Patrick Ford

Water Transfer at Ez chem (2023-07 – 2023-10)

• Run frac locations.
• Run pumps and booster with automated hmi.
• Run frac locations manual.
• 100-150bbls downhole.
• Rig up/rig down water pumps for frac locations.
• Check line and fix leaks.
• Fuel pumps.

Water Transfer at Apollo oilfield services (2022-12 – 2023-07)

• Run frac locations.
• Run pumps and booster with automated hmi.
• Run frac locations manual.
• 100-150bbls downhole.
• Rig up/rig down water pumps for frac locations.
• Check line and fix leaks.
• Fuel pumps.

Water Transfer at Select Energy (2021-07 – 2022-12)

• Run frac locations.
• Run pumps and booster with automated hmi.
• Run frac locations manual.
• 100-150bbls downhole.
• Rig up/rig down water pumps for frac locations.
• Check line and fix leaks.
• Fuel pumps.

Pipe Layer at DNT Construction (2021-03 – 2021-06)

• Excavate and lay water/sewer lines.
• Water services etc.

SWD Operator at Clear Water Resources (2018-12 – 2020-09)

• Oversee the disposal of chemicals, oil and salt water.
• Routine maintenance on equipment and pumps.
• Keep facility running and in good production during my 12 hour shift.

Heavy Equipment Operator at Dam waste and recycling (2019-06 – 2020-03)

Run an excavator/skid steer at a recycling yard. We recycled shingles, C&D, Metal and Aluminum. I'd pick and clean through the loads with the excavator and then push them up into the correct piles

Water Transfer at TinCup Water Solutions (2018-03 – 2018-12)

• Layed poly from water pits to drilling rigs.
• Rigged up water pumps.
• Rigged up water lines, diesel lines, obm lines, water based mud lines on drilling rigs.

SWD Operator at Fortress enviromental (2016-04 – 2017-07)

• Cleaned frac tanks.
• Offloaded salt water into our tanks.
• Ran 18 wheeler to pull water out frac tanks and pump down hole.
• Moved frac tanks to wash out bays with winch truck.
• Run the backhoe to move and dispose of hazardous waste and materials.
• Keep all equipment and machinery up to date on pms.

Swamper at Steve Kent Trucking (2015-05 – 2015-12)

• Cleaned frac tanks/cellars.
• Did pms on all 18 wheelers.
• Responsible for all Brakes, wheel seals, electrical, valves on all 18 wheelers.

Swamper at Mj oilfield services (2014-10 – 2015-05)

• Cleaned frac tanks and washouts on vacuum trucks

Service Technician at Stallion Oilfield services (2013-06 – 2014-05)

• Moved living quarters for drilling rigs.
• Delivered generators and light towers.
• Serviced generators and light towers.
• Helped in mechanic shops on downtime.

Assembler at Minigrip (2012-04 – 2012-12)

Observe machine operations to ensure quality and conformity of filled or packaged products to standards.

• Adjust machine components and machine tension and pressure according to size or processing angle of product.
• Tend or operate machine that packages product.
• Remove finished packaged items from machine and separate rejected items.
• Regulate machine flow, speed, or temperature.
• Stop or reset machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor.
• Secure finished packaged items by hand tying, sewing, gluing, stapling, or attaching fastener.
• Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels.
• Inspect and remove defective products and packaging material.
• Sort, grade, weigh, and inspect products, verifying and adjusting product weight or measurement to meet specifications.
• Clean, oil, and make minor adjustments or repairs to machinery and equipment, such as opening valves or setting guides.
• Monitor the production line, watching for problems such as pile-ups, jams, or glue that isn't sticking properly.
• Stack finished packaged items, or wrap protective material around each item and pack the items in cartons or containers.
• Start machine by engaging controls.
• Count and record finished and rejected packaged items.
• Supply materials to spindles, conveyors, hoppers, or other feeding devices and unload packaged product.
• Attach identification labels to finished packaged items, or cut stencils and stencil information on containers, such as lot numbers or shipping destinations.
• Clean packaging containers, line and pad crates, or assemble cartons to prepare for product packing.

Kinesiology in College – UTSA (2009-09 – 2012-02)

High school diploma or GED in Sports – Nixon-Smiley High School (1996-04 – 2009-05)