Clean Technician - AAR COMPONENT SERVICES(THAILAND).COM - Amata City Chonburi Industrial Estate, 700/160, ตำบล บ้านเก่า Pantong District, ชลบุรี 20160
(2568-11 - 2569-05)
- Record the details of the repaired item after it's finished before packing it into a box and sending it to the customer.
Technician Electrician - Nestle Purina PetCare (Thailand) Co.Ltd. - 7/279 Amata City Industrial Estate Moo6, Soiphonprapha, Mabyangporn, Pluakdaeng, Rayong 21140
(2567-08 - 2568-07)
- The Nestlé project handles electrical work as assigned by the head of the agency such as contractors installing wiring closets connected to equipment checking and reporting the head.
- Check the status of electrical equipment such as relay breaker sensor radar temperature measurement flow detection Plc.
- Repair fix and find the cause of problems with the electrical systems used in the production line.
- Make Pm is planned as planned and planned for maintenance and check points such as ohm,amp,watt.
- Make PM In case of a breakdown machine for more than 30 minutes, determine the cause and initial corrective action by collecting realistic and bottom-line information and finding solutions to keep it from happening or decreasing.
- Check all wiring drawers in the wiring closet that the project department has planned to use for troubleshooting and wiring checks as well as fault points in the drawing circuit.
- Check the gas system gas piping system and equipment used for gas ignition including safety equipment and operating system used in the manufacturing process
- Including a heat pump (hot water heater) that replaces gas It will work in the hybrid system.
- Check Scada for operation and flow, transmission, attraction, and high-low values of the equipment at various points, including the motor'sHz value, according to the flow of the process.
Technician - Canadian Solar Manufacturing Thailand Co.Ltd - Rojana Bowin Industrial Estate, Chonburi Province
(2566-01 - 2567-08)
- Repairing machinery in the production line
- Make a monthly Pm plan
- Check for spare parts and notify the supervisor
- Maintenance of machines in responsible areas including laminate machines frame assembly machine Welding machines, robots and all the machines in the back panel production section
Technician,Facilities - INTHIPLEX TECHNOLOGY (THAILAND) CO.LTD - Hi-Tech Industrial Estate, Ayutthaya Province
(2565-04 - 2566-01)
- Strictly follow the team leader's instructions as assigned by the task leader, including creating complex circuits according to understandable symbols.
- Repairing machines in the production line. And report it to the chief day and night We'll video call each other.
- Make PM according to plan Make a PM during the day according to the plan given by the head of the assignment, including a shift to switch with teammates.
- The work will be supervised by a specialist leader
- Cleaning
- Heat exchanger
- Change oil filter
- Temperature Control
- Control wiring
- Leak test heat exch
- Change oil lubrication
- Clean oil lubricating filter
- Grease ports
- Oil spring damper
- Check rubber for spring damper
- Check install exit tube interlock
- Install drip lube system
- Make support for refuel
- Move DVS. reset switch
- Install steel box connector
- Adjust position wire control from M/C to cabinet control
- Install CDA. savings interlock
- Install maniflod air
- Install pressure switch
- Replace wire for LED light
- Replace roller dancer arm
- Move position part conuter
- Check air from Brake/Cut
- Check level oil mister
- Testing
- Work as assigned by the supervisor.
- Cleck list Air Compressor.
- PM Air Compressor according to the plan.
Technician - NIDEC SHIBAURA ELECTRONICS (THAILAND) CO.LTD. - Bangkadi Industrial Park, Pathum Thani Province
(2561-07 - 2565-03)
- Maintenance of machines in the production line
- Take care of maintenance of the machine to be in a ready-to-use condition at all times
- PM the machine only in the responsible area along with supporting documents for making PM and
- Check the breakdown in the sparpart, including the spare parts supply records and documents, send the report to the supervisor.
- Monitor the operation of the machine, if it is found that the machine is not working properly or if any parts start to wear and tear report it to the working group. and make arrangements before editing
- Support Vender Follow up on the part that the Vender checks or fixes
