QUALITY CONTROL ENGINEER - AEROSTAR CORPORATION PTE LTD
(2024-06 - 2026-04)
Responsible for monitoring and ensuring compliance with project quality standards for surface preparation, coating application, and inspection activities.
- Observe, measure, and guide proper surface preparation, mixing, and application as per specifications and environmental conditions.
- Ensure all coating works comply with approved procedures, standards, and safety requirements.
- Monitor contractor performance and verify qualifications, equipment condition, and process compliance.
- Check ambient conditions, surface cleanliness, and material conformity before application.
- Measure and record coating parameters such as DFT and re-coating intervals.
- Identify, report, and follow up on non-conformances affecting coating performance.
PAINTING SUPERVISOR/INSPECTOR - COCHIN SHIPYARD
(2022-01 - 2024-04)
- Observe, measure, and make recommendations to our direct customers on the correct methods of surface preparation, mixing and application of our products in the correct weather conditions to meet the project coating specification.
- Record any non-conformance to relevant standards and practices as may affect the performance of coatings.
QC INSPECTOR (COATING) - CHINA PETROLIUM ENGINEERING AND CONSTRUCTION CORP. - ABUDHABI
(2020-07 - 2021-12)
Responsible for monitoring and reporting compliance with ADNOC quality standards and procedures the preparation and application of coating and surface treatments. Recommends methods to improve overall quality concerns.
- Observe, measure, and make recommendations to our direct customers on the correct methods of surface preparation, mixing and application of our products in the correct weather conditions to meet the project coating specification.
- Record any non-conformance to relevant standards and practices as may affect the performance of coatings.
- Ensure ambient conditions are acceptable for required process output.
- Verify that performing the construction under a Quality Control System and that it is maintained fully operational during the construction for all areas of concern.
- Monitor performance of contractors, ensure Applicators are competent and where required have valid certification for the process in use, equipment is in serviceable condition.
- Ensure inspection and test equipment is serviceable, within calibration period and personnel are knowledgeable in its use.
- Ensure blast medium and coating materials conform to project specifications.
- Monitor dry film thickness and re-coating intervals.
- Responsible for timely inspection during fabrication and construction, proactive in the prevention of non compliance and problem resolution.
QC INSPECTOR (COATING) - NSH CORPORATION, SAUDI ARABIA - SAUDI ARABIA
(2018-06 - 2020-06)
Responsible for monitoring and reporting compliance with SAUDI ARAMCO quality standards and procedures the preparation and application of coating and surface treatments. Recommends methods to improve overall quality concerns.
- Perform inspections in accordance with the SATIP (Saudi Aramco Typical Inspection Plan).
- Ensure ambient conditions are acceptable for required process output.
- Ensure that material is stored and handled in accordance with manufacturers requirements and data sheets are available, when required, material traceability is maintained and correct material used.
- Monitor performance of contractors, ensure Applicators are competent and where required have valid certification for the process in use, equipment is in serviceable condition.
- Ensure inspection and test equipment is serviceable, within calibration period and personnel are knowledgeable in its use.
- Ensure blast medium and coating materials conform to project specifications.
- Monitor dry film thickness and re-coating intervals.
PAINTING INSPECTOR - GLOBAL INDUSTRIAL AND MARINE COATING
(2017-01 - 2018-05)
Coating Specialist - Caspian S C (Offshore) Azerbaijan - Azerbaijan
(2016-01 - 2016-12)
Observe, measure, and make recommendations to our direct customers on the correct methods of surface preparation, mixing and application of our products in the correct weather conditions to meet the project coating specification. Record any non-conformance to relevant standards and practices as may affect the performance of coatings.
- Verify that performing the construction under a Quality Control System and that it is maintained fully operational during the construction for all areas of concern.
- Patrolling frequently to observe compliance with the Technical Specifications and Quality Standards.
- Responsible for the quality of application of our paints by inspecting and controlling the project.
