Jeremiah Martinez
Field Safety Supervisor/Manager CSST
Hire this person
Send a job offer directly to this candidate
About
16 years of diversified experience related to the oil and gas industry. Hands on field experience as well as the ability to read blueprints for mechanical assemblies with electrical system checks interface. Authorized to work in the US for any employer
Experience
Field Safety Supervisor/Manager CSST - JT Thorpe - Leetsdale, PA
(2022-08)
Making sure all employees have new hire orientation/ all required PPE as well as fit test verification and a run down of the facility to inform employees of exits/ evacuation routes, and lunch tents etc. Gathering all information to complete Incident reports. Held toolbox meetings to ensure employees were up to date of current situations/ what is expected of them from a safety standpoint.
In contact with employees while in the field to ensure they have everything to perform their job task safely. Inspect harness/PPE making sure they are in working order. Safety audit’s being performed daily to keep a safe environment for all contractors/personnel.
Verifying all paperwork contractors have in place before any job task has started/confined space. Making sure all employees are aware of the dangers/hazards of not verifying scaffolding is updated before any work is performed. Construction site knowledge as well as refinery atmosphere and its respected field.
Field Safety Technician/CSST - Hi-Tech Industrial Services - Deer Park, TX
(2022-05)
Held toolbox meetings to ensure employees were up to date of current situations. Making contact with employees while in the field to ensure they had everything to perform their task safely. Inspected harness/PPE and made sure they were in working order. Safety audit’s being performed daily to make sure we keep a safe environment for all contractors/personnel. Always making sure contractors have all proper paper work in order before any job task has started/confined space.
Field Safety Technician/CSST - Refractory Construction Services - Kemah, TX
(2018-01)
Hold toolbox meetings as well as bump 4gas monitor’s for employees. Performed daily audit’s per client. Familiar with incident/ investigation reports etc. Make sure all proper paper work is in place for confined space entry/initial job task that is prior to begin.
Always taking the initiative to communicate with employees about PPE. Body Positioning and coaching employees about pneumatic/ battery powered/ hand tools and equipment. Top priority is safety, to keep employees safe and aware of the possible dangers and the potential hazards that come with the job that is given day in and day out.
Refractory Craftsman - Turn 2 - Baytown, TX
(2018-01)
Bolt-up/tear-down of machinery/equipment. Entering crawl spaces/confined spaces with proper PPE to perform work assigned/everyday duties. Always being tied off when above or working within high elevations. Working with power tools/hand tools to complete job task. Always being prepared for all weather elements due to working in a refinery atmosphere and being able to perform duties given.
Refractory Craftsman - Refractory Construction Services - Kemah, TX
(2015-01)
Duties and responsibilities consists of tearing off old K-wool/modules to the shell, having to spot grind and welders having to weld anchors back on in their proper place. Replacing foil as well as K-wool/ modules. Working in a refinery consisting of multiple tasks and execute those responsibilities in a safe manner.
Working off a scaffold in a noisy environment, climbing flights of stairs to correct floor level. Working in a confined spaces with limited space and light using a full -face/half-mask respirator.
Assembly Technician - Honeywell International Inc. - Houston, TX
(2017-01 - 2018-10)
Assisted in mechanical & electrical Assembly of Experion series C-300 cabinets: Assembled and routing I/O link, FTE, ground, and power cables of network systems using SOS procedure, Blueprints, Build of Material (BOM), and Total Planning Configuration (TPC) lay-outs. Performed hardware verification, continuity, ohm check, system power check, alarm test, RAM charger test, cabling (FTE/IO link) validation, mechanical and functional test of Honeywell Experion's Series C300 control systems to ensure the system worked according to specs. Become the custom assembly work area process expert and through observation and waste elimination continuously improving the processes to increase Safety, Quality, Delivery, Floor Space Utilization and Customer Satisfaction/Service while decreasing Cost.
Using rapid problem solving methodology to correct problems/defects, identify the root cause, and put in countermeasures to prevent re-occurrences. Uses learned skills and instructions such as assembly methods to ensure consistency of manufacturing. Applies new knowledge to work performed and can easily train others.
Find opportunities to improve the assembly and wiring processes. Easily adapt and chang
Maintenance/Helper - Refractory Construction Services - Kemah, TX
(2015-01 - 2017-12)
Working in a refinery consisting of multiple tasks and execute those responsibilities in a safe manner. Working off a scaffold in a noisy environment, climbing flights of stairs to correct floor level. Working in a confined spaces with limited space and light using a full-face respirator.
Duties included chipping away old material off surfaces, walls and spaces that were 3 feet in diameter. Cleaning duties included transporting buckets filled with material. Storing materials back onto designated areas of work to have the units staged for future use.
Mechanical Assembler - National Oilwell Varco - Houston, TX
(2014-01 - 2015-12)
Duties consist of building (HPU) Hydraulic Power Units. Start off by bringing in the skid into the shop cleaning it thoroughly. Running electrical to designated areas on the unit for motors and electrical start up boxes.
Cutting and crimping of hoses for hydraulic use on the unit. Connecting of motors to their correct pumps for installation on (HPU). Preparing other various parts for installations consists of multiple small parts to larger parts that can only be moved by forklift truck or an overhead crane.
Wiring of electrical boxes to terminate wires to correct places and components within its family.
AC Technician - Graves Mechanical - Houston, TX
(2010-01 - 2012-12)
Start up AC Technician performed duties that included reading construction blueprints, the rewire of occupied as well as unoccupied floors. Mounting/unmounting thermostats for possible relocation. Air balance the amount of air of each grille in that zone to ensure the proper airflow is correct. Change out air filters in Liebert rooftop units, fan power boxes (FPB) and variable air volume boxes (VAV).
Mechanical Assembler - National Oilwell Varco Brandt - Conroe, TX
(2006-01 - 2009-12)
Assist and perform assembly and installation of shakers, agitators and by-pass valves. Perform system checks including start up, voltage and amp correction, wiring and grounding of respective units. Duties involved interaction with design groups which required in depth blueprint knowledge. Also assigned the task of ensuring quality compliance on products such as the Cobra Shaker and its respective families.