections & preventive maintenance under ISO 45001.
• Project: Built data model for Lamella Volume & Data Loss Analysis — reduced material waste by 5%.

Trainee, Production Department - Top Glove Factory 30 - Klang

(2020-12 - 2021-06)

Diploma Internship | Latex Compounding & Process Control

• Monitored latex compounding; performed quality tests (viscosity, pH, mechanical strength) and data analysis for process control & troubleshooting.
• Drove continuous improvement via root cause analysis and corrective actions on mixing protocols and dilution/dosing.

Bachelor of Chemical Engineering (Hons.) - Chemical Engineering - University Malaysia Perlis (2021-10 - 2025-07)

Diploma in Petrochemical Process Engineering - Petrochemical Process Engineering - Tun Syed Nasir Syed Ismail Polytechnic (2018-06 - 2021-02)