Eren Yaylaci
Mechanical Engineer and M.Sc. candidate specialized in CFD, conjugate heat transfer, aerodynamic analysis, and advanced thermal management systems
Bu kişiyi işe al
Bu adaya doğrudan iş teklifi gönderin
Hakkında
Mechanical Engineer and M.Sc. candidate specialized in CFD, conjugate heat transfer, aerodynamic analysis, and advanced thermal management systems. Experienced in ANSYS Fluent, UDF development, mesh generation, parametric CFD studies, and model validation through defence-industry, UAV, TÜBİTAK, Eurostars, and industrial R&D projects. Strong background in thermal-fluid simulations, PCM/MPCM-based energy systems, and technical reporting for engineering applications.
Deneyim
Undergraduate / M.Sc. Researcher (Thermal Sciences Group) - Kocaeli University | International Joint Laboratory for Low Carbon and New Energy R&D - Kocaeli, Türkiye
(2025-05)
Conducted CFD and thermal management research within Prof. Dr. Müslüm Arıcı's research group, contributing to research activities associated with the International Joint Laboratory for Low Carbon and New Energy R&D.
- Built and validated 3D conjugate heat transfer CFD models of two railway traction transformer projects for Sönmez Trafo in ANSYS Fluent.
- Wrote a custom User-Defined Function (UDF) in ANSYS Fluent to capture temperature-dependent oil properties.
- Investigated the effects of oil type and inlet flow distribution on cooling performance for the latest transformer project, comparing 3 oils (Midel 7131, mineral oil, natural ester FR3) across 9 operating cases and finding that flow distribution alone can shift hot-spot temperatures by up to 3.6 °C.
- Found that the high-voltage (HV) windings remain the hottest zone (up to 105 °C) regardless of oil or flow configuration, supporting cooling design recommendations for the manufacturer.
Simulation and Modelling Engineer (R&D Department) - İstanbul Teknik İnşaat A.Ş. - İstanbul, Türkiye
(2024-02 - 2026-04)
Progressed from TÜBİTAK 2247-C Research Intern to Simulation and Modelling Engineer on the Eurostars project "Flame Retardant and Energy Saving Microcapsules for Thermal Comfort in Buildings", working with partners Betek Boya, Ensatec SLU, and Phase Change Material Products Ltd.
- Built and validated a DesignBuilder energy model of a PCM-enhanced pilot building against real measurement data, matching results within 6.7% in winter and 7.5% in summer.
- Modelled a 15 mm PCM-enhanced plaster across Turkey's 6 climate zones, finding 3.07%-4.84% annual energy savings and up to 8.5% lower cooling loads.
- Showed that increasing the PCM plaster thickness to 20 mm cut total energy use by up to 10.62% in uninsulated buildings.
- Prepared R&D project reports and delivered technical presentations at periodic Eurostars project evaluation meetings.
Researcher - TÜBİTAK 2209-A Project - Türkiye
(2024-04 - 2025-04)
Project: Modelling of Solid-Liquid Phase Change Using the Cubic Spline Approach
- Built eight numerical algorithms for 1D solid-liquid phase change (melting/solidification) problems, covering Cartesian and cylindrical coordinates under fixed-temperature and convective boundary conditions.
- Applied the Cubic Spline Approach alongside the Finite Difference Method, reaching solidification errors as low as 0.02% versus 0.15% for Finite Difference under matched conditions.
- Validated the cylindrical convective model against ANSYS Fluent with only 0.40% error, delivering the first cylindrical-coordinate application of the Cubic Spline approach reported in the literature.
CFD Application Engineer Intern (R&D Department) - Volinor Savunma A.Ş. - Türkiye
(2023-06 - 2023-09)
- Performed CFD and aerodynamic flow analyses in ANSYS Fluent to support defence industry R&D projects, evaluating flow behaviour and aerodynamic performance of system components.
- Built PyANSYS automation scripts to streamline parametric CFD setup and post-processing.
- Supported mesh generation, boundary condition setup, and post-processing across multiple CFD case studies.
Mechanical Team Member/Leader - KOUSTECH UAV - Türkiye
(2021-10 - 2022-11)
- Performed UAV maintenance, mechanical design, and structural FEA simulations of aerodynamic components.
- Led UAV manufacturing operations using composite and conventional production methods.
- Selected as a finalist in the TEKNOFEST 2022 Fighter UAV Competition with the Hancer PT-03 UAV.
Eğitim
M.Sc. - Mechanical Engineering - Kocaeli University (2025-09)
B.Sc. - Mechanical Engineering - Kocaeli University (2020-09 - 2025-07)




